To dose water in a tank with 5 mg/L chlorine use: 40 millilitres of liquid pool chlorine or 170 millilitres of bleach, for every 1000 litres in the tank. Always test the residual chlorine level with a chlorine test strip.
For every person who uses the pool each day, you will require a further 10 grams of chlorine. Example – A 50,000 litre pool will require up to 200 grams of chlorine and if 5 people use the pool a further 50 grams of chlorine is required = total of 250 grams per day.
The most important factor though is the size of the pool. You'll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.
56% - You will need 19g by weight or 19ml by volume of cal-hypo 56% to raise your pool chlorine levels by 1PPM per 10,000 liters of water. 65% - You will need 16g by weight or 15ml by volume of cal-hypo 65% to raise your pool chlorine levels by 1PPM per 10,000 liters of water.
To disinfect water, add one part of the chlorine solution to each 100 parts of water you are treating. This is about the same as adding 1 pint (16 ounces) of the chlorine solution to 12.5 gallons of water.
Chlorine levels up to 4 milligrams per liter (mg/L or 4 parts per million (ppm)) are considered safe in drinking water . At this level, harmful health effects are unlikely to occur.
The addition of chlorine will depend upon usage and bathing habits. It could be daily or every 2-3 days (for 1mg/l add 2g per 1000 litres).
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.
Liquid chlorine may be a good choice if you have a large pool, but the costs associated with it, and the available chlorine per pound could mean that chlorine granules are the better option. In the end, both liquid chlorine and chlorine granules will do their job and keep your pool clean and clear.
Calculate: 1 bag for each 10,000 gallons, per week or per month. Example: 2.5 bags per week for 20 weeks, or 50 lbs. Or 2.5 bags per month for 5 months, or 12.5 lbs. Recommendation: Get a 50 lb bucket of shock chlorine if you expect to shock weekly, or for 5 monthly shocks, you could buy the 12 Pack of pool shock.
The basic balance of chlorine to water is between 1 and 3 ppm, or 0.00013 ounces of chlorine per gallon of water.
You'll need to know how much water your pool holds in order to determine the right amount of chlorine to add. For a quick estimate, measure your pool's length and width, find the average depth, then multiply length by width by the average depth.
To use the right number of tablets, always round your pool volume up to the nearest unit of 5,000 gallons. For instance, your pool has a capacity of 20,000 gallons, you would add four chlorine tablets. But if your pool holds just 16,000 gallons, you'd still use four, three-inch chlorine tablets.
NEVER just throw them into your pool water. This will cause them to dissolve on the floor and it can damage and create a permanent bleach stain to your liner or concrete.
A pool should have a chlorine level between two and four parts per million (ppm). Make sure your above ground pool has enough by testing your water about every other day with chlorine test strips, such as these Aqua Chek Test Strips.
It Should Not Be Done Together
This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
The most common chemical used in the treatment of swimming pool water is chlorine. It not only eliminates bacteria and algae by disinfecting (killing) action, it also oxidizes (chemically destroys) other materials such as dirt and chloramines.
Like water in any other swimming pool, a Bestway pool's water has to be consistently sanitized. For chemical water disinfection, you can use either chlorine or bromine in a Bestway aboveground pool. Maintain Bestway aboveground pool chlorine levels at 1 to 3 parts per million (ppm) or bromine levels at 2 to 4 ppm.