Safety first: always turn off the power to the AC unit at the circuit breaker before you start cleaning. This prevents any risk of electrical shock and ensures the unit won't turn on while you're working on it. With the power off, remove any large debris by hand or with a garden tool.
Turn off the power to your air conditioner. Locate the evaporator coils, which are typically found inside the indoor unit or air handler. Carefully remove the access panel or cover to expose the coils. Use a vacuum cleaner with a soft brush attachment to remove dust and debris from the coils gently.
Cut the Power. Start by turning off your air conditioning unit. Cleaning a standard HVAC system while it's running is dangerous—both for you and your air conditioner. There's usually a shut-off box somewhere near the condenser unit (the portion of the AC system located outside your home).
Depending on the system, an optimal time of 3 minutes is required before switching the system on. If the system is turned on without waiting for at least 3 minutes, the system can start with a pressure load. This pressure load prevents the system from cooling properly, which could affect the system in the long run.
After all, one thing we were all taught when we were very young is that water and electrical appliances don't mix. So how do you clean your outside AC unit? The good news is that you absolutely can spray water on your air conditioner if it needs a cleaning, and nothing bad will happen.
Get Your AC Coils Cleaned
Get your coils cleaned annually. If you live in an area where your AC unit is exposed to excessive amounts of dirt, dust, debris, or moisture, it is best to regularly clean your coils every three months or so. Every AC unit and environment is different.
Giving your air conditioner a 15 to 30-minute break every 2 to 3 hours of uninterrupted functioning can be beneficial. The system can cool down, and its parts can rest during this time, reducing the stress on the unit.
Don't run your AC 24 hours a day
In a published analysis that was not peer-reviewed, Pigott and other researchers found that less energy was used across the three types of air conditioners studied when cooling was shut off for an eight-hour period, compared to running the systems all day at 76 degrees Fahrenheit.
Wear and Tear on the System
Turning your air conditioner completely off and then on forces the system to work harder. Each time the air conditioner starts, it experiences a surge of power, which can strain the components. Over time, this can lead to a breakdown or the need for premature repairs.
When to use the air conditioner after cleaning? Waiting for at least 24 hours is recommended after cleaning an air conditioner. Your appliance will dry out completely during this period. In the meantime, there are more steps you can take to speed up the drying process.
It's no problem to hose off an AC unit or heat pump. It's one safe way, or part of a good step-by-step process, to clean the units and you should do it once or twice a year.
If you neglect to clean your air con filters every three months, your system's efficiency can drop. It has to run longer and work harder to circulate air and maintain the desired temperature, which can lead to wear and tear on its components much faster than if it were running under optimal conditions.
Wait at least 30 to 60 minutes for the unit to dry. Water and dampness can interfere with the unit's operation and cause electrical components to short circuit.
A product like Air Conditioning Coil Cleaner removes counterproductive dirt and oxidation on air conditioning coils. When fins and coils are clean, air circulates more fully and AC systems operate and cool more efficiently, reducing the unit's power consumption.
Running the “auto” function of your air conditioner all day and night isn't the best idea for any home. There are a few reasons you don't want to run your AC system all the time: System stress: Your air conditioner unit needs time to take a break.
Best AC Temperature Settings While You Are Home
As you consider the most comfortable room temperature for your lifestyle and family, keep in mind that for each degree that you set your thermostat above 72 degrees, you can save up to 3% on your energy bill.
In general, wall and window air conditioning units with smaller capacities can typically run for up to eight hours at a time before they need to rest. Larger wall and window units have a longer running time of around 10 to 12 hours, depending on their cooling power.
Allow a 3-minute break after turning the AC on or off and reset the circuit breaker 24 hours prior to first use to prevent damage and improve efficiency. Perform a pre-start inspection by cleaning the unit, checking filters and coils, and starting the AC in fan mode before cooling to ensure it runs smoothly.
Is your central air conditioner is running constantly? This leads to a big energy bill and can even damage your cooling system!
The short answer is, yes, HVAC overuse is possible and can occur. Running your AC around the clock is going to quickly increase your energy costs and your unit may also experience plenty of damage. Although it may be hot where you live all day long, you need to give your unit a rest so you can avoid it overheating.
Modern air conditioners can last between 15-20 years, and older air conditioners last around 10-12 years. The health and efficiency of your A/C depends on a number of factors, including whether or not you properly maintained the unit throughout its lifetime.
One of the ways is to make sure the air filter is clean. If you find it clogged with debris, clean it with a brush. A popular cause behind an AC that is not cooling is the deficiency of refrigerant or Freon. When refrigerant circulates together with the air, your room will be filled with cool air.