Algaecide should be added to your pool water on a weekly basis. Preventing algae is the key to fun in your pool. Algaecides act as a backup to your normal sanitization program and prevent algae from starting and growing in the pool. Algaecide should be added after every shock treatment.
The presence of too much algaecide can lead to a foamy pool water. Small bubbles will begin to be produced as the water is pushed through the return jet and back into the pool. Do not confuse these bubbles and foam with another common problem, which is air in your pool lines.
Algaecide should be used after each shock treatment, so it has a better chance to support your chlorine as it works its magic. Be sure to shock your pool first, then when the chlorine levels of your pool return to normal, add the correct amount of algaecide to several places around your pool while your pump is running.
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
Let the water circulate for at least two hours.
Circulate the water for about 2 hours to ensure the flocculant is fully mixed in, then shut off your pump and let it sit overnight. During this time, the chemical will start to bind the particles together and settle them to the bottom of the pool.
If you add algaecide, keep in mind that some algaecide contains copper, which can actually make a pool cloudy. If the cloudiness persists 24 hours after shocking, then it's possible that you used a poor-quality chlorine shock.
There are a few different types of algaecides that contain various chemicals to suppress and fight off algae. Many of them include copper or copper sulfate. It's this copper that oxidizes in the water. And when copper oxidizes it turns a green color causing your pool to look green.
Add a dose of algaecide, bring your chlorine level high by shocking, and run the filter continuously until the problem clears. The next day you should vacuum up the dead algae and backwash your filter. Algae thrives in hot weather and in pools with low or no chlorine.
GETTING RID OF ALGAE
Liquid Algaecide is a strong algae depressant used for the prevention of algae growth and the maintenance of sparkling water in pools. Algae growth is the main cause of “off” colours in your swimming pool water.
Don't Bother Unless You Absolutely Have To
Algae happens, but you usually don't need an algaecide to get rid of it. Keeping your water chemistry clean and well balanced will prevent growth in most cases, while superchlorination with pool shock can handle minor and common infestations.
pH Balance and Chlorine
Algaecides do not directly affect the pH balance in your pool, but too much algae will raise the pH level. By eliminating algae, the algaecide helps return pH levels to normal. Algaecide also works together with chlorine, helping the chlorine to be more effective against algae and bacteria.
The best time to introduce an algaecide , which functions best as a preventative, is after you've shocked the pool and the chlorine level has fallen below 5 parts per million.
The algaecide in the kit can cause some foam if there is no algae in the pool to destroy – it lingers around with nothing to kill. Spring time algaecides use surfactants to work and these molecules can react with agitation to cause froth.
Add Algaecide After Shocking
Wait for the pH to fall to a safe level for swimming (3 ppm or below) and then add a product such as Pool Time Algicide + Clarifier in the amount recommended in the product instructions. Pour this incrementally into the water as you walk around the pool.
You can get rid of algae quickly by vacuuming and brushing your pool, balancing your pool's water chemistry, and then shocking and filtering your pool water. Just be thorough as you clean your pool surfaces. If you leave behind even a small number of algae spores, it won't be long before they regrow and bloom again.
The HTH Ultimate Algae Guard is the one that is added every 90 days, it is a copper based algaecide.
Results in 24 Hours
Non-foaming formula works fast to kill pool algae.
If the pH or alkalinity of your pool is off, that may be the culprit. Debris, phosphates, and pollen also can cause yellow algae, and you're more likely to get algae in warmer climates or in areas with environmental and atmospheric changes.
Pool water turns green because of algae in the water. Algae can grow rapidly, particularly when it's warm like Summer, which is why it can surprise you overnight. This generally comes down to an imbalance or lack of chlorine in the water.
In general, when it's algae the water is usually dull or cloudy in addition to green. If the water is a clear green, it's usually metals. If you add a hypochlorite source of chlorine to the water or raise the pH and it turns green, that's usually metals.
What's important for you to know: You shouldn't swim in a pool that's green until you test the chemical levels, like the officials in Rio did before the diving event began. It's the balance of things like chlorine, pH, and alkalinity in a pool that keeps it sterilized.
After the hose fills with water, backwash your sand filter for 2 - 3 minutes, or until water runs clear. Shut off the pump motor and push the T-handle back down into locked position. Turn your pump back on and note the lower pressure.
Baking Soda and Green, Blue, or Yellow Algae
You'll need to use an algaecide to kill the algae and superchlorinate your pool to clear the water. After this treatment, test your pH and alkalinity and add baking soda to raise alkalinity to at least 100 ppm and pH to between 7.2 and 7.8.