Most of the time tile will last about 20 years before the entire pool will need to be retiled. In between these times there are some simple repairs that you can do in order to reaffix any tiles that have fallen off. If a tile is loose, you are going to want to take a small flathead screwdriver or a chisel to remove it.
Pool Tiling Costs
Average labor rates fall between $4 and $32 per square foot or $30 to $120 per hour. To install replacement tile, the price ranges from $2,500 to $5,000, although the final cost depends on materials used, pool size, and overall labor.
Four main reasons suggest you need to replace your swimming pool tiles with new ones. These signs include: When the swimming pool tiles have white deposits that are difficult to get rid of. When swimming pool tiles start to fall off from the pool walls.
Now that your swimming pool has been prepped, you are ready for Step 3, where our highly skilled tile and masonry craftsman install your selected pool tile, coping, and other decorative features such as ledger stone. This process can take anywhere from 1 to 3 working days.
On average, tiling your pool should cost about $3,000. Glass tile is more expensive, usually costing about $500-$600 more for a pool. Cost is a very important aspect to consider when you're planning a pool remodeling project or are planning on building a brand new pool.
If All Else Fails… If you've tried everything outlined above and your tiles are still looking grimey, then it may be time to call a professional and have your tiles completely replaced. Then again, if you're a brave enough soul, you can make the attempt to re-tile your pool yourself!
Yes. The thinset and grout used to install the new tile will fall onto the pool surface. This is not easily brushed off. The pool will likely have to be pressure washed and possibly acid washed after the retile if you are not replastering the pool as well.
It varies depending on the type of pool, with plaster or cement pools needing to be resurfaced every 3-7 years while fiberglass pools can sometimes go as long as 15-30 years.
Like the rest of your pool surface, coping should last anywhere from 10-30 years. But this varies by material and climate.
Typically, putting tile along your waterline might cost $1,800 to $2,500 upfront, which is significantly lower than tiling your entire pool.
On Average, Replastering is Every 10 Years
So how often do you need to replaster a pool? The short answer is about every 10 years. However, it's important to consider the factors mentioned above, as they are typical signs that your pool needs to be replastered.
Waterline tiles are not necessary to have a swimming pool, but they are very beneficial to have installed when designing your pool.
Ceramic and Porcelain have traditionally been the 'go-to' choice in swimming pool tiles and are great for those with a strict budget. The tiles can be hand painted with intricate designs or formed into a mosaic.
Pool tiles come loose or fall off for a variety of reasons. Sometimes it's because of poor workmanship when the tiles were laid, but often there's another reason: Degradation of the cement bed behind the tiles can occur when water seeps in through cracks in the grouting or tile and seeps into the cement behind it.
TILE AND COPING
Tile and Coping usually take one or two days to install. But on complex projects, this vital stage could take longer.
The guidelines for commercial pool maintenance recommend that a commercial pool be replastered every ten years on average. However, there is no equivalent rule of thumb for residential pool replastering due to the large variation in personal use.
To answer your question, yes, you can re-plaster any pool. The original plaster though must be sound in regards to bonding to the original substrate. If there are hollow areas, bubbling, cracking or de-laminating, that must be removed until you find areas where the material properly bonded.
It is possible to place new tiles over the existing tile band, BUT there are several things to consider; The existing tile must be 100% adhered to the substrate.
For tiling, coping, and decking, the process is not as impacted by pool construction delays as the rest of the pool building process. However, the process requires dry dirt to complete, so if it rains, you have to wait a few days or weeks for the ground to dry, which applies to tiling and coping, as well.