The average system uses approximately 15-16 gallons per minute, per station.
The average usage of water in a residential sprinkler system is between 12 – 30 gallons per minute depending on the type and size of the sprinkler head.
Normally each sprinkler head can deliver anywhere from I to 6 gallons per minute. A typical residential water meter can deliver 30 gallons per minute. With this in mind; 5 sprinkler heads can use 30 gal/min.
To determine how long you need to water to get one inch, place a plastic container in your yard and set a timer. On average, it will take 30 minutes to get a half inch of water. So, 20 minutes, three times per week will give a lawn about an inch of water. This formula works best with healthy, well-cultivated soil.
For conventional sprayheads, precipitation rates typically range from 1.3 inches to 2 inches per hour. For gear drive rotors, precipitation rates typically range from 0.4 inch to 1 inch per hour. For rotary nozzles, precipitation rates typically range from 0.4 inch to 0.6 inch per hour.
One inch of water or rain is equivalent to 623 gallons per 1,000 square feet.
If your sprinkler output is 1½ inches per week, your sprinklers should run for only ⅓ hour or 20 minutes that week (½ divided by 1½). On a twice-weekly watering schedule, run your sprinklers 10 minutes each time.
Watering with a typical sprinkler using a standard 5/8" garden hose for one hour uses about 1,020 gallons of water; if you water three times per week, that's about 12,240 gallons per month.
To calculate the amount of water you use, multiply the width times the length of your yard in feet to get the number of square feet of area. Then multiply that figure by 0.623 to come up with the number of gallons used (or use our calculator below).
Water Thoroughly: Rotor zones should run for about 30-40 minutes per zone and spray zones 10-15 minutes per zone. 2. Water Frequently : Sod areas should be watered at least 2 or 3 times daily for the first two weeks.
The answer is that it usually takes up to 30 minutes to get a half inch of water. Watering 3 times per week equals to an inch of water on a lawn.
Sprinklers generally cover up wider ground and spread out water at a slow yet steady pace, which makes all the soil moisturized evenly and soaked underground. A watering hose takes time to cover space and can clutter the soil if there's too much water.
Sprinklers should be set to run for about 30 to 35 minutes at a time twice a week. Your goal is at least 1″ of water a week for your lawn.
For vegetables in the summer, we recommend applying about 1 inch of water over the surface area of the garden bed per week. That is equivalent to 0.623 gallons per sq ft. Using that rate, a 32 sq ft bed requires 20 gallons of water per week.
Volume and weight
One inch of rain falling on 1 acre of ground is equal to about 27,154 gallons and weighs about 113 tons. An inch of snow falling evenly on 1 acre of ground is equivalent to about 2,715 gallons of water.
Let's say you want to provide 2” of water to the raised bed: First, multiply the . 62 gallons of water for every inch needed (. 62 gallons x 2 inches) = 1.24 gallons for 2” of water per square foot.
A common rule that is followed for obstructions within 18 inches of the sprinkler deflector is the “three times rule”. This requires sprinklers to be positioned away from obstructions a minimum or three times the maximum dimension of the obstruction.
Using Direct Measurement of Sprinkler Discharge Rate
Keep track of the time it takes to collect a known volume of water. Then, calculate the sprinkler discharge rate (gallons per minute). Example: If it takes 100 seconds to collect 2 gallons of water from a sprinkler head, the discharge rate is 1.2 gpms.
It takes about 0.623 gallons of water per square foot (just over a half gallon) to cover your lawn with one inch of water. To figure out how much water you need to use to reach that one-inch mark, multiply the length of your yard by its width.
Per the USGS Rainfall Calculator, one inch of rainfall equals 6 gallons of water per square yard or 27,154 gallons of water per acre!
Another common gardening recommendation is to make sure your plants get at least one inch of water every week. One inch does not sound like a lot, and it isn't. That's a minimum. It is better for the plants if the soil gets a good soaking down to at least the eight inches mentioned above.