Then pull up sharply to disturb the clog and loosen it. Continue vigorously pushing and pulling until the water begins to drain. It may take 15 to 20 cycles before the toilet unclogs. Be patient.
It's often our first instinct, but repeated, frantic flushing will probably only flood your toilet. There are a number of methods you can try on your own (with or without a plunger) to fix toilet clogs that won't require a plumber.
You should never flush a clogged toilet more than once. Instead, take the lid off the back of the toilet and close the flapper. This will prevent any more water from running into the toilet bowl while you're working.
When the water is extremely hot, but not boiling, pour into the toilet carefully. Wait for 10-15 minutes while the dish soap and hot water soften the clog. Once you do so, the toilet will unclog and flush freely.
Force Airflow
Larger bottles or two-liter soda bottles work well because they hold a larger air capacity and are wide enough to plug the drain hole. Insert the bottle upside down into the drain of the blocked toilet and squeeze firmly and fast. The air will force into the pipes and disrupt the clog.
You may just be using it incorrectly. Do this: Next time you have a clog, use your plunger like this: Ensure the flange lip is unfolded. Get a good seal on the toilet drain (that is, make sure you're covering the entire drain or you won't have enough pressure to loosen the clog.)
Caustic soda is a nasty chemical that can burn, but it's very effective for unclogging toilets. To use this chemical, you need to get some rubber gloves and eye protection. You can pick the chemical from the local hardware or grocery stores. Pour a ¾ gallon of cold water into a bucket, and add 3 cups of caustic soda.
You might want to see if the clog works itself out in time. If you have another toilet you can use, let the clogged one set overnight. The water pressure that builds up in the bowl might actually cause the toilet to unclog itself. After a day's wait, flush the toilet again.
How to Tell if Your Toilet is Clogged. Signs that your toilet (or sewer line) is blocked include: The water does not flush properly, stays in the bowl for long periods or ends up overflowing over the top of the bowl. When the toilet is flushed, water starts to gurgle up in your shower or bathtub drain.
Maybe. If your toilet is constantly clogging, the problem could be the toilet itself or it could be something else entirely (like a sewer or septic line problem). So before you rush off to purchase a new porcelain throne, make sure the toilet is really the problem...
Attempting to force a clog through a toilet with a plunger can often make the problem worse. Instead, create a seal and slowly push down on the plunger before pulling it back sharply. The suction can help pull the clog back up toward the bowl, breaking the blockage and allowing gravity to take over.
Using too much toilet paper
This is probably the most common reason toilets get clogged — and often the easiest to deal with. If we're honest, most of us are probably guilty of this one. If you're one of the many people who use a lot of toilet paper when you use the bathroom, here are a few tips!
Toilets can develop drain clogs for any one of several basic reasons, usually involving partial or complete obstruction in one of the various parts of the drain system: the toilet trap, the branch drain line, the vent pipe, or the main sewer line.
When you are using a baking soda and vinegar solution to clean out your drain, you are actually causing the rubber and plastic that are used for the drain's pipes to be eaten away by the mixture. Over time, this rubber and plastic will break down, causing the drain to become even more blocked.
Baking Soda & Vinegar
The combination of baking soda and vinegar is an excellent way to dissolve clogs. For toilet clogs especially, add one cup of baking soda to the bowl and let it sit for a few minutes. After that, slowly pour in two cups of vinegar. Let the mixture sit again for an hour, then flush down the toilet.
Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.
Check water level in toilet bowl
Listen for a gurgling sound from the drain (a good sign) and check the water level in the toilet bowl. If nearly all the water drained from the bowl, then you've probably cleared the clog.
Toilets can develop drain clogs for any one of several basic reasons, usually involving partial or complete obstruction in one of the various parts of the drain system: the toilet trap, the branch drain line, the vent pipe, or the main sewer line.
Sometimes clogs cause a toilet to slowly drain its bowl. You cannot plunge a toilet that is empty, so if there is no standing water, use a cup to fill the toilet with water from your sink. If the toilet is empty, take the opportunity to use hot (but not boiling) water, as high temperatures can help clear clogs.