The rule of thumb for pool maintenance is to run your pump for eight hours per day.
Regular Maintenance will often be once a week, unless you are a pool owner with heavy usage. Getting on a weekly cleaning routine will make vacuumings faster and help keep algae from sporing.
You should allow the vacuum to run until it has cleaned the entire pool, including the bottom and the sides. This averages between two and six hours. The better your pool has been maintained -- for example, if you vacuum every week -- the less time it takes.
Cleaners aren't meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
If you want to keep the pool clean, you can run the 280 for as long as you want, but it will wear out quicker if you run it a lot. It takes about 3 hours to clean a standard pool.
Ideally, you need to run your robot pool cleaner daily or at least once a day if you're always swimming in it. But if you don't swim in it as much, run it at least once weekly or every two weeks. When you're using a swimming pool cover all the time, you may wash your pool monthly.
You can swim while your bot cleans the pool, but it's better not to. Swimming churns up the water. If the machine is in the water at the time, the current will buffet it, making it harder for it to complete its work. It'll have to work harder to cover the same ground.
With proper maintenance, your pressure pool cleaner can last you between five and seven years.
In general, it's a good idea to vacuum your pool once a week. You should also vacuum your swimming pool any time you notice large amounts of debris, dirt, or leaves on the floor of the pool (for example, your pool may need vacuuming after a heavy storm).
All pools both above ground and in-ground need to be vacuumed. Theoretically you can abandon all vacuuming duties, but watch your pool water look disgusting, dirty and cloudy. The process of vacuuming keeps chemicals working their best and increases the desire and appeal, especially on a hot summer day.
Brushing thoroughly 1-2 times per week will prevent these materials from having the time to create a stain. Brush to Prevent Algae: Every pool can grow algae, but plaster, quartz, and aggregate finishes are more susceptible.
Low flow = poor circulation which will lead to algae in the pool. Bottom line, the filter must be backwashed on a regular basis to ensure that your pool water is clear. "When do we need to backwash?" - It is recommended to backwash your filter once every 4-6 weeks of regular use.
Remember: vacuuming your pool regularly will help keep your pH balanced easier and more controlled. Skim your pool for debris, such as leaves, bugs, etc. and be sure to check your skimmer and empty that regularly as well.
Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
SHUT DOWN - After about 3 hours of operation, the Cleaner will shut down automatically as indicated by the 4 LEDs turning off. The Cleaner can remain in the pool until you are ready to pull it out. Many people run the cleaner at night and take it out in the morning.
Generally, you can expect at least 5 years' service from your quality robotic pool cleaner. The more expensive units are generally better quality – you do get what you pay for. If you keep your robotic pool cleaner in good condition, there is no reason it shouldn't last much longer.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
If you have a lot of swimming in your pool, you can use the robotic pool cleaner every other day or once a day. If you don't swim a lot, you should only run the pool once every two weeks.
run the 280 for as long as it keeps the pool clean, this could be 1 hour per day to 6 hours per day depending on the amount of debris is in the pool, but remember the 280 has gears and cogs so the more you run it the quicker it will wear out. On average it should take about 3 hours to clean a standard size pool.
As a rule of thumb, we tell people to run their pumps at least 10-14 hrs per day during the summer, and cut the time in half during the cold times of the year (if the pool pump is not winterzed). If the temperature is below freezing, the pump should run 24/7 if not winterized.
Your first issue is to resolve the problem of the cleaner getting stuck or going in circles. This is most likely caused when pool cleaners are left in the pool 24/7. When the water is cold or cools off from a warm day, the plastic in the hose gets a memory and curls slightly.
Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.