Baking soda is known as a stain remover. It can help to remove liquid stains such as tea, wine or coffee. It also helps to remove the unpleasant smells. It is quite affective on solid surfaces in general but it is not advised to use baking soda directly on natural stone surfaces.
'Never clean marble countertops with baking soda. This could damage or wear down the sealant over time, causing it to lose its shiny sheen,' the expert says. 'Additionally, since natural stone such as marble, quartz, or any other type is an expensive material, any damage may be expensive to restore.
Acidic commercial cleaners and those containing harsh chemicals, like bleach, can damage and dull natural stone surfaces.
Apply a paste of baking soda and water over the stain and leave it for 24 hours. Gently scrub the area and rinse it with plain water. Stains on Sandstone pavers, Travertine floor tiles, and Marble floors can easily be cleaned with a baking soda solution.
An oil-based stain will darken the stone and normally must be chemically dissolved so the source of the stain can be flushed or rinsed away. Clean gently with a soft, liquid cleanser with bleach OR household detergent OR ammonia OR mineral spirits OR acetone.
Use a 1/2 cup of any of the following: ammonia, bleach, or hydrogen peroxide and a gallon of water. Reminder: do not mix bleach and ammonia. On light colored stones, clean with bleach or hydrogen peroxide. On dark colored stones, clean with lacquer thinner or acetone.
Avoid citrus or vinegar cleaning agents
Both these elements will cause the Travertine surface to dull. Acidic substances like lemon, orange peels, baking soda, vinegar slowly may penetrate the surface to cause irreparable damage.
It's essential to only use cleaners which are appropriate for natural stone surfaces. This means avoiding using vinegar. Stones like limestone, marble, or travertine will react to vinegar because it's an acidic cleaner with harsh effects.
Removing Stains from Travertine Tiles
Try mixing baking soda with water to form a paste and rub it into the tiles. Allow the thick paste to sit on the tile for 15 minutes before cleaning it off. Never use harsh cleaners or take drastic measures in an attempt to remove stains from travertine tile.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Change the rinse water frequently.
Not sealing a stone countertop or floor tiles — which get the heaviest traffic and are the most susceptible to wear and tear — leaves the surface vulnerable to absorbing foreign substances, which can weaken the stone and potentially lead to the growth of bacteria.
Diluted hydrogen peroxide works well on Sandstone, Marble, Bluestone, and Travertine. In the case of Granite floor, simply brush the area in dry condition. No solution is required to cleanse moulds or algae from Granite floor.
Baking soda can usually be used on many metal surfaces but take caution with aluminum. You may be able to get away with using it if you quickly apply it and rinse it off. Leaving it on can cause it to oxidize which would change the aluminum's surface color.
NOTE: Don't use baking soda for cleaning glass surfaces, silverware, stone countertops, and wooden floors or furniture. Also, dermatologists warn against using baking soda routinely as a dry shampoo or underarm deodorant, because its alkalinity will disrupt the natural acidity of skin and scalp.
Simple Green Granite & Stone Polish is safe for use on granite, marble, travertine, limestone, porcelain, ceramic, quartz, Corian®*, Silestone®*, and other natural and engineered stone surfaces.
To maintain the luster and shine of your natural stone, use a stone-safe polish about once a week. To polish stone, simply spray the polish directly onto the surface, then buff the surface until it's dry with a lint-free cloth or dry paper towel.
Add undiluted vinegar to a bucket and apply it to your stone with the plastic brush. See if it removes the white residue. If it does then you don't need to use muriatic acid. If you need the muriatic acid you'll have to dilute it according to the directions on the bottle.
Consider purchasing a floor cleaner formulated for travertine to use regularly. The label should clearly state if the cleanser is formulated specifically for travertine. Opt for a cleanser with a neutral pH of 7 or below. You can also use mild dish soap to clean travertine floors 3-4 times per year.
Baking soda is efficient enough to clean the bathroom tiles on its own. Its ingredients are powerful enough to eradicate dirt and stains on the tiles. Apply baking soda on the tiles and leave it alone for a few minutes. After that, all you need to do is clean the tiles.
For optimal results, baking soda can be applied to the patio's trouble areas a couple of hours before scrubbing. For particularly problematic areas, use bluestone formulated alkaline cleansers.
And in this case, this mixture does not work well with the natural stone countertops. Due to the fact that vinegar is acidic substance and baking soda is caustic, the result of mixing the two can have an unstable effect on stones that are porous.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time.
Keep It Simple to Clean Natural Stone
You can use any type of mild soap detergent, such as dish or hand soap, and mix it with a little water. Wet the stone first, and then use a bristle brush and soap solution to wipe the stone clean. The last step is to make sure you rinse thoroughly.