For older stains, using an industrial-strength cleaner like CLR should do the trick. Another less conventional strategy you can try is removing the stains with Coca-Cola. To do this, simply pour a full can of Coke into the toilet and let it sit in the bowl overnight. Then flush the toilet the next day.
Use vinegar and baking soda to clean toilet bowl stains. This mix creates a reaction that lifts stains well. It's also good for the planet and safe for your family.
See if you can do a search on a product called CLR. This product which is an acronym for calcium, lime, and rust can remove almost any stain from a toilet bowl with incredible ease.
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush. What's good for those caked-on pots and pans after cooking dinner is also good for removing a brown stain on the bottom of the toilet bowl.
Let the CLR sit for 2 minutes.
CLR is corrosive. Avoid contact with wood, clothing, wallpaper and carpeting. Some laminated surfaces (counter tops) are coated with a synthetic surface which may be affected by rust removers; clean spills immediately.
White vinegar
The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.
Over time, pipes and plumbing fixtures can corrode, causing rust to form inside them. As water flows through these rusty pipes and fixtures, it can pick up small rust particles, discoloring the water. When the water reaches your toilet bowl, that strange brown hue appears.
To remove black stains from a toilet bowl, start by soaking up the water at the bottom of the bowl using a cloth. Prepare a vinegar and borax or baking soda paste and apply it all over the stains. Wait for about 30 minutes and scrub off the stains using a toilet brush.
Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
So, which one should you go for? It really depends on what kind of cleaning you need to do. If you're dealing with really tough, built-up mineral deposits, especially in your bathroom or kitchen, CLR might be the way to go. It's strong enough to handle stains that vinegar might struggle with.
Use on most bathroom surfaces including: porcelain, ceramic tile, shower doors, sinks, bathtubs, white grout and caulk, toilet bowls, and fiberglass. Will not remove rust. Do not use on vinyl, natural stones, mirrors, plastic laminates, wood, fabrics, painted, coated or sealed surfaces, colored grout or wall coverings.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
Mix equal parts of lemon juice and borax to form a paste. Apply the paste to the affected areas and let it sit for at least two hours. Use a toilet brush to scrub the rust stains away, and finally, flush the toilet. Repeat the process as necessary until the rust is completely gone.
The following tips can help remove brown deposits: Get started with cleaning vinegar. Pour it on the spot where the tarnish occurs and leave for a few hours. Afterwards, rinse again with water.
Bleach only masks the problem—it doesn't get rid of it for good. Instead, try citric acid and a toilet pumice stone for a permanent solution. 🧽✨ Citric acid breaks down those mineral stains, and the pumice stone gently scrubs them away. Say goodbye to those marks for good!
Who knew that dishwasher tablets could help keep your toilet sparkling clean? Just drop a dishwasher tablet in toilet bowl and let it sit for 10-15 minutes. Then, use a toilet brush to scrub the bowl and flush it. The tablet will help to break down any stains or buildup in the bowl, leaving it fresh and clean.
When it comes to being good for the environment, CLR has a slight advantage. It's biodegradable and part of the EPA's Safer Choice Program, which recognizes products with safer ingredients. Lime Away works well, but it doesn't have the same environmental certifications.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
“Pour a half cup of bicarbonate of soda into and around the bowl and let it sit for at least 15 minutes.” “Then, apply white vinegar over the baking soda. This produces a fizzing reaction that activates the acid and can break down the most stubborn build-ups of limescale.
Another thing to keep in mind is that CLR doesn't get more effective the longer it sits. In fact, if you leave it in your toilet overnight, you may actually be wasting it. CLR works best in the first few minutes. Leaving it in the bowl for hours won't give you better results and might actually make it less effective.