Switch the thermostat to the off position. Locate the breaker that powers your HVAC system and turn it off. Wait 30 seconds and turn the breaker back on. Turn your thermostat back on and confirm it has reset properly.
Power down your AC: Turn off your AC unit and unplug it from the power source. This will ensure that you stay safe while working on the unit. Locate the reset button: Most air conditioning units have a reset button located near the outside unit. It is usually a small button located inside a small hole.
Faulty Wiring
If the wiring between the thermostat and the air conditioning system is faulty, the system may not turn on. This can happen if the wiring is old or if it has become damaged over time. To fix this issue, you may need to call a professional HVAC technician to inspect and repair the wiring.
Some air conditioning systems have a reset switch, which is a small, red button. Typically, the button will be on the outdoor unit. If you have a problem locating it on the outdoor unit, you may find relevant details on the equipment's manufacturer's manual. Press the red button for three seconds and release.
There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.
Shut off your system by hitting the isolation switch, wait 30 to 60 minutes and then turn it back on. This manual reboot fully disconnects your AC unit from power, allowing all electrical components to reset.
One possible reason your AC is not reaching the set temperature is that the thermostat could be dirty. If dirt, dust, or other debris has accumulated within the thermostat box, it can cause the wires to heat up or other issues. Thermostats are cleaned during routine HVAC maintenance to help prevent this from happening.
The main reasons your AC unit outside is not turning on could be something that has tripped the circuit breaker, something is blocking the fan's airflow, or the condensing unit is damaged. Other potential issues could be the thermostat isn't set correctly or the compressor could be malfunctioning.
First, check your filters and coils for dirt and debris that may be impeding airflow. Once you've cleaned the filters and coils, run the air conditioner with just the fan so that the ice accumulation can melt off. If the AC still doesn't blow cold air, it could be that refrigerant levels are too low.
The thermostat can be reset by power cycling. Power cycle the thermostat by removing if from the subbase and remove the batteries (some thermostats will not have batteries). Wait 10 seconds and then replace the batteries and place the thermostat back on the subbase.
You can find it on the wall beside the unit or at the condenser. The isolation switch looks like an ordinary light switch with a knob. Once you locate it, turn the knob to the off position and leave it for at least 30 minutes up to an hour. This will allow the electrically operated components in the AC to reset.
Locating the Reset Button
Remove the thermostat cover by either snapping it off or unscrewing it, depending on the model. Most modern thermostats will have a clearly marked reset button inside the panel. It's usually small and recessed, so you might need a pointed object like a paperclip to press it.
Try checking the circuit breaker box or replacing the batteries. Bad wiring: The thermostat may be unresponsive if the wiring has gone bad. Remove the cover and check inside for loose, detached, or corroded wires. If you spot any problems, contact an HVAC technician for assistance.
A malfunctioning thermostat has a harder time maintaining a setting, and may quickly shift temperature settings with no warning. If your central air has a difficult time maintaining the set temperature, even after lowering a setting for a test trial, it could be the thermostat.
When your thermostat is working correctly, you can keep it as cool or warm as you need. A bad thermostat can cause your AC to not cool or heat the room to the desired temperature. Air conditioning concerns are more apparent: Your thermostat is one of the best indicators of your air conditioning system's health.
Your AC might not cool properly due to thermostat issues, an undersized unit, or extremely high outdoor temps—so check those first. Keep an eye on airflow—replace clogged filters every 3 months, and make sure vents and ducts aren't blocked for efficient cooling.
Cooling a house from 80 to 72 degrees is a common goal for many, especially during the peak of summer. On average, this process takes roughly two and a half to three and a half hours.
If the temperature is set to 74°F but the thermometer shows 78°F, you will have to recalibrate the thermostat to account for this 4-degree deviation. Even with older AC units or furnaces, you might have to recalibrate your thermostat from time to time.
Yes, you should turn off your AC if it's not cooling. Continuing to run a malfunctioning AC can strain the compressor and other components, leading to more severe and costly repairs. If there's a refrigerant leak or airflow issue, running the AC can cause the evaporator coils to freeze, compounding the problem.