Rain Bird lawn spray heads usually emit over 1 inch per hour.
Rain Bird High Performance Sprinklers are built rugged to withstand the harsh conditions in agricultural applications. With flow rates ranging from 0.28 to 6.82 gpm (62 to 1,549 l/h), these sprinklers deliver precise, uniform and unrivaled water distribution.
For conventional sprayheads, precipitation rates typically range from 1.3 inches to 2 inches per hour. For gear drive rotors, precipitation rates typically range from 0.4 inch to 1 inch per hour. For rotary nozzles, precipitation rates typically range from 0.4 inch to 0.6 inch per hour.
Fixed spray heads apply 1.5 to 2 inches of water per hour in a fan-shaped spray. Rotors apply about 0.5 inches of water per hour in a single, rotating stream of water. Rotary nozzles apply approximately 0.4-0.6 inches per hour in multiple, rotating streams of water.
The average usage of water in a residential sprinkler system is between 12 – 30 gallons per minute depending on the type and size of the sprinkler head.
However, the flow rate of the Rain Bird PRS spray held steady at 2.1 gallons per minute, saving almost a gallon per minute over the non-PRS spray.
Measure your home's water capacity (flow):
The flow rate in gallons per minute (GPM) is: 300 (which is 5 gallons X 60 seconds in a minute) divided by the number of seconds it takes to fill the container.
Nothing should be in that area between the bottom of the sprinkler heads and the imaginary horizontal plane parallel to the ceiling that is 18 inches below. This is done to allow an even and unobstructed spray pattern from the sprinklers when triggered to extinguish the fire.
The answer is that it usually takes up to 30 minutes to get a half inch of water. Watering 3 times per week equals to an inch of water on a lawn. Plants can be watered 1 to 2 times a week in seasons where there is a higher chance of rainfall and less evaporation.
The average system uses approximately 15-16 gallons per minute, per station.
A watering session should be long enough to soak the area sufficiently so all the roots receive a beneficial drink. Sprinklers should be set to run for about 30 to 35 minutes at a time twice a week. Your goal is at least 1″ of water a week for your lawn.
Generally, spray heads use about 0.75 gpm for ¼-circle, 1.5 gpm for ½ circle, and 3.0 gpm for full-circle heads. "Rotor" style heads use 2 to 5 gpm each, for most residential applications.
What is the average flow rate? The standard sprinkler flow rates, in general, are from 4 gallons per minute (gpm) from a 5/32-inch nozzle at 30 pounds pressures to over 11 gpm from a 7/32-inch nozzle at 70 pounds pressures.
Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi.
To determine how long you need to water to get one inch, place a plastic container in your yard and set a timer. On average, it will take 30 minutes to get a half inch of water. So, 20 minutes, three times per week will give a lawn about an inch of water. This formula works best with healthy, well-cultivated soil.
Sprinklers generally cover up wider ground and spread out water at a slow yet steady pace, which makes all the soil moisturized evenly and soaked underground. A watering hose takes time to cover space and can clutter the soil if there's too much water.
1.3 lays out the “Three Times Rule” which states that unless specific requirements are met that “sprinklers shall be positioned away from obstructions a minimum distance of three times the maximum dimensions of the obstruction”, up to a maximum of 24 inches (0.6096 m) though the “maximum clear distance does not apply ...
A common rule that is followed for obstructions within 18 inches of the sprinkler deflector is the “three times rule”. This requires sprinklers to be positioned away from obstructions a minimum or three times the maximum dimension of the obstruction.
You can operate 2 or 3 sprinklers at one time with 'Y's and extra hoses, depending on your water pressure. To run more than one sprinkler off the same faucet, attach a 'Y' to your faucet and run a hose to each sprinkler.
Typically, though, a sprinkler system zone will boast 5 to 6 rotor heads and/or 8 to 10 spray heads.