The easiest way is by using a solution made from one part bleach and two parts water. Mix the solution in a bucket and immerse your discolored floor tiles. Using a soft-bristled brush, scrub lightly, then rinse thoroughly.
Mix together a paste of baking soda and vinegar in a 1:1 ratio—2 tablespoons of each should do the trick. Coat the inside of your pan with the baking soda-vinegar paste, then use your sponge to gently scrub the entire surface. If the stain is still there, proceed to the next step.
In an empty spray bottle, mix one-part peroxide with two parts baking soda. Spray the solution on the stained grout, and scrub the area with a soft brush. Be sure to use a soft brush on porous or marble tile so it won't scratch the surface. You can also make a paste of two parts baking soda mixed with one part water.
White vinegar is an acidic solution that can etch or corrode some tiles, particularly those made from natural stone or unglazed ceramic. The acid in white vinegar can also weaken and deteriorate certain grouts over time, particularly if the grout is already damaged or in poor condition.
Apply cream of tartar and vinegar.
Then, spoon some of the mixture onto the stains on your ceramic. Let this sit for about 10 minutes, and wipe clean with a sponge. This method will also work if you substitute hydrogen peroxide for the vinegar.
The easiest way is by using a solution made from one part bleach and two parts water. Mix the solution in a bucket and immerse your discolored floor tiles. Using a soft-bristled brush, scrub lightly, then rinse thoroughly.
Baking soda and vinegar is the most effective natural solution for cleaning stubborn grime on old bathroom tiles. Mix together to form a paste and apply to the tiles with a non-abrasive brush or sponge, using a gentle scrubbing motion.
Efflorescence is a white deposit (usually calcium carbonate) that develops on the surface of grout and/or tiles as they dry out. It happens when soluble, naturally occurring mineral salts contained in Portland cement, or materials used in conjunction with it, rise to the surface.
Directions: Pour 2 to 3 tablespoons of vinegar onto the affected area. Allow the vinegar to sit on the surface for about 3 to 5 minutes. Rub the surface with a clean, soft cloth to remove the stain.
To begin, combine 4 tablespoons of baking soda, white vinegar, and ammonia with 1 ½ quarts of warm water. Spray this solution onto the stained grout and allow to sit for about 15-20 minutes. Wipe clean and repeat as necessary. This solution can be used on both light and dark colored grouts.
It's simple. If you use baking soda on your ceramic hob alone, you will scratch it. That being said, if you use it in combination with vinegar as we showed you in our guide, your ceramic hob will be absolutely fine and scratch-free.
Stains develop when moisture seeps through tiny cracks in the glaze, commonly referred to as crazing, crackles, or pinholes. These cracks, often invisible to the naked eye, allow moisture to combine with organic matter such as tea, coffee, oil, fat, food particles, or dust.
You can also make your own cleaner by mixing lemon juice or vinegar with hot water. Apply it to the floor and then buff dry with a clean cloth. Use a towel on the floor, and push it around with your foot to make it easier. For a deeper clean, scrub your tile floor with an electric floor washer or polisher-scrubber.
Paint Over the Tiles
You can make them any color you want from calming blue to classic white. Yellow, orange, and green are also great hues for invigorating and engaging aesthetics. Clean and sand the tile, apply a layer or two of primer, and let it dry. Add an epoxy or two-process paint layer with a roller.
If you are having trouble activating your Tile, try pressing the button on the Tile firmly for 1 second. If the Tile does not play a tune, press the button on the Tile twice in rapid succession. If the Tile still doesn't play a tune, contact us so we can provide further troubleshooting.
If the discoloration is caused by dirt or grime, cleaning the tiles with a pH-neutral cleaner and a soft-bristled brush may be enough to restore their original color. Remove efflorescence: If the discoloration is caused by efflorescence, you can remove it with an acidic cleaner or a solution of water and vinegar.
Tile Refinishing – The Best Way to Change Tile Color without Replacing It. Tile refinishing is the fastest, easiest, and most affordable way to change tile color without replacing it. A new coating goes over the grout and tile, creating a fresh glaze that instantly revitalizes the room.
Ceramic tile refinishing can be used on most any tile surface, but you should consider how the surface is going to be used and how much wear and tear it will receive. Ceramic tile in a shower or surrounding a bathtub that will be subject to moisture can definitely be refinished.
Vinegar is often used in ceramic slurries to change the viscosity (thicken it). While there are more effective flocculants (e.g. calcium chloride, epsom salts), vinegar is popular among potters simply because it is so available. The effect is to gel the slurry.
Wiping the tiles with a premade solution of 10% bleach and 90% water should remove most of the mold (source). For particularly tough stains, try mixing a solution of 25% bleach and 75% baking soda in a cup. Always test the solution on a small section of your ceramic tile before you tackle the mold.
To clean tiling or a ceramic floor, use almost pure white vinegar (mix three quarters vinegar and one-quarter warm water). Soak the mop in the bucket and move it along the floor without wringing it out. Then, rinse with water before drying the tile or ceramic floor with a second clean and dry mop.