In new construction, the wall should be furred out so that the water closet centerline is within the required 16″ to 18″ distance from the side wall.
The correct measurements for a toilet is at least 21 inches in the front of the toilet, 15 inches on the sides, and at least 30 inches from anything else in the bathroom.
The recommended minimum distance from the toilet's center line to the nearest side wall, partition, or fixture is 15 inches. The favored distance is 18 inches or more to the nearest side wall, partition, or fixture. If you need to save room, pushing the toilet side space to a bare minimum is often helpful.
For toilets, aim for a span of 900mm (800mm minimum) side-to-side and 700mm in front. And baths? You'll want similar clearances to make it easy to hop in and clean it.
Standard toilet clearance requirements state that toilets must be installed: At least 15 inches to any partition or side wall (measured from its center). 30 inches minimum away from any adjacent fixture (measured center to center). At least 21 inches clearance from a wall, fixture or door.
The IBC specifies minimum space requirements for different types of toilets. According to the IBC, the minimum clear floor space in front of a toilet should measure at least 21 inches wide and 24 inches deep.
Toilet Spacing and Design
Toilet front clearance: Bathroom building code or design practices recommend that toilets need at least 21 inches of clearance in front of the toilet. Opting for 30 inches of room provides a more comfortable space.
Standard Toilet Placement
The average distance between the toilet and the wall is 15 inches on either side. And the measurement for this would be taken from the toilet's centerline.
The minimum distance needed between a toilet and a vanity is 15 inches. The recommended distance for comfort is 18 inches or more. Aim for at least 21 inches of clearance in front of your toilet. Space double sinks in the vanity at least 30 inches apart.
Generally, building regulations state that the minimum size for a loo is to be 700mm wide and 1300mm long. However, that can be uncomfortable if you have large family members, or expect guests who are pleasantly plump to be using your loo.
Toilets can fit into spaces as small as 30 inches (76 centimeters) wide and 54 inches (137 centimeters) long, but at least 36 inches wide and 60 inches deep is much more comfortable.
Our best overall pick, the Toto Drake Cotton Elongated Standard Height Toilet, is made with vitreous china. We recommend our best budget pick, the Swiss Madison St. Tropez Elongated Vortex Toilet, for a porcelain option.
Traditional toilets are 15 inches high. Comfort height toilets (or “right height” toilets) have higher seats than traditional toilets, usually between 17 inches and 19 inches. Comfort-height toilets are becoming a popular option for many households.
The standard measurement for space around the toilet is about 15 inches, and 18 inches is spacious for added comfort.
shall be permitted to include knee and toe clearance. the water closet shall be 16” minimum to 18” maximum from the side wall. Clearance around a water closet of 60” mini- mum measured perpendicular from the sidewall and 56” minimum measured perpendicular from the rear wall shall be provided.
Believe it or not, you only need a space 70cm wide and 130cm long to install a toilet – downstairs or upstairs! However, as you can imagine, this doesn't leave much room for anything else, so we recommend building one a bit bigger to make your, erm… experience more comfortable.
Toilet. Clearance: Leave at least 21" of space in front of the toilet. Placement: Leave at least 15" of space from the center of the toilet to a wall or another object. To ensure privacy, install a toilet out of direct sight – off to one side of the doorway or hidden behind the vanity.
Width of the sink is determined by how much space is available on either side of the sink. E.g., if the countertop is 22″ wide, you only have room for a 16″ sink. If the countertop is over 24″, you can install a sink that is wider (oval). Always leave 4″-6″ or more on either side.
Fixture (side to side): 15 to 18 inches clearance from wall, sink or other fixture. Fixture (front): 30 inches is recommended.
In a toilet containing only a commode and a wash basin, such as in a powder room, a 5' X 4' size is the minimum requirement. Instead of following this size, a toilet no narrower than 3' can also be designed, keeping in mind that the minimum area required for this toilet without a shower will be 20 square feet.
Toilet Rough-In Dimensions: A toilet's rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
Any plumbing professional can tell you that the standard is a 12” rough-in, and this is true for both two-piece and one-piece toilets.
The centerline of the toilet shall be 16 inches minimum to 18 inches maximum from the side wall or partition, except that the toilet shall be 17 inches minimum and 19 inches maximum from the side wall or partition in the ambulatory accessible toilet compartment specified in section 604.8.
Minimum clearance of 15" on each side of vanity. Minimum clearance of 21" in front of toilet.
make / do / go number two, Informal. to defecate: used especially by or with reference to children.