To take your Honeywell thermostat off a hold, simply press the Run, Run Schedule, Use Schedule, or Cancel button on the home screen. This will clear the hold and resume your regular programming.
To turn off the "Hold" on your thermostat and return to your regular temperature program, press either the Run, Run Schedule, or Cancel button. For models without a dedicated button, manually adjust the temperature using the arrows, then tap Run or Use Schedule on the screen.
To set a hold until the next scheduled period on your Honeywell thermostat, simply press the up or down arrows to adjust the temperature to your desired level. The thermostat will automatically lock in that temperature and revert to your regular program when the next scheduled time period begins.
Hold the reset button (if present): Some non-programmable Honeywell Thermostats have a dedicated reset button, usually located near the display or behind a cover panel. If your model has one, hold it down for about 5-10 seconds while the power is off.
To change the mode on most Honeywell thermostats (such as Heat, Cool, Auto, or Off), locate the MODE button on the face of the thermostat. Press it to cycle through the available options. Stop pressing when your desired mode is displayed, and the thermostat will activate it.
To get a Honeywell thermostat out of recovery mode, adjust the temperature or schedule settings. Simply increase or decrease the set temperature, or switch your thermostat to “hold” to override the schedule.
To get your Honeywell thermostat off "Hold," press the Run, Run Schedule, or Cancel button on the main screen. If your model relies on menus, tap Menu, select the Hold option, and choose Cancel.
Comfort, Energy, and Balance
Your thermostat's programmed schedule is designed to save energy by reducing heating or cooling when you don't need it—like while you're asleep or away. Using Hold long-term can eliminate those savings, leading to higher utility bills.
Temporary hold lasts until the next scheduled program period.
Depending on your model, the "Hold" button is either a dedicated physical button (usually labeled Hold on the right side of the faceplate) or a dynamic button on the touchscreen located just below the temperature display.
Thermostat Stuck in Hold Mode: Causes and Fixes
Check the wiring connections at the thermostat and HVAC control board for loose or corroded terminals. Verify the fan setting isn't set to 'Auto' if you want continuous operation. Inspect the fan relay for proper function; a faulty relay can prevent the fan from running.
A user can cancel a temporary Hold at any time by manually adjusting the thermostat's set temperature. This will override the hold that is set. Please note that many Honeywell Thermostats will allow you to increase or decrease the temperature set during a Hold.
To turn off the schedule on your Honeywell thermostat, the quickest method is to use the Hold feature to lock in a specific temperature indefinitely. For a permanent schedule disable, use the main menu to turn off the program or switch the thermostat type to non-programmable.
“Hold” is a function on programmable thermostats. A temporary hold on the programmed schedule means you can raise or lower the temperature and hold it until the next scheduled period, at which point the thermostat will resume its programmed schedule. The thermostat will display the word Hold and may show a timer.
To cancel a hold on a thermostat and return it to its programmed schedule, look for a "Run Schedule," "Resume," "Cancel," or "Run" button on the screen and press it. If you do not see these buttons, press the physical "Hold" button and select "Cancel Hold" from the menu.
Energy Efficiency Considerations
While the "Hold" function offers convenience and control, it's essential to consider its impact on energy consumption. Leaving the thermostat on "Hold" for an extended period, especially at extreme temperatures, can result in higher energy bills.
If your Honeywell thermostat doesn't have a physical "Hold" button, it likely uses a software menu or context-sensitive buttons. You can usually engage and cancel holds by adjusting the temperature manually or navigating the main menu.
To turn off the screen lock on a Honeywell thermostat, you must first unlock the device using its passcode, then navigate to the settings menu to disable the lock feature.
To fix a thermostat that isn’t holding or reaching your desired temperature, immediately check for a dirty air filter, blocked or closed room vents, and accidental schedule overrides. Make sure the thermostat is set to "Hold" or "Permanent Hold" rather than "Run Schedule".
To quickly reset your Honeywell thermostat, first determine if you want to fix a frozen screen (Restart) or erase all settings (Factory Reset). The steps vary slightly depending on your device:
A thermostat stays in "recovery mode" for 1 to 2 hours before your scheduled temperature change. It usually turns off automatically the moment your home reaches the target temperature.
To override a Honeywell thermostat, simply press the arrow buttons to set your desired temperature. To hold this temperature indefinitely rather than returning to a programmed schedule, press the Hold button. To resume your schedule later, just press Run.