The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. Residential pool water only needs to be turned over once daily to have proper filtration.
The average pool pump runs 12 hours summer, and 6 hours winter; However, there are multiple variables that affect how much filtering your pool water needs. Filtering systems can fluctuate anywhere between 24 hrs to 6 hrs a day to keep the water clean in the swimming pool.
Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. ... One way to keep control of the time you run the swimming pool pump is to run it several times a day for short periods of time.
Run the pump for 8 hours, every 24 hours. You can also pause in between; there is no need to run it continuously. Ideally, after you shock the pool, be sure to run the pump at night and during non-peak hours, to save on your energy bills.
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period. For a residential pool the water should turn over at least once per day. So, you can feel confident if you decide to run your pool pump for 12-hours a day.
The Short, Short Version. Test Chlorine levels at least twice per week. Also make sure to test after heavy use or rainfall, as Chlorine levels have likely been depleted. Pool chlorine is responsible for sanitizing your pool and hot tub water to make it safe to swim.
Cleaners aren't meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation. When your pool pump is not running, the water is sitting stagnant in your pool allowing bacteria to survive and grow.
Run the circulation system one (1) hour for every 10°F of air temperature if a single-speed filter pump is installed. Example: If it is 100°F, the pump should run 10 hours a day minimum. Of course, if the pool is full of algae or a major weather event has occurred, the pump may need to run 24-hours a day.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Most pool filtration systems are sized to circulate and filter the water twice in 8 hours. We recommend that you run your pool pump 6-8 hours in the winter and 10-12 hours in the summer.
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
Yes you can turn your pool pump off for a week. You can turn it off for a month, but there are consequences. The pool will get dirty—no pump, no filtering. The chemicals will not circulate and the water could start turning a nice shade of green as algae forms.
If your pool equipment isn't winterized, water can freeze inside of your pump, filter or heater damaging these components so it's important to keep water flowing through your pool's system the entire time the temperature is freezing. There are things you can do to prevent costly repairs and replacement: 1.
To prevent potentially dangerous electrical issues, it's imperative that you turn off the power to your pool equipment — such as pumps, motors, filters, heaters, chlorinators, and lighting fixtures. Even if you turn off the power to your pool equipment, it can still be damaged by wind, rain, and debris.
Depending on the size of your pool, we still recommend the pump run 8-10 hours per day during the hottest summer months and at least 6 hours per day during the winter months.
Should I run my pump every day? It's optimal to run your pool pump at least once every day. It helps you get better filtration for your pool water and will keep the water clean.
Run your filter pump for at least 12 hours a day, every day. This will make sure all the water in your pool circulates at least once. In an ideal world of bottomless money vaults, you could run your pool pump 24 hours a day, but 12 hours is a good compromise.
A general good rule to follow is 1 hour of filtration time for every 10 degrees of air temperature above 15 as the minimum daily run time. Hours are generally added for increased bather load, usage, animals, rainstorm or extreme heat.