Travertine Sealing The cost to seal your travertine should be anywhere between $0.50 to $1.50 a sq. foot depending on the sealer they will be using.
From 13 Facts About Travertine Tile, you'll remember that Travertine is a natural and porous stone. As such, it needs to be sealed to protect its natural beauty (not to mention your investment) so it doesn't absorb liquids – think red wine – and become permanently stained.
Because cleaning natural stone is difficult, it is hard to give generalized pricing because it depends on the stone, color, finish, wear and tear, and square footage. On average, you can expect to pay no more than $1.50* per square foot to clean and seal your stone.
You must seal your Travertine tiles right when you install them. After that, it is best to reseal them every one to three years. Resealing also depends on the foot traffic and frequency of cleaning the tiles. If they start to look dull or you notice any stains, it might be time to bring out the sealant again.
If you are deep cleaning travertine, then you can use a strong alkali cleaner, but you must remember to rinse the floor well to remove all traces of the cleaner. If you are undertaking regular maintenance clean, then use a ph Neutral cleaner, preferably containing a small amount of stone soap or linseed oil.
Use a Mild Cleaning Solution:
Use a pH-neutral stone cleaner or a mixture of warm water and a few drops of dish soap to clean your travertine. Avoid acidic or abrasive cleaners that can damage the sealant.
Pressure Wash
Just be careful with the type of nozzle and how much pressure you use for travertine cleaning. Use a nozzle with a wide spray pattern to clean travertine tile. And avoid getting the nozzle too close to the surface of the pavers. High pressure can actually carve grooves into the surface of the travertine.
What happens to Travertine if not sealed? If you leave honed and unfilled outdoor Travertine tile or paver unsealed, because of the porosity, the stone will etch in case of any liquid spill. You will lose the beauty of this stone in no time.
With its unique, natural beauty, travertine is a durable, long-lasting material. Thanks to its resilience, it's perfect for both indoor and outdoor spaces, and with proper care, it can last a lifetime. Maintaining and cleaning travertine tile will keep it looking perfectly polished for a long time.
Travertine Sealing
There are two types of travertine sealers that should be used on travertine, water based and solvent based, both should be a penetrating sealer. STAY AWAY from anyone offering a topical sealer. The cost to seal your travertine should be anywhere between $0.50 to $1.50 a sq.
Our technicians can identify and clean natural stone including travertine, marble, limestone, slate, granite, flagstone, concrete, terrazzo, and Saltillo. We use a high-pressure rotary wand to diligently extract dirt and grime helping to preserve the life and beauty of your precious stone floors.
Grout Doctor pricing is $200 to $500 on average, depending on the service package, travel costs, and region. Grout Doctor offers steam cleaning, tile repair, regrouting, recaulking, grout recoloring, and sealing.
Enhanced Appearance
Travertine sealers enhance the natural colors in the stone. They can give a glossy look that makes the surface appear clean and new.
It is resistant to cracking, chipping, and fading, making it an ideal choice for a pool deck exposed to constant sun exposure, pool chemicals, and water splashes. Natural Porosity: Travertine is a naturally porous stone, allowing water to drain through the surface.
Sealing travertine is a pivotal measure in safeguarding its allure and structural integrity. Without this protective layer, travertine becomes vulnerable to moisture infiltration, paving the way for unsightly stains, etching, mold mildew, and potential structural deterioration from salt or chloride attack.
A: It depends on the type of sealer used and the amount of foot traffic the travertine tiles are being exposed to. Australia's Deepshield® range of deep impregnating water based sealer's, offer long term benefits with Deepshield Gold® lasting up to 15 years. Topical sealer's have a life expectancy of around 3 years.
If you notice any unsightly grass or weeds pop up, tear them out from the root and apply a chemical weed deterrent to prevent it from recurring. Adding stone edgers between your travertine deck and the rest of your yard can also help create separation and prevent weeds from invading your travertine tiles.
Clean Your Travertine Pavers Before Sealing
Be careful not to use too much pressure as this can damage the pavers. Use a mild detergent and water to scrub the surface of the pavers with a soft-bristled brush. Rinse thoroughly with water. Allow the pavers to dry completely before sealing.
Travertine is a porous natural stone. While this contributes to its intricate appearance and unique aesthetic it also means that it can easily absorb moisture. The more moisture that is absorbed, the more susceptible the pavers are to mould growth.
Normally travertine tiles take 2 - 4 coats of the topical sealer.
If your travertine pavers aren't sealed regularly, they'll start to fade due to sun damage. Even if your pavers don't receive harsh sunlight year-round, any sunlight they do receive will be damaging and lead to their color fading rapidly.
Don't: Use Abrasive Pads
After proper sealing, cleaning should be accomplished with nothing more than a soft (preferably microfiber) towels or clean rag, along with a stone-safe cleaner like MARBLELIFE® Marble & Travertine Cleaner. Abrasive materials will scratch this soft surface over time dulling the surface.
Simple Green Stone Cleaner and Polish is safe for daily use on granite, marble, travertine, limestone, porcelain, ceramic, quartz, and engineered stone surfaces. Purpose of product.
A good cleaner for travertine is DAWN Original or Ultra Dish Soap. Mix it in a spray bottle 50/50 with warm water. Using a scrubbing sponge, apply it to the shower walls and scrub. Do one wall at a time.