How much does labor cost for epoxy coating?

Author: Ms. Pamela O'Reilly  |  Last update: Monday, May 5, 2025

Cost: Approximately $2 per square foot for materials, plus an additional $2 to $4 per square foot for installation labor.

What is the labor cost of epoxy coating?

Labour cost: Labour costs vary in different cities and regions with skilled labour charging as high as Rs. 500 per square foot. Region/city: Epoxy flooring costs can vary significantly based on your location in India.

How much is labor for epoxy resin?

Labor costs average $1 to $7 per square foot, while equipment and materials cost about $2 to $5 each. For epoxy flooring, installation fees are typically between $3 and $12 per square foot.

What is the rate of epoxy per sq ft?

Epoxy Coating for Existing Floors: Cost: ₹35 to ₹150 per square foot. Details: The cost range covers epoxy coatings for existing concrete or cement floors.

How much epoxy do I need for 1000 square feet?

Estimate Amount of Epoxy Needed Per Square Foot

(or 6.4 ounces per sq. ft.) Divide your square footage by 20 to get the gallons required (or multiply by 6.4). You can use 4.5-6.5 ounces for your artwork layer and then do a clear full epoxy flood coat to smooth it out and protect it.

How much MONEY can you make installing EPOXY GARAGE FLOORS? 💰

Why does epoxy cost so much?

This includes rigorous testing and quality assurance processes, which can drive up production costs. Ultimately, it's this combination of specialized formulation, extended curing times, higher resin volumes, and advanced quality control that contributes to the higher cost of deep pour epoxy compared to table top epoxy.

What is the average cost to epoxy a 2 car garage?

For the average 2-car garage that totals about 360 square feet, that'd be $1,080 on the lowest end and $4,320 on the highest. The cost of epoxy garage flooring varies significantly due to several factors, including: The type of epoxy. The size of the space you need to be coated.

How much epoxy for 500 square feet?

A: Our EPOXYARMOR High Performance Clear Top Coat 1-Gallon Unit will cover 210-400 square feet at 5-7 mils thickness and our High Performance High Wear Urethane 1-Gallon Unit will cover 500 square feet at 3-5 mils thickness.

How long does epoxy take to dry?

It generally takes about 24 to 72 hours for the epoxy floors to dry completely. After 3 days you should be able to apply light foot traffic, for instance, if you need to use the space to access other areas in your home. But, if it can be avoided, it is best to wait for the full chemical-resistant cure.

Is epoxy resin business profitable?

Epoxy resin has become a popular material for artists and crafters due to its versatility and durability. However, it can also be a profitable venture for those looking to start a small business or make some extra income on the side using epoxy resin.

What is the charges for epoxy filling?

  • Epoxy Grout. ₹ 550/Kg. Stomenti India. ...
  • Epoxy Grout Filling For Tile Joints. ₹ 550/Bucket. Vihotkrupa Construction Chemicals. ...
  • Epoxy Tile Grout. ₹ 480/Kg. Jay Khodiyar Industries. ...
  • EVERSIL EPOXY GROUT. ₹ 699/Kg. Eversil Chemicals Private Limited. ...
  • Tile Epoxy Grout. ₹ 555/Kg. ...
  • Kerakoll Fugalite Eco Epoxy Tile Grout. ₹ 700/Kg.

How many gallons of epoxy for a 2 car garage?

For a typical one car garage, two gallons of epoxy should be more than enough for two coats after a primer has been applied. Three gallons should cover the average two car garage, and five gallons will generally be needed for a three car garage.

How many coats of epoxy?

Generally, just one flood coat, plus a quick seal coat. If you're using a high-quality table top epoxy, you only need one flood coat layer of epoxy most of the time. Our premium UltraClear Table Top Epoxy self-levels to 1/8 of an inch thick.

What is cheaper than epoxy?

Resin is often less expensive and more flexible, while epoxy is generally more costly and more rigid.

What is the life expectancy of epoxy coating?

Average Epoxy Lifespans for Industrial Settings

You can reasonably expect your epoxy flooring to last for 5-10 years in a commercial or industrial setting.

How much will 1 gallon of epoxy cover?

Most common table top and bar top epoxies provide approximately 12 sq feet per mixed gallon coverage at 1/8″ thickness. When in doubt, buy more.

How thick should an epoxy floor be?

The epoxy coat can be between 300 microns and 5 mm thick. 300 microns is the thinnest you can go. 5mm is the thickest you can choose, but there have been cases before where the floor needs a 1 cm thick layer.

What is the downside to epoxy garage?

Epoxy has poor flexibility, meaning it doesn't do well in drastic temperature changes where it must constantly expand and shrink. This will further affect the adhesion to the concrete surfaces and thus result in chipping or peeling.

Can you epoxy a garage in one day?

Fast installation.

Looking for a floor coating that won't take days or weeks to cure? E2U's One Day Garage Floor System can be walked on in just a few hours and driven on within 24 hours of job completion. *Temperature may affect curing time.

How much epoxy for 1,000 square feet?

General rule for epoxy coverage

There is a general rule to help you understand how much epoxy you need. For coating epoxies, one mixed gallon (half a gallon each of resin and hardener) will cover twelve square feet at a thickness of 1/8 of an inch.

How many years does epoxy last?

The longevity of an epoxy floor system will vary based on thickness, use and maintenance. Typically, epoxy floors last between 10 and 20 years; much longer than a painted concrete floor, which will chip and wear quickly in high-traffic areas.

What is the price range for epoxy?

To give you an idea: A basic Epoxy Kit for DIY, sufficient for a one-car garage (about 250 square feet), could cost from $50 to $600. Self-Leveling Epoxy starts at around $45 per gallon, which should cover 200 square feet. Quartz Epoxy can range from $125 to $275 per gallon, covering approximately 50 square feet.

Is epoxy high maintenance?

Epoxy floors are famously low maintenance. They are durable, generally stain-resistant and wipe clean, making them easy to maintain, even in areas with high foot traffic.

Previous article
What sticks to polyurethane?
Next article
Will homeowners insurance cover a new water heater?