The standard sink size is about 22 inches long to 30 inches wide, but once again it's crucial to take proper measurements. If you're replacing a drop-in sink with rims, start measuring from the outer lip of the sink, not the basin itself. If you have an undermount sink, start measuring where the edge meets the counter.
YOUR MADE-TO-MEASURE KITCHEN SINK
Kitchen cabinet dimensions are largely standardised and generally range between 40cm and 120cm wide, or 16 and 36 inches.
Most base cabinets come in widths that accommodate the standard kitchen sink sizes. A 30-inch wide or a 36-inch wide cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33 x 22-inch sink will fill a 36-inch base cabinet.
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
Kitchen Sink Sizes
In general, the standard sink size is 22” x 30”. While single bowl sinks can have a width upto 36 inches, double bowl sinks can go upto 48 inches.
Most Popular By Configuration. Single basin, apron/farmhouse, workstation, and double basin kitchen sinks are the most popular sink styles for the upcoming years.
Another larger option, that provides more variety in its use is a 29" double bowl sink. This sink will fit in your 30" kitchen sink base cabinet and provide you with two 16x13"basins.
Standard Kitchen Sink Sizes to Know
On average, customers who purchase single-bowl sinks prefer 30-inch-long dimensions at most. Experts recommend at least 22 to 27-inches in length, which also works for small kitchens.
A 33" cabinet is outside measurement. Figure 3/4" wall thickness, so the inside measurement of the cabinet is 31½". You can possible squeeze the sink in there. It will be difficult to get at the side clips.
Start by measuring the depth of your cabinet. Place your tape measure along the bottom of the cabinet and measure from the back to the front edge. Next, measure the total width. Place your tape measure along the bottom of the cabinet to measure from the left edge to the right edge.
Base cabinets are usually shorter than sink base cabinets, and they don't have a built-in sink. Sink base cabinets, on the other hand, are designed to accommodate a kitchen sink. They're also often deeper than base cabinets, giving you more storage space for larger items.
A typical bathroom sink faucet has a supply line that is 3/8″ diameter. The most common size for supply lines is 3/8″, but there are also 1/2″ and 5/8″ sizes. The size of the supply line should match the size of the faucet body. A larger faucet will require a larger supply line, and vice versa.
Double bowl sinks typically have a width of 22 inches but can be as wide as 48 inches.
Commonly, the 31-inch sink is the size of a double-basin sink that offers one side for washing and the other for rinsing. Some double-basin sinks have one sink size that's larger than the other, while others are the same size.
The standard sink size is about 22 inches long to 30 inches wide, but once again it's crucial to take proper measurements.
The most common sink sizes for a 30-inch cabinet are 24 to 27 inches wide. These sizes offer a comfortable fit within the cabinet and provide enough room for daily use.
TIP: Standard cabinet sizes are in 3” increments. I.E.: 27”, 30”, 33”, 36”, etc. In general your sink should be at least 2-3” smaller than your cabinet size. For example, a 36” sink base cabinet can easily fit a 33” sink.
Dawn 22" Undermount Stainless Steel Kitchen Sink
This little gem measures overall at a little less than 22" left to right. This allows this sink to very easily fit in a 24" sink base cabinet.
The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length. Generally, sinks up to 30" will contain one large single bowl.
The reason for this is to allow for adequate room to work when installing the sink, as well as to avoid potential water damage or mold growth in the cabinetry. The minimum cabinet size needed for your sink will be found on the product page from our website once you search the model like the example shown below.
Single-bowl sinks are generally larger than double-bowl sinks, which can make them more convenient for tasks such as washing large pots and pans. They also offer more uninterrupted space for items such as a drying rack or cutting board. Single-bowl sinks are often less expensive than double-bowl sinks.
The answer can be derived from contemplating three main factors: the size of your kitchen, how you'll use your sink and your budget. If you have a large kitchen, you can definitely consider either a single or double bowl, but if you're short on space, you might want to lean toward a single bowl.