We also NEVER recommend using OxiClean or Mr. Clean Magic Eraser as a cleaner on any type of natural stone. OxiClean and Mr. Clean Magic Eraser have many beneficial uses but using it to clean your travertine is NOT one of them.
You may also use Oxyclean mixed 4 scoops to a gallon of hot water. Let soak for 15 minutes and then scrub with a nylon bristle brush, then rinse. Caulking - Scrape off excess and scrub with a poultice of denatured alcohol. Rinse with hot water and detergent.
Acidic commercial cleaners and those containing harsh chemicals, like bleach, can damage and dull natural stone surfaces.
If your deck is made from concrete, pavers travertine, brick, stamped concrete or composite decking, you can clean and refresh it for summer using OxiClean™ Versatile Stain Remover.
OXICLEAN: The concrete cleaner solution for your toughest cleaning jobs. We provide a superior outdoor cleaning product that is safe for your vinyl, aluminum, roof, car, wood, brick, carpet, and other common material needs.
Another relatively safe and environmentally friendly solution for cleaning concrete is an oxygen bleach product, such as OxiClean. Just be sure to wear rubber gloves, as bleach products can be tough on skin. Sprinkle the powerful solution over the entire patio and scrub it with an ordinary push broom.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone.
Keep It Simple to Clean Natural Stone
You can use any type of mild soap detergent, such as dish or hand soap, and mix it with a little water. Wet the stone first, and then use a bristle brush and soap solution to wipe the stone clean. The last step is to make sure you rinse thoroughly.
Apply a paste of baking soda and water over the stain and leave it for 24 hours. Gently scrub the area and rinse it with plain water. Stains on Sandstone pavers, Travertine floor tiles, and Marble floors can easily be cleaned with a baking soda solution.
Pour or spray 3% to 4% hydrogen peroxide over the area with rust stains. Use a nylon brush or a cleaning pad safe to use on natural stones to agitate the solution. Let it sit for at least 24 hours, and then rinse afterward.
It's essential to only use cleaners which are appropriate for natural stone surfaces. This means avoiding using vinegar. Stones like limestone, marble, or travertine will react to vinegar because it's an acidic cleaner with harsh effects.
This outdoor cleaner is perfect for vinyl, aluminum siding, roofing, gutters, concrete driveways, wood, and other common materials. Remove stubborn stains and get sparkling clean surfaces with OxiClean Outdoor Multi Purpose Concentrated Cleaner.
Vinegar can be applied directly or in a 1:1 ratio with water. In the case of bicarbonate soda, dissolve 1 to 5 tablespoons in 10 litres of water, depending on the degree of soiling. The mixture must now soak in for 15 to 20 minutes. The patio is then cleaned with a scrubber and finally rinsed with clean water.
White vinegar can be useful for removing mold or fungus. Wearing gloves, pour it over the area, scrub well, then rinse. A quarter cup of bleach mixed with two gallons of water can also be used instead of vinegar, says Rocks Stones & Pebbles.
The simplest answer is no, it is best to avoid bleach when cleaning any type of natural stone. Many home cleaning products, particularly bleach and vinegar, are too harsh or acidic to be on natural stone. These cleaners strip down the stone and leave it in a weak, damaged state.
To maintain the luster and shine of your natural stone, use a stone-safe polish about once a week. To polish stone, simply spray the polish directly onto the surface, then buff the surface until it's dry with a lint-free cloth or dry paper towel.
Rubbing alcohol is a natural bactericide and can also kill fungus and viruses. It has no ill effects on your granite or the seal on your granite so it's an ideal way to keep countertops clean.
OxiClean™ Bleach Mold & Mildew Bathroom Stain Remover makes it easier to clean mold stains because it has bleach, which helps to remove mold and mildew stains on non-porous bathroom surfaces such as tiles, sinks and tubs.
OxiClean™ is a Versatile Stain Remover in a powder form that is activated when added to water (warm or hot water work best). Oxygen is released and targets the stains, rather than the fabric, removing many tough stains on water-washable clothing, carpet, upholstery, and hard surfaces both inside and outside the home.
Although it's possible to scatter the OxiClean powder on the wet concrete and then scrub with a stiff broom, you'll probably get a more uniform result by mixing the powder with water first. Use four scoops of powder per gallon of water. The powder mixes best into warm-to-hot water.