While it excels in preventing further peeling, some customers noted that it does not provide the same level of hiding as traditional primers. Overall, it is viewed as a valuable product for specific applications, especially when proper surface preparation is followed.
Drying Time- At normal temperatures Peel Stop will dry in one hour and may be primed or painted in two hours. Note: Peel Stop that has seeped under the edges of remaining paint layers or has filled minute cracks may take longer to dry than material on exposed surfaces.
Can you paint straight over Zinsser peel stop? You certainly can. Just allow your Zinsser Peel Stop at least two hours to fully dry, then you're free to paint over it with basically any product.
If applied correctly, it should dry to a slight sheen finish but your chosen topcoat will cover this without any issues. One coat is usually enough but particularly porous surfaces may need a second coat and it's ready for a topcoat after just two hours thanks to its water-based formula.
Applied over cracked, crazed, or checked surfaces, Peel Stop® acts as a flexible bridging primer to seal face checking and help prevent the finish coat from cracking, providing a sound surface for primer and paint.
Surfaces should be clean, dry, sound and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mildew, wallpaper adhesive, or any contamination that may interfere with adhesion. Remove any peeling and/or unsound coatings and loose fibers with a wire brush or sandpaper.
1 coat of Zinsser Gardz is generally all you need. It binds loose material and creates a moisture-proof film that can act as a barrier coat between a problem substrate and new decorating materials. This is slightly different to Zinsser Peel Stop, which also acts as a stabiliser, but remains breathable and flexible.
Lower temperatures and higher humidity can prolong dry time. Allow more time at cooler temperatures. If conditions do not permit prompt drying, allow Peel Stop to dry overnight before priming or painting Do not apply Peel Stop is rain is expected within 8 hours of priming or topcoating.
Once Peel Stop has been applied and allowed to dry, keep mould stains at bay with water-based primer, sealer, odour blocker and stain-killer B-I-N® AQUA. Recoat in just 45 minutes. Finally, apply a topcoat of PermaWhite® Mould Resistant Paint.
Peel Stop® is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates. Peel Stop® tightly bonds to old paint and problem areas forming a sound surface for new paint.
If you have various stains, shellac Bonding primer is the ideal choice. It can be used to cover rough surfaces and old varnish as well as metal and ceramic.
A popular choice is Zinsser's Peel Stop, which is a water-based primer that penetrates chalky surfaces and helps to glue-down the edges of cracking and peeling coatings to the substrate so they can be successfully painted over. It can be used on both interior and exterior applications in lieu of paint stripping.
This coating has been formulated for temporary use and is recommended to be removed within 6 months or less.
A light, or superficial, peel produces results that usually last between one and two months. A medium peel's results will last between two and six months, and the results of a deep peel last forever.
When all layers of paint lift away easily, it is ready for removal. If it does not reach this point after 72 hours, the product is not suitable for the paint system or will require a second application to remove the remaining layers.
You can paint over Zinsser Peel Stop after 2 hours.
There are a few other primers that are somewhat misunderstood to be be the type of product that will do what Peel Stop does. One such popular product is XIM brand Peel Bond High Build Bonding Primer/Sealer.
How to fix flaking paint on a ceiling with Paint Warrior 💪 Zinsser Peel Stop is a clear, flexible bridging sealer used to stop peeling, flaking, dusting, or chalking paint before filling and topcoating.
water based or alkyd primer or paint may be used over Peel Stop. As Peel Stop is clear, we recommend priming with Zinsser Bulls Eye 1-2-3® or Zinsser Cover-Stain®, followed by a coat of quality water based or alkyd paint to assure optimum results.
In most cases only one coat is necessary. Excessively porous surfaces may require a second coat. or stir well before using. Do not thin.
One of the primary causes of paint bubbling is applying paint on a dirty or poorly prepared surface. When the painting surface is contaminated with dust, dirt, grease, or other substances, it hampers the paint's ability to adhere properly. As a result, bubbles or blisters may form as the paint dries.
While it excels in preventing further peeling, some customers noted that it does not provide the same level of hiding as traditional primers. Overall, it is viewed as a valuable product for specific applications, especially when proper surface preparation is followed.
When dry, GARDZ may be topcoated with any standard architectural water-based or oil-based primer or topcoat. GARDZ is compatible with all types of joint compounds and spackling pastes and any texture or popcorn finish may be applied over it.