How much is it to hydrojet a sewer line?

Author: Tavares Padberg  |  Last update: Monday, November 10, 2025

How much does it cost to Hydrojet old pipes? On average, hydro jetting old pipes can cost between $350 and $600, though in more severe cases it could be up to $1,000 or higher. The same pricing goes for descaling sewer pipe cost.

How much does it cost to hydrojet a sewer line?

The average cost of hydro jetting a main sewer line in 2022 is $700-1,100 (Forbes).

Why is hydrojet so expensive?

Why is hydro jetting so expensive? Hydro jetting is usually pricier than other options, including snaking and chemical drain cleaners. This is because there is expensive technology, plus a very advanced level of skill required.

How much does Roto Rooter charge for hydro jetting?

A sewer camera inspection costs $125 to $500 if you hire a local plumber or $295 to $350 from Roto-Rooter. Cleaning a main sewer line costs $150 to $500 for snaking or $250 to $800 for hydro jetting, depending on the individual plumber's rates.

How much does it cost to clean out a main sewer line?

Clearing a clogged sewer line costs $250 to $800, depending on where the clog is located, what causes it, and the necessary cleaning. A clogged sewer line is typically an indication of a much larger problem. The main sewer line is much larger and can typically handle more volume than the average drain in your home.

Hydro-jet your own sewer line, this is the set up you need. #hydrojetting

Is main sewer line covered by insurance?

Does homeowners insurance cover your sewer line if it's damaged? Damage to your sewer line may be covered by your policy if it is caused by perils such as hail or windstorms, explosions, lightning or fire, damages caused by vehicles, vandalism or falling objects.

Can you clear a main sewer line clog yourself?

You can tackle a clogged sewer line using other strategies if you don't have a snake on hand. First, you can run hot water down the drain for 5 to 10 minutes to see if that helps break up the clog. If it doesn't, pour equal parts of vinegar and baking soda into a bowl and then pour that mixture down the drain.

Is hydro jetting worth it?

Of course, hydro-jetting will cost a little more than your regular drain cleaning services. Yet, in the long term, it will save you money. This method clears the entire pipe, eliminating problems for years into the future, and that saves you time and money without a doubt.

How long does it take to hydro jet a sewer line?

How Long Does Hydro Jetting Take? The average time to perform hydro jetting is about 60 minutes. If you have a lot of cleaning, you can expect about 90 minutes.

What is the difference between Roto-Rooter and hydro jet?

While rooters scrape the sides of a pipe, the hydro jetter will blast off all debris in the pipe and wash it out. In addition to being 30-50% more efficient, the hydro nozzles spraying pressurized water can be as aggressive or gentle as they need to be – which makes a huge difference in the quality of the work.

Can hydro jetting damage pipes?

Given the amount of force used, hydro jetting can damage frail, aging pipes. Older sewer pipes that are more susceptible to cracks and breaks shouldn't be treated using hydro jetting. In scenarios when pipe age is a concern, traditional cleaning methods should be utilized instead.

How much does it cost to flush pipes?

The cost of drain cleaning averages about $241, but it can fall between $147 and $344, depending on the location and extent of your clog. There is nothing like a backed-up drain to derail your plans. Luckily, there are different solutions that will have you—and your pipes—back on the move in no time.

Is hydro jetting better than snaking?

Typically, professional plumbers will start with a snake, since most clogs are relatively minor. But hydro jetting may be the best option for clogs in multiple drains or severe clogs that continue to recur.

Does hydro jetting remove roots?

Hydro jetting is a highly effective method for clearing tree roots and restoring your plumbing system to optimal condition.

How much does hydro jet drain cleaner cost?

Hydro Jets cost between $300 to $3000. With an average cost around $700.

How much does a sewer line pump cost?

Installing a sewer ejector pump costs $2,500 on average. Costs range from $100 for a low-capacity plastic pump that you install yourself (although this is one home improvement project that's best left to the pros) to over $6,500 for a high-capacity and powerful grinder pump installed by a professional.

How much do plumbers charge for hydro jetting?

Average cost of hydro jetting

“In California, expect to pay a flat rate of $500 to hydro jet a kitchen or bathroom sink, or $1,000 for a sewer or toilet,” says Rave.

How long does it take a plumber to unclog a main sewer line?

Clearing a clogged sewer line can take an hour to a few hours, depending on the blockage. If your lines are severely blocked, a video inspection and more advanced techniques may be necessary to find and address the clog.

How often should hydro jetting be done?

Whether your drainage system gets clogged easily or not, hydrojetting is recommended every 18 to 22 months to prevent clogs.

How much does it cost to clean a sewer line?

According to a . net plumbing job estimator, the national average charge for a professional to service your sewer line is $196-$289. The lower end for a straightforward drain cleaning is $55, with the maximum around $1300.

What are the disadvantages of hydro blasting?

The Dangers of Hydroblasting
  • High pressure impact. High-pressure water cleaning is normally performed using jet streams that can have the velocity of a 45-caliber bullet (and more) and do just as much damage. ...
  • Chemical exposure. ...
  • Musculoskeletal injury. ...
  • Machinery/Equipment. ...
  • Confined spaces.

How do you know if you need hydro jetting?

5 Warning Signs Your Pipes Need Hydro Jetting Services
  1. Slow Draining Pipes. ...
  2. Noisy Drain Pipes – Screeching, Hissing, Gurgling and Ticking. ...
  3. Bathroom or Kitchen Sink Drain Smells Bad. ...
  4. Water Bill Increases. ...
  5. Old, Deteriorating Plumbing Pipes.

How do plumbers fix a clogged sewer line?

How Professional Plumbers Clean Your Drains
  1. Manual Drain Snakes. A manual drain snake, also known as a plumber's snake or a drain auger, is a small boring tool that rotates slowly as it's physically pushed through a stubborn clog. ...
  2. Motorized Drain Snakes. ...
  3. High-Definition Drain and Sewer Line Cameras. ...
  4. Hydro-Jetting Machines.

Why should you never use baking soda and vinegar to unclog a drain?

The fizzing reaction and gas created may help loosen some small blockages. However, it is not typically strong enough to break down larger clogs or remove hard-to-reach debris. As a result of the above facts, if you have a serious drain clog, using baking soda and vinegar is unlikely to be effective.

Previous article
Is a broken oven an urgent repair?
Next article
What does it mean when a refrigerant is superheated?