Use a dehumidifier placed at the highest setting possible to dry the floors. Place it in the center of the room and leave it on for at least 24 hours. Next, place fans around the room so the entire surface receives the blowing air.
After showering, squeegee the walls of your shower so more of the water goes down the drain and less has to evaporate into the air. If the bathroom has a window, leave it open for a while after a shower. Hang wet towels in another room, and if you can, run a fan that blows drier air into the bathroom.
Moisture is well absorbed by black tea, baking soda and silica gel. These are commonly available products which can be poured into a moisture-permeable fabric pouch and then placed in the bathroom. To give it some fragrance, add in dry flowers, ground coffee or orange slices.
This DampRid product will reduce damp and musty smells as well as prevent mold that grows in moist and humid conditions. The crystals will work better in a smaller closed off area with restricted airflow, like bathrooms, basements, closets, laundry rooms, RVs, etc.
Try to take cooler showers when you can, and keep the door open to the bathroom when you can to increase the air circulation. Another effective way to dehumidify your home naturally is by turning on the bathroom's exhaust fan every time you take a shower.
Use dehumidifiers and air conditioners, especially in hot, humid climates, to reduce moisture in the air, but be sure that the appliances themselves don't become sources of biological pollutants. Raise the temperature of cold surfaces where moisture condenses. Use insulation or storm windows.
This is typically caused by warm, humid air coming into contact with a cold surface, creating small droplets of water on the surface. In the bathroom, the air holds a lot of moisture when someone uses the shower or bath, while the room also contains a lot of cold surfaces such as tiles and mirrors.
Does DampRid work? Yes. CHOICE household products expert Chris Barnes says, "We put a DampRid container in a sealed test chamber about the size of a closet with 80% humidity and a fan for air movement. Within three days, DampRid reduced humidity to 43% and collected almost half a cup of water."
Invest in a good spin mop- A spin mop is essentially designed to clean floors with less usage of water. The spinning function of the mop removes excess water and dirt before you can use it to dry up your bathroom tiles. It is better to turn on the bathroom fan or vent after mopping to ensure quick and thorough drying.
Baking Soda: Baking soda is cheap and easy to find. It's great for small areas and helps neutralize odors while absorbing moisture. Use it in closets or cabinets.
Apply baking soda
The longer you let the soda sit, the better. At an absolute minimum it should be left for 30 minutes. By doing this, the baking soda will absorb the moisture and odours embedded in the mattress.
For very damp bathrooms, or ones without a vent fan the EDV-1100 is a great option, small enough to sit on the back of the toilet tank or on the counter. Using Peltier technology, it actively can remove up to 8 oz. of moisture per day at 86°F and 80% RH, in turn, this helps dry your towels and rugs faster post bathing.
To remove the standing water from your home, you need a device that will soak up the water and put it elsewhere. This is what a sump pump does. There are two types: pedestal sump pumps and submersible sump pumps.
DampRid crystals work immediately to absorb excess moisture from the air. The crystals harden and form a solid mass. Then they begin to dissolve and liquid will begin to drip into the bottom chamber. It may take a few days before liquid begins to drip.
Rock Salt. The most popular DIY dehumidifier is the one that works the best—rock salt. Rock salt naturally absorbs moisture out of the air, making it a great choice to use as a dehumidifier.