All floating floors have a tolerance for movement and certain underlayments allow a floor to move more than others. Dense underlayments like Cork allow for a bit less movement than the cheaper foam based underlayments.
Because the flooring isn't attached to the sub-floor, it can move slightly when walking over it. However this is often tiny movements, caused by the underlay compressing underfoot. A hollow or echoed sound can sometimes occur when walking over a floating floor.
When floating hardwood flooring options are installed they are put down so there is only a very slight gap around the edges of the room to allow for expansion and contraction. So there is very little space for this very heavy wooden surface to move around and friction prevents much motion from occurring at all.
Yes, you can put heavy furniture on laminate flooring, but it's important to take certain precautions to prevent damage to the flooring.
What are the problems with floating floors? Floating floors can be susceptible to moisture and humidity, which can cause warping or buckling. They also tend to be more prone to gaps between planks due to their lack of attachment.
Hands down, floating floors command lower resale value than other traditional nailed down floors. Floating floors cannot be sanded and refurbished like solid floors. Extreme and frequent changes in moisture and temperature can cause the flooring to expand and contract and, finally, over time, can damage the floor.
But, it can also be one of the big disadvantages of floating floors if you live somewhere that experiences extremely high humidity. This is also due to the space between the floor and subfloor. If a lot of moisture accumulates in there, it may contribute to warping, pitting, or mold growth.
Any new laminate floor product, including Swiss Krono, needs to sit in your house for at least 48 hours in the room it will be installed in order to acclimate or to become accustomed to a new climate or conditions.
Floating systems are a flooring type that clicks together and doesn't require adhesive. Fortunately, with this type of flooring, there's no waiting period. Once the floors are installed, you can place your furniture immediately.
The quickest way to get new wood underfoot is to install a floating floor. Unlike traditional solid-wood strips, a floating floor isn't nailed down. Instead, the planks are either glued or snapped together. The planks go down fast, over virtually any material—concrete, plywood, sheet vinyl, even ceramic tile.
Floating floors are not designed to hold the extra weight of cabinets, and over time they can damage the floor and cause more issues in the long run. Therefore, we recommend that you install the cabinets before the floating floor.
The feeling of bounce is caused by the flooring moving downward when weight is applied (stepped on). The flooring moves or bounces as it is not properly supported from underneath which puts added pressure on the flooring joints, in most cases causing them to separate, break or squeak.
Squishy or spongy flooring can sometimes be a sign of water damage, either to the boards themselves or the subfloor. This is often caused by using too much water on the laminate to clean it, such as using a sopping wet mop or steam mop, which damages the wooden core of the laminate boards.
An expansion gap is essential when it comes to laminate flooring installation. The recommended expansion gap is a minimum of ¼ inch. Expert installers say that the larger the space, the larger the expansion gap should be, as the floor needs more space to expand and contract with temperature.
One of the most common reasons why laminate flooring develops space between floorboards is temperature. A rise in temperature leads to expansion, while a decrease in temperature leads to contraction.
Weight is the biggest concern for floating floors and the appliances you can put on them. With direct pressure on the flooring joints, buckling may occur due to blocking of the expansion and contraction spaces. Hence, it is advisable to stick to items below 500 pounds for your flooring.
Usually nailing is the cheapest method but the subfloor is limited to wood. The floating method is affordable because it does not require too much labour, materials or time to be executed. Glueing is the most expensive and the rate is determined based on the glue type and the total square footage.
You should install your floating floor after your kitchen units have been installed. It is extremely important to have your kitchen installed prior to laying your Brecon floor so that your Brecon floor can adapt to varying seasons and temperatures without the additional restriction of your kitchen on the top of it.
Buckling & Warping
Excessive moisture in the subfloor often causes the floor wood to buckle and warp. Even high humidity in the air can cause the same. For this reason, it is essential not to wet mop a floating floor. The primary key to this is prevention.
Yes, you definitely need underlayment when installing laminate flooring on concrete (or any other surface, for that matter). Laminate is a “floating floor” which means that it is not nailed or glued to the surface.