The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
To keep your pool clean, all the water must run through your pump's filter system at least once a day. This is called turnover rate. It's simple: in order to run your pump effectively for eight hours, your pump should be able to process all of your pool water during that time.
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
On average, you should run your pool pump around 6-8 hours per day during winter and 10-12 hours per day during summer. Note that you need to run your pool pump longer during summer because algae grow more in warm temperatures.
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation.
You cannot run your pool pump every other day because the standing water can pose a health risk as it can quickly accumulate bacteria and fungi. It is crucial to run the pump every day for 8 hours (in one or multiple sessions), so the entirety of the pool's contents run through the filter once.
Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.
You should run your pool pump and filter at least once a day to ensure you get proper filtration. Whether you have an inground pool, permanent above ground pool or portable above ground pool like an Intex, Summer Waves or Best Way pool, you'll want to run your pump daily and on average for 8 hours.
As a guide to running circulation, you should aim to "turn” the full volume of pool water through the filter cartridge once per day. Typically in most splash pools, using standard equipment, this is 4 hours per day (that the pump should be turned on).
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
Variable speed pumps
Variable speed pool pumps should run longer, based upon the operating speed. Most pool owners run their variable speed pump for 12 hours per day (3-4 hours on high speed for the pool cleaning system and 8-9 hours on low speed for filtration).
The lever should be on the 'Filter' setting most of the time. This is the setting that provides normal pool filtration by pushing the water through the filter media (sand, glass beads or D.E) that then traps any dirt and debris before the water is returned to the pool.
The filtrations system can operate at low water flow with typical motor speeds around 1000 RPM or less depending on the size of your pool and how long you want to run the pump. Suction cleaners typically run at around 2200-2400 RPM.
Helpful tips to keep your pool and its equipment safe during freezing temperatures. Run your pool pump continuously when temperatures are near or below freezing. You don't need to run your heater, moving water likely will not freeze. Disconnect any aerators and lines to slides.
So if you have to leave it running for a week it shouldn't make a big dent in the electric bill. Having to spend the money on getting the pool back in shape will probably cost more than leaving it on anyway. I would make sure you fill the pool water as high as you can though since you will be gone for a week.
Depending on the size of your pool, we still recommend the pump run 8-10 hours per day during the hottest summer months and at least 6 hours per day during the winter months.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
Heat transfer efficiency is higher with higher flow rates. However, you have to look at total efficiency and cost. It may be worth the extra heat loss to run the pump at lower speeds.
Do i fill the whole thing up till filled with tablets? or do i stick one tablet in for a 10ft summer wave pool. thanks:-) Answer: One tablet is all you need.
On average, your Florida pool pump should run for about 8 to 10 hours a day.