How much does it cost for pipe relining?

Author: Christop Oberbrunner I  |  Last update: Monday, August 25, 2025

In many cases, the cost per foot of trenchless pipe lining can range from $80-$250 per foot, often averaging out at approximately $160 per foot. Smaller scale jobs tend to be more affordable and cost less with this metric of cost in place.

Is pipe relining worth it?

Advantages of Pipe Relining

Minimal damage to your property. More efficient. Safe and durable. Very effective if the pipes are in moderate condition.

How much do relining pipes cost?

Generally we provide the cost of pipe relining based on a per-metre amount. The cost of pipe relining per metre can range from $400 to $1000 or more, depending on the diameter, length, and access of the pipes in question.

What is the cost of pipe relining?

So you've had a pipe video inspection done and the plumbers say that your cast iron pipe have to be replaced. Then you did some research and found out by pipe lining and that it could save you a lot of money. The question is how much money? Under houses pipe relining can range from $100 to $300 per linear foot .

How long does pipe relining last?

If properly maintained, CIPP lining can last for fifty to sixty years. Without being cured, has a ten to fifteen-year lifespan on its own. This is due to the possibility of the liner slipping and becoming unstable. A pipe that has already been cured might have several layers of epoxy applied to it over time.

Epoxy sewer liner converting a storm drain to receive sewage

What are the disadvantages of relining?

The liner may eventually wear out or become damaged, requiring additional repairs in the future. Limited to certain types of pipes: Drain relining is typically only suitable for certain types of pipes, such as clay, cast iron, and PVC. It may not be suitable for other materials, such as pitch fibre or asbestos.

What is the difference between pipe bursting and relining?

Pipe bursting provides you with a completely new line, while pipe lining only addresses the flaws present in the pipes. Overall, pipe bursting offers better results than pipe lining in the long run. However, if cost is an issue or the issues are minor, pipe lining is enough to restore your line to good working order.

What is the cheapest way to replace a sewer line?

Trenchless sewer repairs, such as pipe lining or pipe bursting, are typically 30-40% less expensive than traditional excavation and less invasive. Traditional excavation, which involves digging a trench to access the damaged pipe, is usually more expensive and can cause significant damage to your yard.

Does Roto-Rooter do pipe lining?

Most Roto-Rooter locations provide pipe relining or pipe bursting services and they have the tools and knowledge to inspect your existing sewer and arrange to locate, map and mark nearby utility lines.

What are the limitations of pipe relining?

The only notable disadvantage of pipe relining technology is that it can't always be performed. This occurs when pipes are damaged significantly with large internal gaps, meaning that a pipe relining solution wouldn't be able to mould into an adequate structure.

What size pipes can be relined?

Pipes smaller than 40mm are generally not suitable for relining because the liner material, once cured, would overly restrict water flow. However, pipes up to 225mm like some larger stormwater drains may still be candidates for this trenchless solution.

How much does a reline cost?

Cost for a Denture Reline

A soft denture reline may cost $150 to $400 or more, while a hard denture reline will run you $200 to $400 and sometimes more as well. For most denture wearers, a reline is necesssary every two to four years.

Why is sewer line replacement so expensive?

Sewer work is expensive because of the labor-intensive process involved, which includes excavation, pipe removal, and installation of a new one. It requires significant manual labor and expertise, driving up the overall cost.

How many times can you reline a pipe?

In addition, with CIPP, pipes can be relined more than once if needed. However, the chances of needing to are slim due to long-lasting effects that prevent failures.

Can I reline my own pipes?

DIY pipe relining is a process that can be done by an individual using a DIY pipe relining kit. This process involves inserting a flexible tube or liner into the damaged pipe, which is then inflated and allowed to cure.

What are the disadvantages of trenchless pipe lining?

Cons of CIPP Lining
  • Very large and very small diameter pipes may not be serviceable.
  • CIPP doesn't work for extreme damage, collapses, and bellies.
  • Initial equipment and material costs are higher than traditional trenching methods, but the lack of trenching makes up for the cost in most cases.

How much does pipe relining cost?

Pipe Lining

Replacing an old sewer system with a trenchless one requires a professional to blow a resin-coated lining through the old pipe. Sewer pipe lining costs between $135 and $150 per linear foot.

How much does it cost to have Roto-Rooter come out?

Roto-Rooter is a national service available in every U.S. state, including Alaska and Hawaii. Flat-rate pricing might be slightly higher in states with a higher cost of living, such as California or New York, but most plumbers charge between $45 and $200 per hour.

How long does it take to reline a sewer pipe?

The process of completing CIPP pipe lining is usually done and over in a matter of several hours during one day. The actual relining involves inserting the liner via an access point. A new coating is then applied to the inside of the affected pipe. Once it cures, you'll have a like-new pipe within the existing pipe.

Does homeowners insurance cover sewer line replacement?

Does homeowners insurance cover your sewer line if it's damaged? Damage to your sewer line may be covered by your policy if it is caused by perils such as hail or windstorms, explosions, lightning or fire, damages caused by vehicles, vandalism or falling objects.

How deep are sewer lines buried?

For instance, residential sewer line depth ranges from 18 to 30 inches. However, city sewer line depths are different. Your city's sewer lines must always be deeper than the deepest residential pipe to allow waste to flow downhill. As such, these lines can go as deep as needed.

Can sewer pipes be repaired without digging?

Roto-Rooter's Zero-Dig Pipe Restoration Services can bring most old sewers and drainpipes back to life without digging trenches to repair or replace them. Little to no digging is required and some trenchless services can be completed in as... Fast, Friendly and Professional Service.

How effective is pipe relining?

Trenchless pipe lining can be an extremely effective option for repairing and preserving an older sewer line. When the process is done correctly by an experienced plumbing company, it should allow the existing sewer line to last for around another 50 years in most cases.

How much does pipe bursting cost vs pipe lining?

Pipe bursting is basically the underground replacement of your pipe, and the cost will depend on the depth and length of the damaged pipe. Relining your damaged pipe will usually cost between $80 to $250 for each foot, which will result in total repair costs between $4,000 and $20,000 depending on the circumstances.

Can you reline a collapsed pipe?

You can have pipe relining conducted which will add additional strength to the existing pipe in its weaker areas. Pipe relining does not require any digging but cannot be done once the pipe has collapsed.

Previous article
What is the $5000 rule for AC?
Next article
Is fire caulk the same as regular caulk?