Labor Cost by Square Foot The average labor cost to install tile is $10 per square foot, with a total range of labor costs from $4 to $15 per square foot.
Labor. Another significant factor in the cost to install tile flooring is labor costs. The national average cost of labor can run between $4 and $14 per square foot. However, to install ceramic or porcelain tile floors, expect to pay anywhere from $4 to $25 per square foot.
“The labor costs for tile installation can be between $3-$15 per square foot—or, if the contractor charges hourly, it could range between $30-$120 per hour,” Micetich says.
Tiling costs per m² usually work out around £100 per square metre, including the cost of tiles and other materials. But this figure varies a lot depending on each scenario. Tilers charge between £150 – 350 as their day rate for labour only. That's a wide range; a day rate is just one way that tilers charge.
Tiling is a finishing trade. Tiling work is permanently visible, unlike pipes and cables behind walls or under floors. Because of this, the quality of the work and skill of the tradesperson completing it is what sets the value.
The prices for professional tiling services vary between $30/$45 on average up to $100/$120 per square metre, whereas the hourly rates range from $45 to $100 per hour.
Labor Cost for Tile Installation
Labor costs for tile installation are around $3 to $15 per square foot, depending on the above factors. Some contractors charge hourly rates, ranging from $60 to $120 per hour. To get accurate pricing for your project, reach out to a tile contractor near you.
As of Jan 29, 2025, the average hourly pay for a Tiler in California is $23.29 an hour. While ZipRecruiter is seeing salaries as high as $33.45 and as low as $14.00, the majority of Tiler salaries currently range between $18.99 (25th percentile) to $26.35 (75th percentile) in California.
The cost of tilers depend on the difficulty of the job and the total size of the bathroom. For a small bathroom, tilers cost around $1,125 to $1,800. For a medium-sized bathroom, tilers cost from $1,275 to $2,040. For a large bathroom, tilers charge between $2,100 to $3,360.
This is simply the square footage of the space divided by the area of each tile. For example, if the square footage of the space is 120 square feet and each tile is 12 inches by 12 inches, the calculation would be 120 square feet / (12 inches x 12 inches) = 120 square feet / 144 square inches = 0.83 tiles.
The golden rule is, try as much as possible to avoid small pieces of tile, or, try to keep them hidden. The same basic idea applies to the vertical lines of your job. Try to minimise any small cuts. It is best to start with a centre line and mark along your wall where each vertical joint will occur.
In the end, whether you tile your walls or floor first is down to you and your preferences. If you're working on it yourself and have more time to spare, then tile the floor first as this makes tiling the walls easier. Just bear in mind that you must wait for the adhesive to dry before you begin working on the walls.
The reason behind the high cost of tile installation is the artistry involved. A skilled tile installer ensures that each piece not only fits perfectly but also contributes to the overall aesthetic of the space.
If you're hiring a professional, labor expenses can range from $4 to $8 per square foot. For a 12x12 room, this translates to an additional $576 to $1,152 for installation. This brings the total project cost, including materials and labor, to anywhere from $864 to $4,992.
Labor Cost by Square Foot
The average labor cost to install tile is $10 per square foot, with a total range of labor costs from $4 to $15 per square foot.
As a day rate, tilers tend to charge, on average, between £200 – £350 per day.
Check references
A reputable tradespersons should always allow a client to make contact with two or three of their recent customers so that enquiries can be made about the quality of their work and their conduct on the job. Ask the tiler for their references, whether they are qualified and their trade experience.
Tiling is a trade that has been around for hundred of years and tiled surfaces show no sign of ever going out of fashion. It is probably safe to say that there will always be a high demand for skilled tilers, meaning that prices will remain high and there's unlikely to ever be a shortage of work available.
Labor costs typically range from ₹30 to ₹50 per square foot.
Typically, the installation cost for Lowe's ceramic floor tile ranges from $5 to $10 per square foot.
To calculate the tile labor cost, multiply the area to be tiled by the rate per square foot for tiling. Then, multiply the total number of transition pieces by the cost per transition piece. Add the two results together to get the total tile labor cost.
Factors that can affect the floor tiling cost include the size of the floor, the materials used and the expertise of the tradesperson. Underfloor heating can be challenging to work over, so if you have this in your home, be prepared for higher tiling costs.
How many m2 should a tiler do in a day? An experienced tiler can lay around 20-30 m2 in a day. Beginners will lay around 10-15 m2 per day.