Instead, there should be at least one return vent in every room, with two or three being ideal. If your house has only one return vent, this is not a problem — make sure to keep the doors open in every room so the air can circulate properly. Make sure there are no furniture, draperies, rugs, etc. blocking return vents.
Does Every Room Need Air Return Grilles? While it is a myth that air return grilles are required in each and every room in the house, it is definitely necessary to have more than one of these grilles installed at strategic places in the house. The most important place to have these would be the bedroom.
One per room is ideal, but placing two or three in central locations can provide enough air circulation to maximize the energy efficiency of your HVAC and optimize indoor air quality, so your family stays healthy. If your home has multiple stories, you should have at least one return air vent per floor.
However, most HVAC contractors use a rule of thumb to determine the number of air vents needed. For example, for a standard residential HVAC unit, you'll generally need one supply vent and one return vent for every 100 to 150 square feet of living space.
Can You Have Too Much Return Air? Too much return air coming through your system isn't much of an issue because the fans and ductwork working to get that air back into the system only pull with so much force to make the HVAC system work correctly.
Symptoms include weak airflow and uneven cooling or heating throughout your home, with some rooms feeling much cooler or warmer than others. Homeowners should regularly check vents for consistent airflow. If you notice a significant drop in air pressure or uneven temperatures, it could indicate return air issues.
1. Openings shall not be located less than 10 feet (3048 mm) measured in any direction from an open combustion chamber or draft hood of another appliance located in the same room or space. 2. Return air shall not be taken from a hazardous or insanitary location or a refrigeration room as defined in this code.
Guess where that air goes, that's being sucked into the Return Air vent. It goes back to the air handler, into a large plenum (box), mixed and joined with the Return Air from the other rooms. Blending the air together helps eliminate the hot/cold rooms and zones in your house.
A general guideline is homeowners need one square foot of roof vent for every 300 square feet of ceiling space, if your home has a roof with a vapor barrier, or 1:300. If not, you should have one square foot of roof vent for every 150 square feet, or 1:150.
Maintenance Needs
Return vent filters, if used, also need regular replacement to avoid airflow issues. By properly maintaining both types of filters, you can get great airflow, reduce strain on your HVAC system, and rest easy knowing you have cleaner air.
What room should return air ducts not be installed? Return air ducts should generally not be installed in rooms with high humidity or areas prone to moisture accumulation, such as bathrooms or kitchens.
Having two air return vents allows you to seasonally control which air is returning to the HVAC system. In older homes, this may not be an option. The theory is that in the Summer cooling season, you want to be circulating warmer air back through the HVAC system to be cooled.
By installing more return vents throughout your home, they can trap the air and remove it, improving air circulation. A drawback with this method is that your ductwork needs enough space to support additional vents. Smaller homes that can't add more vents need to pursue other options.
Having a number of return vents (preferably one in every room, but also 2 or three is far better than just one) creates regular air pressure. If you have one return vent, your house is great. Maintain the doors to every room open so air can properly flow.
If there's not enough return air, your living room can be 10℉+ warmer or cooler than, for example, the bedrooms. Not enough return air in summer can cause rooms close to the central unit to be cooler and those farther from it to be warmer. In winter, rooms farther from the furnace can be too cool.
Return registers can be large and centrally located in your home, or they can be in every room. HVAC professionals recommend that each room have a cold air return vent to help with flow and temperature control. These vents are typically found on an interior wall.
The short answer is no, you can't install too many soffit vents. The air is cleaner and there is a nice breeze when the house is properly ventilated. This same practice applies to soffit vents, and it's much better to overventilate than to have air sit in the attic without movement.
Generally, the square footage of each room will determine the number of vents you need per room, because the influence of one vent will be altered when the room is larger than a certain square footage. That magic number is 100 square feet.
1/150 is the most recommended. That means 1sq. ft of vent area per 150sq. ft of attic area.
Adding a return air vent will cost homeowners $350 per vent on average, depending on the vent size and duct material. A professional can assess the right duct material you need for your home and can give you an accurate estimate.
Today, it is recommended to have one or multiple air vents in each room of your home or business to optimize air flow and reduce the cost of energy spent on cooling your home or office.
The earliest HVAC systems featured a large, single return vent placed somewhere in the middle of the home, but this is not the most effective system. Instead, there should be at least one return vent in every room, with two or three being ideal.
If they are too small, airflow will be restricted and there will not be enough air circulation to heat or cool the inside of your home. Return air ducts must be sealed and unobstructed — Sealing return air ducts is just as important as sealing supply ducts.
Generally, if you are using a Duct Sizing Chart or calculator (such as the Trane Ductulator), size the re- turn ducts for 0.05 inches/100 ft (0.40 Pa/m) based on the expected airflow through that return air duct. The total sum of air from all the returns should be at least 250 CFM/nominal ton (33 l/s per-kW).
You can add a vent to existing ductwork if your AC can handle it. This can provide comfort in rooms not served by your HVAC system. It can even improve indoor air quality and increase your home's resale value.