Cleaning PVC plastic, found often as siding on houses, is best done with a mixture of bleach and dish soap that is scrubbed onto the surface with a sponge or mop. Clean plastic house siding once a year with information from a professional house cleaner in this free video on housekeeping.
Acetone works great for cleaning PVC but it also removes the marking on the pipe. It cleans just as good as PVC primer without removing the gloss and softening the pipe.
Hydrogen Peroxide
It is recommend you mix one part water and one part hydrogen peroxide to begin with and wipe and cover the affect area with the mix. Leave the solution work for 10 minutes before wiping clean with another white cloth that is just dampened with water.
To clean mould and black mould off uPVC window frames, you should use a hot water and soap solution and a soft cloth. If this doesn't work, you can also try vinegar. DON'T ever be tempted to use bleach or white spirits as uPVC as it can turn white uPVC brown.
Mix 250 millilitres of white vinegar with one litre of warm water. Use a spray bottle to apply the spray to the frames. Leave the vinegar on the surface for about 10 minutes. Wipe down the PVC with a soft cloth and allow the window to dry before closing.
Answer: Yes, PVC Cleaner and Restorer is specifically formulated to tackle stubborn stains on PVC surfaces. For tough stains, you may need to apply the cleaner, let it sit for a few moments, and then scrub gently with a soft brush or sponge.
PVC Sunburn? - UV Exposure
In some cases it causes it to discolor. That means the normally white PVC will start to turn a brownish color.
Sprinkle baking soda on cups coated with vinegar.
Alternately, apply a dusting of baking soda to a damp sponge and scrub the cups. The baking soda and vinegar will react, dissolving the film that causes the plastic to appear foggy.
If necessary, additional grease can be added to the joint before tightening it completely. Other products that might seem like they could work are olive oil, Vaseline, and WD-40. Do not use these under any circumstances. They are very thin and won't stay in place.
The Oatey 16 fl. oz. Clear Cleaner is a general-purpose cleaner designed for use on ABS, CPVC and PVC pipes. It has a low VOC.
Regularly clean the PVC liner.
Removing dirt, debris, algae, and other contaminants helps to ensure the durability of the liner. The best way to clean the PVC liner is by using a soft brush or cloth to lightly scrub the surface.
Things to Avoid When Cleaning uPVC Windows
To clean, don't use cream cleaners, bleach, white spirits, WD-40, scouring pads, nail varnish remover, or methylated spirits. These can scratch the windows or remove their glossy finish.
You can simply clean this plastic with a clean, soft cloth. For regular light cleaning activities such as dusting, use a microfibre cloth, for more thorough cleaning you can use a general cleaning product such as Glassex. However, be careful when spraying the surface.
White vinegar: White vinegar is an effective and ecological alternative to chemical cleaning solutions. Mix a few spoons with a bucket of warm water and clean the yellowed uPVC surface.
Use a bucket of warm soapy water (washing up liquid is ideal for this task) and a soft cloth or sponge to wipe down the dirty window. Do not use scouring pads or cream cleaners as they can scratch the uPVC and remove its 'glossy' finish.
The answer is that vinegar will not harm your pipes if used in small doses as recommended in many of the recipes that you find online. No matter what your pipes are made of, pex, pvc, copper, etc.
Alcohol solutions (isopropyl alcohol / purified water) or wipes with at least 70% alcohol are effective for sani- tation of most hard surfaces. First clean the surface with soap and water. Then apply the alcohol solution and let sit on the surface for at least 30 seconds to disinfect. Wipe dry with clean cloth.
Safe and Gentle: Enzyme-based drain cleaners use natural bacteria and enzymes to break down organic matter, such as hair, grease, and food particles, without harming plastic pipes. Examples: Products like Green Gobbler or Bio-Clean are popular enzyme-based options.
Polishing PVC to Remove Scratches
For finer scratches, you can use more complex compounds such as Novus™ or 3M™ products; however, toothpaste or a paste made from baking soda and water will remove most scratch marks.
If you have a clogged PVC pipe or want to prevent your pipes from clogging, it may be time to clean the inside of your pipes. Fortunately, with a plunger or snake and some dish soap or enzyme / bacterial drain cleaner, you can easily clean most PVC type piping on your own.