Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
The most labour-intensive way of keeping your pool sanitised is to manually add chlorine. This involves testing your pool's water to figure out how much chlorine to use, and will need to be done every second day for the average backyard pool.
Most floating chlorinators can hold anywhere from two to eight weeks worth of chlorine, depending on conditions such as the season and your pool's size. An automatic feeder works in a similar way, allowing it to mix with the pool water slowly and deliberately. This type generally comes in a large bucket.
You'll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.
Statistically, a pool without chlorine is more likely to make you sick because of the possibility of being exposed to the things not contained or killed by chlorine. Remember, your skin is porous, so microscopic impurities can pass through. A pool sans chlorine is akin to a big puddle of murky water.
Even from a health standpoint, it is simply not safe to operate a pool without some added “chemicals” to combat bacteria and contaminants in the water. A pool without chemicals is the perfect breeding ground for bacteria, viruses, and parasites.
In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.
A pool should have a chlorine level between two and four parts per million (ppm). Make sure your above ground pool has enough by testing your water about every other day with chlorine test strips, such as these Aqua Chek Test Strips. Learn more about maintaining your pool's chemicals.
The procedure for adding granular chlorine is pretty much the same as adding calcium chloride or sodium bicarb to a pool. Measure the dry chemical, pre-dissolve in a bucket, and pour around the perimeter of the pool (never into the skimmer directly).
Chlorine is used to kill germs and bacteria in pool water, so it plays an important role in keeping the water clear. The pool's pH level, which measures how acidic or alkaline the water is, influences how effective the chlorine is in keeping the water clean.
Remove Chlorine by Evaporation
The surrounding environment dictates how long it takes for the chlorine to evaporate. Warmer air will cause the chlorine to evaporate more rapidly. If you decide to place the water in a jug that's left open in the refrigerator, the chlorine should evaporate completely within 24 hours.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
Aim to maintain a chlorine level of 3 to 5mg/l at all times. How frequently you add more chlorine will depend on your usage and bathing habits. It could be daily, every two to three days or weekly. For 1mg/l, add 2g per 1000 litres.
Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
This level is ideal for swimmers because it isn't so high that it burns the eyes or skin yet helps keep the pool clean. This pH range works well with floating chlorine dispensers.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Run your filtration system for eight hours every day over summer. Back-wash it if you have a sand filter and clean cartridges with Filtrite Filter Cleaner and Degreaser. Add 50 grams of Sanit-eezy Performance per 10,000 litres of pool water. No-one should swim for at least 30 minutes after this.
Mineral Swim is the only system of it's kind combining Australian made ozone water purification technology with 100% natural Dead Sea minerals to make it the safest, healthiest swimming pool about.
Why is chlorine added to swimming pools? Chlorine is added to the water to kill germs. When it is added to a swimming pool, it forms a weak acid called hypochlorous acid that kills bacteria like salmonella and E. coli, as well as germs that cause viruses such as diarrhea and swimmer's ear.
Generally, pool water needs to be replaced once every five to seven years. This should be done during mild weather so that your pool surface is not at risk from strong sunlight and heat. Your pool maintenance company can recommend when it is time to drain your pool.