Beeswax does tend to darken wood slightly, as does any other finish used on it. That's actually not so much darkening the wood as bringing out its natural color by “wetting” the surface. Nevertheless, wood that is finished and repeatedly polished with beeswax will gradually darken over time.
Restores the natural beauty of the wood
The beeswax “darkens” the color of the wood making it look like new.
Those in the latter camp must content themselves with the fact that finishes of any type – poly, shellac, lacquer, wax – all change the wood's appearance. While they accentuate the grain and beauty of the wood, they also darken and deepen its color. This is usually a good thing.
Stains the wood surface
Because wax penetrates deep in the wood, it can cause staining. The darker the pigment in the beeswax, the stronger the potential for staining is. Wax can also cause white spots if not applied evenly.
Beeswax has many benefits to wood, not only does it help maintain and keep wood in good condition, but it also cleans wood, polishes and protects the wood from stains and spills. This is why beeswax is one of the most popular furniture polishes.
Small, shallow scratches in most wood finishes can easily be removed by rubbing beeswax across the damage. When there are a lot of small scratches, buff them out with pumice and rottenstone and then polish with a coat of paste wax.
Beeswax contains high-carbon paraffin which not only feeds into the wood but also seals and protects its surface, especially from moisture and sunlight. This ensures much needed durability especially for those furniture that are left sitting next to an open window or door, exposed to damp winds or even rainstorms.
Q. How often should you use beeswax on furniture? A. Hardwoods such as Oak, Mahogany and Walnut should be treated regularly with Beeswax Polish; three of four times a year will keep the wood in best condition.
Yes. Wax can be applied over almost any other wood finish including stain, oil, varnish and paint.
Beeswax does tend to darken wood slightly, as does any other finish used on it. That's actually not so much darkening the wood as bringing out its natural color by “wetting” the surface. Nevertheless, wood that is finished and repeatedly polished with beeswax will gradually darken over time.
When using OIL BASED finishes: The best method for bringing out the natural characteristics of wood grain is to use a penetrating oil like Tung oil, Walnut oil or double boiled Linseed oil.
To limit wood damage, preserve furniture AND keep it looking natural you'll want to seal raw wood with Liming or Cerusing wax. Any other wax or poly (from my experience) will darken the wood, enhance orange tones and change the color.
White and yellow beeswax pellets differ in color based on the filtration process. White beeswax is turned white after undergoing a pressure-filtration process. Yellow beeswax is typically processed less and therefore left in its more natural state.
At room temperature beeswax tends to melt, which makes it very sticky and slippery. This property may not make it ideal for surfaces of woodworking benches or table saw tops, but it is ideal for wood flooring where it is important that the surfaces have friction and do not allow you to slip.
Beeswax furniture polish is a safe, natural, and effective way to bring new life to wood furniture. You can use beeswax polish to treat finished furniture, to clean up damaged pieces, or as a stand-alone finish on new woodworking projects.
Use Touch of Beeswax after using Touch of Oranges Wood Cleaner. USE ON FLOORS, CABINETS, AND FURNITURE – Touch of Beeswax can be used on all kinds of wood surfaces. Use it as a conditioner for your hardwood floors. Use it to restore and protect your kitchen cabinets and other wooden cabinets.
Yes, applying beeswax is a natural way to protect wood. It also gives wood a warm glow.
Let the beeswax dry on wood from 20 minutes to 1 hour.
For this reason, you can check if it is completely dry, touching the surface with the tip of a finger and it should not be sticky. The dry wax also has to soak in for a while.
When using beeswax as a protective layer, a rule of thumb is to reapply once a year to keep its natural-looking shine. However, it also leads to another problem: the build-up of coatings on the furniture.
Beeswax and it's beneficial properties
Since beeswax is waterproof, it keeps unwanted moisture out of food while trapping the food's natural moisture in.
A 1:1 mixture of cooking oil and white vinegar is the most effective way to remove scratches from wood furniture. Dip a rag in the mixture, and rub it on the scratch. Allow the mixture to sit for 1-2 minutes before wiping away excess liquid.
#2 Use Homemade Polish to Camouflage Scratches
Mix equal parts olive oil and vinegar, which work together to remove dirt, moisturize, and shine wood. Pour a little directly onto the scratch. Let the polish soak in for 24 hours, then wipe off. Repeat until the scratch disappears.
The polish hides unsightly nicks and scratches - restoring the look of your wood furniture and bringing out wood's natural beauty.