You can clean polished wood or non-porous hardwood floors with
For a quick and convenient solution, use Clorox® Scentiva® Disinfecting Wet Mopping Cloths1 to disinfect hardwood floors. They kill 99.9% of germs2 and are bleach-free and safe to use on sealed or finished hardwood floors.
TIP: For disinfection, mix 1 cup of Pine-Sol® Original per ½ gallon of water. Step 2 Dampen a soft sponge, cloth or mop with the mixture to wipe down the surface. Step 3 Scrub stubborn spots with a gentle scrub brush or mop. Use Pine-Sol® full-strength if needed, following up with a water rinse.
To disinfect hardwood floors without vinegar, use a commercially available wood floor disinfectant or a solution of mild soap and water. You can also use hydrogen peroxide diluted with water for a disinfecting effect. Always follow up by drying the floor to prevent moisture damage. For more, check out my Quora Profile.
Deep Cleaning for Hard-Surface Floors
The antibacterial formula cleans and disinfects with the power of hydrogen peroxide.
Don't use vinegar or baking soda.
They actually damage and dull the polyurethane, which can irreparably ruin them. When it comes to DIY anything and your wood floors, just say no.
Q: Can Pine Sol be safely used on hardwood floors, including engineered hardwood? A: While Pine Sol is a popular household cleaner, using it on hardwood floors, especially engineered hardwood, may not be recommended as it can leave a residue that could potentially damage the finish over time.
For a cleaning solution, you can mix a few drops of dish soap or castile soap with warm water in a bucket. Avoid using harsh detergents that will damage the floor's wood and dull its finish. You should also not use products like vinyl floor cleaner or tile cleaner.
The ideal mixture typically involves a mild solution of diluted vinegar with just a few drops of Dawn. This blend ensures that the cleaning power is strong enough to clean the floors without leaving any harmful residues or damaging the wood.
According to the official Clorox website, their Clorox Scentiva Disinfecting Wet Mopping Cloths are safe to use on hardwood floors. This is mainly because the wipes don't contain any bleach, which can damage hardwood by deteriorating the wood, eating away at the timber, and causing it to weaken over time.
A diluted bleach mixture, commercial disinfectant and isopropyl alcohol are all good choices. A vinegar solution can work quite well to clean floors, but it is a weak disinfectant. Depending on the type of floor, your approach will vary.
Fortunately, there's a simple and effective solution that you probably already have in your pantry: vinegar. Vinegar is a natural and effective cleaning solution for wood furniture, as it can remove bacteria, dirt, and grime without harming the wood.
This cleaner is a versatile disinfectant that works on a wide range of hard, non-porous surfaces. From kitchen counters and door handles to hardwood floors and light switches to bathroom surfaces like sinks, tubs and tile. Lysol multi-surface cleaner is versatile enough to disinfect even when diluted.
If it is furniture - use Murphy's oil soap, but not on wood floors! Use only what the wood floor manufacturer recommends. If it's raw wood floors and finished in the home you can use a very small amount (2 Tablespoons) to a gallon of water.
A solution of warm water, vinegar and about five drops of dish soap can clean and disinfect the furniture if soiled. Remove dust and protect using a soft cloth and non-abrasive furniture polish. Avoid polish build-up by applying furniture polish sparingly to a soft cloth and gently wiping wood surfaces.
Mr. Clean's 2X Concentrated* All Purpose Cleaner muscles through 100% of dirt and grease for powerful, multi surface cleaning. This floor cleaner for mopping is great for cleaning linoleum, tile & hardwood floors**.
And a quick Google search reveals that a lot of people still recommend using it. But vinegar should not be used as a hardwood floor cleaner because its acidity can lead to etching in the wood's surface. Avoid ammonia – Ammonia will discolor, deteriorate, and dull the finish.
Is wet mopping hardwood floors ok? It is never recommended to wet mop a hardwood floor. No matter what you've heard, read, or watched, true experts are not trying to sell you something. Easily maintain flooring with a safe for hardwood cleaner and microfiber mop.
You can clean polished wood or non-porous hardwood floors with Lysol® . If you're just looking to – you can use Lysol® All-Purpose Cleaner to clean and disinfect your floor surface without causing damage to the wood.
Do not use Swiffer wet cloths on unfinished, oiled or waxed wooden floors, non-sealed tiles or carpets. If you have any questions about cleaning your particular floor, contact the manufacturer of the floor or test the cleaner in a hidden area of the floor.
The best solution I've found for me (100+ year old) hardwood floors is scrub with a clean broom with water and Dawn. Not enough water to puddle, just to suds. Then mop up soap with clean water.
If you must use pine sol, I'd definitely follow with a clean water washing to remove residue especially for safety of animals and children.
Bona's PowerPlus Antibacterial Hard-Surface Floor Cleaner cleans and disinfects with the power of hydrogen peroxide. This ready to use antibacterial cleaner is uniquely formulated to powerfully clean and effortlessly remove stubborn stains while killing 99.9% of household germs.