Clean your Air Filters, Vents, and Ducts – A clogged air filter will struggle to meet the thermostat's set temperature since the dirt and debris buildup prevents air from circulating through the vents. And as airflow into living spaces drops, so do comfort levels.
One possible reason your AC is not reaching the set temperature is that the thermostat could be dirty. If dirt, dust, or other debris has accumulated within the thermostat box, it can cause the wires to heat up or other issues. Thermostats are cleaned during routine HVAC maintenance to help prevent this from happening.
Dirty or worn flame sensors, blower motor problems, clogs in the condensate lines, and electrical issues are some of the many problems that can leave your HVAC system failing to deliver the temperatures you've programmed in your thermostat.
That usually means that the thermostat sensor is faulty. You have two options. Change the thermostat, or simply ask for a higher temperature. So press the up arrow a few times to change the 74 to 78 and you should feel warmer.
Check the wire connections between the AC unit and thermostat, especially if your AC is not responding to thermostat adjustments. Damaged or loose cables can interfere with communication between these devices.
A bad thermostat can be detected when your AC or furnace is not turning on, your HVAC systems are not turning off, the thermostat not responding, your HVAC system is short-cycling, the room temperature not matching the temperature displayed on the thermostat, and the programmed setting resetting themselves.
There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.
Some of the most common thermostat issues include:
The thermostat is broken, not properly level, or dusty. The thermostat needs to be recalibrated. There is loose wiring causing a thermostat issue.
For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.
Clean your Air Filters, Vents, and Ducts – A clogged air filter will struggle to meet the thermostat's set temperature since the dirt and debris buildup prevents air from circulating through the vents. And as airflow into living spaces drops, so do comfort levels.
Any time you are having an issue with heating and cooling units, such as after a sudden power failure or after your children have had 'control' of the system while you've been away, resetting the thermostat should be the first thing you try when attempting to rectify HVAC system issues.
A struggling AC unit could point to dirty, malfunctioning, or even broken parts. For example, dirty filters restrict airflow, while a broken condenser coil or air leaks can result in total system malfunctions.
Another problem that can cause your house to be hotter than what you've set the thermostat to is if your home's HVAC system isn't sized properly. An HVAC system that's too large for your house will cool your home unevenly. It will only cool some rooms off and then shut off versus cooling down the entire house.
Your AC might not cool properly due to thermostat issues, an undersized unit, or extremely high outdoor temps—so check those first. Keep an eye on airflow—replace clogged filters every 3 months, and make sure vents and ducts aren't blocked for efficient cooling.
Yes it is normal. It has to do with the "swing" or differential on your thermostat. This is the amount the thermostat allows the temperature to rise above your setpoint (or fall below setpoint for heat) before the system comes on again.
A common oversight for a thermostat showing the wrong temperature is the state of its batteries. Dead or low-power batteries can lead to inaccurate readings. Simply replacing the batteries might restore your thermostat's accuracy and functionality.
Cooling a house from 80 to 72 degrees is a common goal for many, especially during the peak of summer. On average, this process takes roughly two and a half to three and a half hours.
Just because the outdoor temperature is above 100, the Ideal temperature to set your AC unit to doesn't change — it's 78 degrees. Higher temperatures in the home are to be expected when the weather is hotter than usual, but your thermostat can still be set the same as if it were a lower temperature outside.
On average, an air conditioner running in good condition should take about 15-20 minutes to drop the temperature by 1 degree in a standard-sized room. However, factors like outside temperature, unit size, and insulation quality can affect this timing.
Your Vents Are Blocked
Your thermostat will not be able to reach your desired temperature if you have something blocking the vents. Check the vents around your home and make sure you do not have any items such as furniture in the way of your vent's airflow. While you're at it, make sure all of your vents are open.
Yes, you should turn off your AC if it's not cooling.
Most modern thermostats will have a clearly marked reset button inside the panel. It's usually small and recessed, so you might need a pointed object like a paperclip to press it. For those wondering specifically how to reset air conditioner thermostat models, the process is generally the same.
Insufficient Insulation and Air Leaks
If you have gaps on the sides of your windows and doors, cold air might be leaking out, and hot air might be seeping in. A lack of insulation in your attic and throughout your home can also cause cold air to leave your home quickly.