One of the best-known ways to unlock a deadbolt without a key is by using two bobby pins. Start by inserting the closed "looped" side of one bobby pin into the bottom portion of the lock. Use the second bobby pin, broken in half, toward the top of the lock and move it back and forth.
To unlock a privacy lock you'll need a flathead screwdriver that is small enough to fit into the hole on the doorknob. Insert your screwdriver into the hole and push forward. If your doorknob is using a push-button type privacy lock, then you should hear a loud click and the door will open.
Take a small hammer to the body surrounding the keyhole. Twist the key back and forth as you tap on the lock with your hammer. This might take a while as it'll take the parts time to fall back into place and work to open the lock.
Unfortunately, you can not unlock a deadbolt with a credit card. Credit cards will only work with slanted-latch-style locks. Furthermore, the slant of the latch must be facing you so that you may press it in using your card.
Start by pulling the bobby pin apart and roughly straightening it as such. Next, stick the straight end of the hairpin about one centimeter, or about 1/3 of an inch, into the keyhole of your lock and apply enough pressure to bend the end of the pin into a hook. The result should look something similar to this.
Generally speaking, deadbolts are sturdy locks that can withstand kick in and other forced entry attempts. However, a door with a deadbolt can still be kicked down if the door itself is not solid. So, to protect your door against kick in, you want to make sure both the lock and door are of high-quality grade.
Picking a Locked Bathroom or Bedroom Door Lock
Most interior locksets have a pinhole on the outside knob for emergencies. All you need to pick one of these locks is a single straightened-out paper clip to substitute for the pinhole door knob key. Insert the paper clip into the pinhole and push on it to unlock the door.
Ideal choices include a small screwdriver or hex wrench, a hair pin, or a heavy-duty paperclip. You can even use a bamboo skewer from the kitchen, or a cotton swab with the fluff removed from one end. If using a hair pin or paper clip, first bend it open so you have a long, straight bit of metal.
A minimum of 10, 75-pound strikes are reported to be the equivalent of over 100 foot pounds, which is why the Grade 1 deadbolt locks have been tested. A really strong criminal would have to kick your door over 100 times in order for it to begin to degrade or show signs of weakness.
Well, deadlocks and deadbolts are the same in that they both need a key to lock. However, while a deadlock can only be unlocked in deadlock mode with a key, deadbolts can be locked and unlocked with a key and have a metal lock that extends from the door into the wall.
The best way to reinforce your frame is by adding a layer of steel to prevent them from splitting. This makes your door kick proof. Installation entails placing high-gauge steel over the door jamb and securing it with long screws. The screws should penetrate through to the wall studs on all sides of the doorway.
Deadbolt and lock all of the exterior doors to the home. Since deadbolts are one of the best ways to secure your home, you will have the peace of mind you need when leaving home. A burglar will not be able to break through a deadbolt with a crowbar or pick them open, which ensures the safety and security of your home.
In the U.S., there is no single comprehensive law against dual-cylinder deadbolts. Individual cities and states have local property and fire codes that may prohibit the use of dual-cylinder deadbolts. The code may prohibit the use of dual-cylinder deadbolts in some buildings and allow them in others.
Mortice Deadlocks
A mortice deadlock is designed to be fitted into the timber edge of a door and allows the door to be manually locked from both sides with a key. A deadlock is a lock bolt only and does not have a latch/catch section for the operation of a door knob/handle.
If the door or frame are made of wood or a hollow-core material, you should be able to kick it down with minimal force. Exterior doors are usually made of solid-core material, such as chipped or shaved wood and laminate, and are harder to kick down.
The BHMA/ANSI has three, separate grades for deadbolts, simply labeled grades 1 through 3. Grade 1 is the highest quality, and the most dependable deadbolt you can have. Grade 3 is your average deadbolt which will provide an accepted, but minimal, level of security.