How much does it cost to replace a circuit board in a furnace?

Author: Mr. Kayley Spinka  |  Last update: Monday, March 23, 2026

A furnace control board replacement costs $300 to $650 on average. A furnace circuit board or motherboard costs $50 to $300 for the part alone, plus $250 to $350 for replacement labor.

Is it worth replacing a control board on a furnace?

Conclusion. Replacing a furnace control board is an essential aspect of maintaining the efficiency and safety of your home's heating system.

What are the symptoms of a bad furnace circuit board?

Control boards can fail for various reasons, but the tell-tale symptoms look the same:
  • Warning lights flashing or staying on.
  • Inability to settle on a stable temperature.
  • Stuttering or interrupted furnace sequence.

What is the most expensive part to replace in a furnace?

A heat exchanger replacement is often one of the most costly repairs in a furnace, and the expense can sometimes rival that of installing a new furnace. Typical replacement costs vary widely but can easily reach several thousand dollars, especially if labor costs are factored in.

How much does it cost to replace the circuit board?

Air conditioning circuit board replacement costs $150 to $700 if the AC unit is not under warranty or $100 to $300 for labor if under warranty. AC control board prices are $50 to $400 on average for the part alone, depending on the brand, type, and model.

How Much Does it Cost to Replace a Furnace Motherboard Control Board

How much does a new circuit board for a furnace cost?

Depending on how technologically advanced your current furnace is, replacement costs for a new circuit board can run from around $300 to $1,200.

How long does it take to replace a furnace circuit board?

A circuit board replacements take 20 to 30 minutes. A furnace control board lasts 10 to 15 years on average.

Is it worth fixing a 20 year old furnace?

Repair: If your furnace system is less than 15 years old and the cost of repair is less than half the cost of replacement. Replace: If your furnace system is more than 15 years old and requires a costly repair to maintain efficiency.

What is the most expensive part of HVAC?

Usually, it is a quick fix, but sometimes the failure can be caused by a much bigger problem. The most expensive part of an AC unit to replace and repair is the air compressor.

What is the life expectancy of a furnace circuit board?

The average furnace circuit board, also referred to as its “motherboard,” will last anywhere between 10 and 15 years.

What causes the circuit board to go out on a furnace?

Power Surges. Speaking of electrical discharge, another form of this can occur as a power surge. Power surges can come from faulty wiring, lightning strikes, or electrical overload. The energy from the surge can fry the furnace circuit board, making it unsalvageable.

Can I replace my own furnace control board?

If you're a pretty experienced DIYer, you can replace the control board on a furnace yourself for about $50 to $300, or the cost of the replacement circuit board. You'll need to pay close attention to how the existing control board is installed to make sure you wire the new circuit board correctly.

How do I know if my furnace circuit board is bad?

Now that you know where the control board is and what it does, let's explain the top signs that your control board is malfunctioning.
  1. Illuminated Warning Lights. ...
  2. Immobilized Switches on the HVAC Control Board. ...
  3. Faulty Soldering Connections. ...
  4. Interrupted Sequencing. ...
  5. Temperature Regulation Issues.

What blows a circuit board furnace?

Faulty and loose wires can create electrical shorts that blow out a control board fuse. The furnace's vibrations can loosen control board wires over time and prevent them from sending information to the unit.

What is the best furnace brand?

The 5 Best Furnace Brands
  • Carrier Furnace: Best Warranty.
  • Lennox Furnace: Best Company Reputation.
  • Bryant Furnace: Best for Durability.
  • Trane Furnace: Most Years of Experience.
  • Amana Furnace: Best for Efficiency.

What is the most expensive part on a furnace?

The Most Expensive Parts to Repair in a Furnace
  • Heat Exchanger. Typical Cost: $500 – $1,500. ...
  • Blower Motor. Typical Cost: $400 – $1,200. ...
  • Circuit Board. Typical Cost: $300 – $650. ...
  • Gas Valve. Typical Cost: $200 – $1,000. ...
  • Thermostat. Typical Cost: $100 – $500.

How much does it cost to replace the circuit board on an air conditioner?

Replacement AC Circuit Board

The circuit board controls the operation of the blower fan motor as your air conditioner runs. The cost to repair this issue is typically between $100 to $800.

What is the highest paying HVAC job?

High Paying HVAC Jobs
  • Thermal Engineer. Salary range: $80,000-$129,000 per year. ...
  • Hvac Project Manager. Salary range: $80,000-$112,000 per year. ...
  • Hvac Sales Representative. Salary range: $59,500-$110,000 per year. ...
  • Cfd Engineer. ...
  • HVAC Engineer. ...
  • HVAC Design Engineer. ...
  • Hvac Estimator. ...
  • Hvac Residential Service Technician.

Why is replacing a furnace so expensive?

Installation Entails More than Just the Furnace

For a gas-powered furnace, a contractor must set up a gas connection and vent. Installing an electric furnace requires running wiring, adding a circuit breaker, or perhaps updating an electrical panel. Holes are often drilled for pipes and wires.

Can a furnace last 30 years?

Yes, furnaces can last up to 30 years, particularly high-quality models with proper maintenance. Factors like regular servicing, timely repairs, and appropriate usage significantly impact their lifespan.

Is it better to undersize or oversize a furnace?

Even a slightly undersized furnace will accomplish the job the majority of the time. Taking things down a few sizes will more than likely solve some of your common heating problems like too high of a utility bill while half of your house is blazing and the other half is an icebox.

How do I know if my circuit board is bad?

Start with a Visual Inspection

Often, circuit boards deployed in the field are damaged by electrical surges and there are telltale signs on the PCB. Look for a burnt spot, particularly on the power supply module or I/O and connectivity ports. Pay attention to cracked ICs, broken traces, and blown capacitors.

What causes a circuit board to go out?

Three of the main reasons PCBs end up burning are: Extreme heat. Improper component spacing. Component failure or technician error.

How do you reset the circuit board on a furnace?

Follow these simple steps: First, turn off the power supply to the furnace by turning off the breaker in the circuit box. Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor.

Previous article
Can sun faded fabric be restored?
Next article
How long to keep pets away from bug spray?