On average, you should run your pool pump around 6-8 hours per day during winter and 10-12 hours per day during summer. Note that you need to run your pool pump longer during summer because algae grow more in warm temperatures.
Why is it Best to Run a Pool Filter Pool During the Day? Running your pool pump and filter during the day is ideal because this is when your pool is most prone to algae bloom, contaminants and chlorine loss. When the sun is out, the UV rays from the sun burn up the chlorine inside your pool.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.
You cannot run your pool pump every other day because the standing water can pose a health risk as it can quickly accumulate bacteria and fungi. It is crucial to run the pump every day for 8 hours (in one or multiple sessions), so the entirety of the pool's contents run through the filter once.
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
Low flow = poor circulation which will lead to algae in the pool. Bottom line, the filter must be backwashed on a regular basis to ensure that your pool water is clear. "When do we need to backwash?" - It is recommended to backwash your filter once every 4-6 weeks of regular use.
A pump does not need to run 24/7 to keep your pool water pristine. If properly sized, a pump should spin through your water in a fraction of the time, allowing it to be dormant for the rest of the day.
Rainfall dilutes pool chemistry levels and lowers the readings for pH, alkalinity, hardness, stabilizer, and chlorine. Rainfall does not contain chlorine. As well, rainfall brings with it small amounts of contaminants that are washed into the pool.
You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.
If you have a typical rainfall, or even several inches, your pool should be fine, since drains and skimmers are designed to remove the excess water. In most cases, your pool can even handle rain from most tropical depressions and hurricanes.
The most common reason pool water turns green is due to algae growing in the water. Algae can grow rapidly, particularly in hot weather, which is why it can surprise you overnight during the warmer months. This generally comes down to an imbalance or lack of chlorine in the water.
We recommend it, yes. A pool cover does much more than just cover your pool in the winter. It can keep heat in your pool, keep leaves out of the pool, and save your chemicals and water from evaporating.
With saltwater, we expect this pool to last just two summers before the salt rusts the frame.
Covers prevent evaporation
When the sun and your pool meet during the summer, this means that your pool water will disappear at a greater rate. Having patrons in the water during the day may reduce this effect, but an uncovered pool will still lose water during the night.
The Department of Environmental Health recommends avoiding activities such as swimming, surfing, and diving for 72 hours after it rains. Research has shown that the risk of infection is the highest during and the day after rain, and declines to around normal levels after three days.
Give your pool a good shock treatment 1 to 2 days before the storm hits. You can bring the chlorine level up pretty high to prolong the pool being depleted of chlorine.
If the pool is still very cloudy or green, you may need to shock it to make it safe to swim in again. First, make sure that the filter system is working properly and the chemicals are still at the proper levels. Next, mix up your chlorine shock (hyperchlorinate) treatment.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.