How much should it cost to drywall a 2-car garage?

Author: Trace Schoen V  |  Last update: Friday, June 26, 2026

The average cost to drywall a garage is $800 to $5,000, depending on the size and the finish level. Garage drywall installation costs $1.50 to $3.50 per square foot of wall or ceiling surface. The cost to insulate and drywall a 2-car garage is $1,800 to $9,000.

Is it worth putting drywall in a garage?

Attached garages should almost always be covered with drywall or plaster for the fire rating alone. By Code and by common sense, you dont want a fuel or car fire to engulf your house in minutes, that drywall will often times save your house from major damage.

How much does it cost to insulate and drywall a 2-car garage?

The average cost to insulate and drywall garage space for two cars is between $1,680 and $10,200. Drywall isn't required in a garage (except for walls between the garage and living area of a home), but it does offer some nice benefits. One benefit is that drywall is highly resistant to fire.

How many sheets of drywall do I need for a 2-car garage?

That's approximately 35 sheets of 4x8, which you'll probably want to use if you're relative newbie hanging solo. At 100 a sheet that's 3500.

How to estimate a drywall job?

Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you're using 4-by-8 sheets) or by 48 (if you're using 4-by-12 sheets). If you want to get the cost, just multiply the total number of sheets by the price per sheet.

Dream 2 Car Garage Wall Insulation - Install and Cost

Do I need a permit to drywall my garage?

You'll likely need a permit since this project may require soil grading to avoid drainage issues. Repairing your floor may be more cost-efficient than replacing it if grading is necessary. No permit may be required to hang drywall on exposed wooden wall studs in your garage.

How much does it cost to mud and tape drywall garage?

The average cost to finish drywall is $1.50 to $3.50 per square foot for labor and materials. The cost to tape and mud drywall is $0.35 to $1.10 per square foot and is typically included with finishing.

How much does it cost to insulate a 24x24 garage?

The cost to insulate a 24' x 24' garage is $3,000 - $8,000. Garage size influences the cost of insulation. The 24'x24' garage will house 2 cars and some extra space for other purposes. The average cost to insulate a 24x24' garage with spray foam is $6,000.

What is the best drywall for a garage?

Type X Drywall for Garages

Use Type X fire-resistant drywall for garages, as well as stairwells and areas near furnaces. While not totally impervious to fire, Type X drywall is designed to provide enhanced resistance to fire compared to basic fire-resistant drywall. Type X drywall tends to be thicker than other types.

Should drywall touch the floor in garage?

Always leave a 1/2-inch gap at the floor.

What's the difference between drywall and sheetrock?

One key difference between the two is that sheetrock is a brand name of drywall made by the United States Gypsum Corporation. Another difference lies in their production process; sheetrock has a slightly denser core than drywall due to the addition of a small amount of wood fiber to the gypsum core.

Why is there plywood behind drywall in garage?

Because of its moisture resistance, it will fare better in a garage setting where such conditions are common. Plywood, when applied to the walls of your garage, acts as an additional soundproofing and insulating barrier. You may paint or stain the plywood to improve the appearance and make the walls simpler to clean.

What can I use instead of drywall for garage cheap?

Cost-Effectiveness: Plywood and OSB are often more affordable than other wall materials like fiber cement board or metal panels, making them a budget-friendly option for homeowners looking to upgrade their garage walls without breaking the bank.

How much is labor to hang drywall?

Drywall installation costs $1.50 to $3.50 per square foot, depending on the ceiling height, drywall type, and finish level. Drywall costs $0.50 to $0.80 per square foot for materials. The labor cost to hang and finish drywall is $1.00 to $2.70 per square foot. The cost to drywall a 12' x 12' room is $580 to $1,800.

How much does it cost to insulate a 40x60 shop?

Final Cost of Insulating a 40'x60' Steel Building

After you factor in the costs of materials and the costs of construction, you'll find that it will run you between about $2,400 and $6,600 to insulate your 40'x60' metal building.

What is the cheapest way to insulate a garage wall?

Open-cell spray foam is the cheaper of the two options. It's often referred to as “low-density” due to the fact that it weighs only 0.5 lbs/ft3. With an insulation value of approximately R-3.8/inch, ocSPF serves many of the same purposes as fiberglass insulation batts, but with better coverage in small corners.

Should I insulate and drywall my garage?

If you're simply storing your car in the garage, which is the intended purpose, you don't need insulation. However, if you plan to use your garage like an extension of your home, as many homeowners do, adding insulation can definitely be a worthwhile upgrade.

How much does it cost to sheetrock a two car garage?

The average cost to drywall a garage is $800 to $5,000, depending on the size and the finish level. Garage drywall installation costs $1.50 to $3.50 per square foot of wall or ceiling surface. The cost to insulate and drywall a 2-car garage is $1,800 to $9,000.

How to charge for taping and mudding drywall?

Cost per square foot for mud and tape drywall jobs

On average, the labor and material cost to mud and tape drywall is between $1.50 and $3.50 per square foot. Our findings show that there are three factors that influence drywall finishing costs: Room size: Larger rooms have more drywall to finish.

How do you bid mudding drywall?

How to Bid on a Drywall Job
  1. Choose the right project. Before quoting a drywall project, you must know the best projects to bid for your company. ...
  2. Review bid documents or make a site visit. ...
  3. Perform a quantity takeoff. ...
  4. Price your materials and supplies. ...
  5. Estimate labor. ...
  6. Add overhead and profit. ...
  7. Write your proposal.

Can I drywall my own garage?

If you're going to drywall a garage by yourself the first thing that you'll need to do is buy your materials. You'll need drywall, of course. Drywall comes in sheets and it's a good idea to get extra sheets in case you measure wrong, a piece of drywall is damaged, or an accident happens.

Can I convert my garage into a bedroom without planning permission?

Planning permission is not usually required to convert your garage into additional living space for your home, providing the work is internal and does not involve enlarging the building.

Does drywall in a garage need to be fire rated?

A: First, fire-rated systems are only required if the garage shares a wall or a ceiling with the home. If you are doing repairs in the garage you should replace with like materials, but remember it is the wall system that is fire rated not the product itself.

Previous article
Why does my AC run for 30 minutes then trip the breaker?
Next article
Are chemical mosquito repellents safe?