To determine if your heating system is gas or electric, check the unit's exhaust pipe, energy source, or the thermostat.
If you only have an electricity meter and no gas meter outside or inside your home, it's a clear sign you have an all-electric system. If you do have both, it's very likely your heating is gas-powered. Your gas and electricity bills will state which fuels your property is supplied with.
Carbon monoxide (CO) is a colorless, odorless, tasteless gas. A by-product of combustion, it can be produced by ordinary appliances, and is a common hazard in the home. Mild exposure can cause symptoms such as nausea, dizziness, or headaches; while severe poisoning can result in brain or heart damage or even death.
Furnaces typically last 15 to 20 years, but well-maintained units can often operate longer. If your furnace is 25 years old, it likely means you've been maintaining it properly by scheduling annual maintenance and routine care. However, its age puts it at a higher risk for increased repairs and a complete breakdown.
Yes, a heating system can use both gas and electricity simultaneously or alternately, most commonly known as a dual-fuel or hybrid heating system. This setup pairs an electric heat pump with a gas furnace to maximize efficiency, using electricity during moderate weather and switching to gas when it is very cold.
A simple visual inspection can easily tell you if your heater is gas or electric. If you're inspecting your heating unit and you see a flame, you have a gas heater. The flame is usually blue, and you will be able to see it clearly through the small window on your heating unit.
The $5,000 rule is a guideline to help homeowners decide whether to repair or replace their HVAC system. You multiply the age of your unit by the cost of the needed repair. If that number exceeds $5,000, replacing your HVAC system is often more cost-effective.
The heat exchanger is often considered the most costly part of a furnace to repair or replace. It is a critical component that transfers heat from the combustion process to the air that circulates throughout your home. Over time, heat exchangers can crack due to the constant heating and cooling cycles they undergo.
Yes, you should highly consider replacing a 30-year-old furnace. Most furnaces have a lifespan of 15 to 20 years. At 30 years old, your system has likely outlived its expected life. It is operating at a much lower efficiency than modern units and presents a significantly increased risk of catastrophic breakdown or dangerous carbon monoxide leaks.
Yes HVAC prices have steadily increased over the past few years, and 2026 is no exception. These increases are affecting everything from entry-level systems to high-efficiency units, making it more expensive than ever to install or replace HVAC systems.
It takes time for your home to warm up and cool down. If you're not sure how long it takes, try turning the heating on about 30 minutes before you need it. You should turn it off 30 minutes before you'll stop needing it.
Heat stress and heat exhaustion can quickly escalate into medical emergencies. Three common symptoms include:
Ventilation in the room you are heating is very important. Check that the room you are heating has air vents and that these are not blocked. If you do not have air vents you should keep a door or a window open to allow the movement of air in and out of the room.
One of the most important parts of the gas heater service is a carbon monoxide check to ensure your heater is not affecting your health. Carbon monoxide poisoning can cause headaches, fatigue, and can even kill you. So if you are using gas heaters, ensure you get them serviced regularly by a qualified gas fitter.
Broadly, heat pumps are the most efficient form of heating. They can be more expensive than a furnace, especially if you purchase a geothermal heat pump. However, geothermal heat pumps are one of the cleanest heating options on the market. A geothermal heat pump can produce 1/6th the CO2 of a natural gas furnace.
To calculate the cost of running a 1500-watt heater for 24 hours in the US, you need to know the electricity cost per kilowatt-hour (kWh). If the average cost is about 16 cents per kWh (as of early 2023), the heater uses 1.5 kW x 24 hours = 36 kWh. Therefore, the cost would be 36 kWh x 16 cents = 5,76.
Credit Calculation
The furnace tax credit equals 30% of your total qualifying costs, including both equipment and installation expenses, up to a maximum of $600 per furnace. Homeowners can claim 30% of the costs for upgrading heat pumps, with a maximum cap of $2,000.
Average Cost to Replace a Furnace
However, the cost of furnaces can range widely depending on their size, type, and efficiency, and homeowners can generally expect a new furnace to cost anywhere between $3,800 and $10,000. If efficiency is important to you, high-efficiency models can reach up to $12,000.
5 Warning Signs It's Time for Furnace Replacement
What fails first on a furnace? The most common early failures are the furnace ignitor or flame sensor, as they experience regular wear and tear and are critical to starting the heating cycle.
Homeowners insurance may cover the cost to repair or replace your furnace or boiler if it's damaged or destroyed by a covered peril. Covered perils as defined by your policy typically include events such as: Lightning. Fire.
If your income is limited and you're looking for an air conditioner, the U.S. Department of Energy's Weatherization Assistance Program (WAP) might be able to assist. The largest program of its kind in the country, WAP helps limited-income households improve their energy efficiency and reduce their energy costs.
The best time to buy a furnace is during the off-season, specifically late spring (April-May) or early autumn (September-October), when HVAC companies are less busy and offer lower prices, rebates, or promotions. Purchasing in these shoulder seasons ensures faster installation times and better negotiating power compared to winter peak season.
If you don't clean your furnace, dust and debris can accumulate, leading to reduced efficiency and increased energy bills. It may cause overheating, frequent cycling, or even complete breakdowns, resulting in costly repairs.
Most 2,000-square-foot homes need a furnace between 50,000 and 65,000 BTUs, depending on climate and insulation. Colder regions or older homes may need more heating power, while well-insulated houses in mild climates may need less.