For a standard 5-pin Kwikset lock, there are about 6,200 practically usable key combinations. While the theoretical mathematical limit is around 7,776, certain physical and security restrictions (such as avoiding drastic cut depths next to each other) reduce the actual total.
each pin in a Kwikset has six depths, the first pin can have six depths, the second pin six depths, etc, so it is 6 to the power of 5 or 7776 theoretical unique keys.
Bump Proof, Pick Resistant and Re-key Technology
SmartKey Security provides superior protection against break-in techniques because of its patented technology that isn't found in traditional pin-and-tumbler locks.
The factory-default master code for all Kwikset electronic locks is 0-0-0-0.
In commercial systems it's more like 8 to the 6th power for a total of 262144 possible combinations. This allows 10 total depths and a maximum difference between cuts of 8. There will be a few unacceptable combinations in a mechanical or security sense. How long have you been a Locksmith?
Cracking a 4-digit combination lock by purely guessing every number can take anywhere from a few seconds to 2.5 hours depending on your method and luck. However, by using a simple tension technique, you can decode many locks in under 5 minutes without any guessing.
Hold the button continuously for 30 seconds until you hear a beeping sound and see the status LED flashing red. Press the program button once again until you see the status LED flashing green and hear two beeping sounds. The Kwikset smart lock has now been reset and is ready to be set up again.
There is no single "master key" that opens all standard Kwikset locks right out of the box. However, Kwikset locks can be mechanically master-keyed by a locksmith or the factory. This means a specific master key can open an entire set of locks, while individual units still have their own unique keys.
How to Decode a Kwikset Smart Key Cylinder With the Cube
Schlage is generally considered more secure than Kwikset, offering superior protection against forced entry and picking. Schlage locks often feature ANSI Grade 1 ratings, thicker metal, and drill-resistant components, while Kwikset focuses on convenience and affordability (often Grade 2). For maximum home security, Schlage is the preferred choice, whereas Kwikset is often chosen for residential turnover and easy rekeying.
Police typically recommend using high-quality deadbolt locks, specifically ANSI Grade 1 or Grade 2 deadbolts, for exterior doors.
Due to the extremely low price of the key pins in the locks, rekeying is almost always much cheaper than getting your locks changed. When rekeying your locks, you are only being charged for the labor, whereas when you get your locks changed, you're paying both for labor and parts.
The basic types of keys include primary keys, foreign keys, candidate keys, super keys, alternate keys, composite keys, unique keys, and secondary keys. Each key has a specific function for data relationships and data integrity.
Kwikset 3 step re-keying process
First insert and turn the functioning key, then insert and remove the provided learning tool then remove the original key and after inserting the new key in turning back to center, the Smartkey lock has been rekey and is fully functional, that's it.
The Kwikset KW1 key blank is the most widely used Kwikset key blank for standard residential Kwikset locks. It supports traditional pin-tumbler cylinders and is commonly used for homes, rental properties, and small businesses.
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own.
How many times can I re-key my lock? Unlimited amount of times. All you need is the Smarkey Security tool.
A Kwikset SmartKey is a patented re-keyable lock cylinder found in many of Kwikset's residential door knobs, levers, and deadbolts. It allows homeowners or landlords to quickly change the lock's keying themselves in seconds, without needing to replace the hardware or hire a locksmith.
The default Programming or Master Code for most Kwikset electronic locks is 0-0-0-0. If your specific model uses a default User Code instead, it is typically 1-2-3-4.
The master code is a factory preset code or default code that comes with the lock. To locate the master code, look for a yellow sticker in the instruction manual. If it's not there, open the lock's faceplate and check the inside panel.
Answer: Yes, it is possible to reset your Kwikset lock code without removing it from the door. The reset button is typically located on the interior side of the lock, behind the faceplate. You can use a small screwdriver or paperclip to press the reset button and initiate the code reset process.
The rarest (least used) 4-digit code is 8068. In extensive cybersecurity analyses of leaked databases, it appeared at a rate of just 0.000744%.
For beginners or those seeking the easiest, most foolproof method, a Lishi tool is the easiest pick tool available.
There are only 24: