To clean concrete, exterior siding or an asphalt driveway, you'll want at least 2,000 to 2,800 psi and 2 to 3 gpm (4,000 to 8,400 ECUs).
There's no doubt that electric pressure washers from 1,300 to 2,300 psi can wash a concrete driveway, but it'll take longer. If you have a large driveway with lots of stains, you'll want more power to do the job faster. I chose the 3,100-psi gas pressure washer and cut the job time in half.
If you want to clean your driveway quickly and efficiently, use a pressure washer of at least 3100 PSI. Using pressure washers with pressures ranging from 1000 to 2300 PSI will also help you clean your driveway, but it will take a long time.
1000-2000 PSI
Good for light cleaning jobs or for jobs where the surface to be cleaned is soft and easily damaged. This pressure range is good for cleaning decks and siding and for light-duty auto cleaning.
Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.
Medium Duty 2000-2800 PSI
This classification ranges from as low as 2,000 PSI to as high as 2,800 PSI. You can use a medium-duty pressure washer for almost any surface. They're great for cleaning concrete, brick, and wood.
Often more affordable than higher strength concrete, 2,500 PSI can be useful for driveways and walkways. However, some may choose a stronger concrete, like 3,000 PSI, to avoid excessive cracking. A good use for this concrete is a walkway on the side of a home that doesn't receive excessive traffic.
Light-duty pressure washers are rated at 2,000 PSI or less and are suitable for cleaning automobiles, motorcycles, boats, bicycles and all-purpose cleaning. Medium-duty pressure washers produce 2,000 to 3,000 PSI and can be used to remove grease and grim from concrete, sidewalks, decks and siding.
Mid-Range Power: 2,000 to 3,200 PSI
The most versatile category of pressure washers, those ranging from 2,000 to 3,200 PSI effectively clean cars (including the most well-used off-road vehicles), home siding, fences, boats and grimy garage floors. Those closer to 3,200 PSI work effectively on tough stains, too.
For starters, too much pressure on windows can easily cause the glass to shatter, so you should never use a PSI over 2,000. Furthermore, you need to adjust the spray to its widest angle on a 40- or 65-degree nozzle and use a spray pattern that avoids perpendicular pressure on windows.
Most people believe that concrete is solid and almost invincible. However, using a pressure washer with the incorrect tip or using too much pressure or a combination of the two can etch concrete.
Soft surfaces, such as decks and siding, usually require more cleaning power than harder surfaces such as driveways. For hard surfaces, such as concrete and brick, a higher PSI pressure washer with 2000-3000 PSI of water pressure is ideal. Such a device can effectively clean dirt and grime from these hard surfaces.
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively.
To clean a deck, some homeowners choose a washer with a pressure range of 1,300 to 2,400 psi, the same as washing a car. HGTV recommends working with the lowest pressure that cleans your deck materials gently: about 500 to 600 psi for soft woods like cedar or pine, and up to 1200 to 1500 psi for pressure-treated wood.
Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi). Determine whether you will rent or buy your machine.
Use Concrete Sealer After Power Washing
It soaks up everything! An effective pressure wash cleans the pores of your concrete. Make sure to apply concrete sealer after pressure washing. As a rule, concrete over two years old is safe to power wash with a walk-behind unit.
You should also never set your pressure washer above 2,200 psi when washing your car. 1,500 psi is really all you need to get a good deep clean; any pressure higher than that won't make a noticeable performance difference.
2,000 - 2,900 PSI: This is a moderate strength unit used heavier residential tasks. These units are commonly sold as either electric or gas pressure washers. 3,000 - 6,900 PSI: These high pressure models are what professional pressure washers and contractors usually use.
Every home is unique, from its square footage to the materials it's made from, making it difficult to give an exact estimate. For example, a 2,000 square foot home can take anywhere from one to three hours to power wash.
It's simply a measure of how much force the water hits with and helps you understand its ability to remove stuck-on debris. As you might guess, the higher the PSI, the more power the water has, so bigger is better in many cases.
Best for home and shop use, these sturdier, more powerful units make it easy to clean everything from exterior siding and fences to patios and decks. Heavy Duty and Commercial: Heavy-duty pressure washers start at 2800 PSI at 2 GPM or more.
For most cars, a psi between 1200 and 2200 is recommended. This range provides enough cleaning power to remove dirt and grime without damaging the car's paint or delicate surfaces. Yes, you can use soap with a pressure washer.
For instance a foundation is 3,000 PSI, sidewalks are 3,500 PSI, front steps are 3,000 PSI, etc. 3.) What are Typical Specifications for a Quality Sidewalk? Concrete for sidewalk slabs must consist of 3500 to 4000 PSI, a combination of 3/4 blend of sand, stone and cement and also 6 to 7% air included in the mix.
Concrete footings and slabs on grade typically require a concrete of 3,500 to 4,000 psi. Suspended slabs, beams, and girders (as often found in bridges) require 3,500 to 5,000 psi. Traditional concrete walls and columns tend to range from 3,000 to 5,000 psi, while 4,000 to 5,000 psi is needed for pavement.
The higher the PSI the more durable your concrete will be and will thus be resilient to cracking. The average residential project uses a minimum of 2,500 to 3,000 PSI; however if you're concerned about cracking then we recommend talking to your concrete contractor about stronger products on the market.