How many gallons of paint for 2 car garage walls?

Author: Prof. Lula Cruickshank V  |  Last update: Monday, March 17, 2025

The amount of paint needed can vary based on the size of your garage and the type of paint, but typically, a 2-car garage could require around 5-6 gallons for two coats of paint.

How much to paint a 2 car garage?

Larger structures require more paint and labor. Average cost. On average, homeowners can expect to pay between $300 and $800 for a standard one-car garage (approximately 240 square feet). The cost for two-car garages typically ranges from $600 to $1,200, while larger garages may exceed $1,500.

How many coats of paint for garage walls?

Number of paint coats: You need at least one coat of paint for garage walls that have already been primed. However, if you do not use a primer, you will need at least two coats to give your color a long-lasting look.

How many gallons of paint do I need for two walls?

How Much Paint Is Needed for Walls? According to Lowe's, a gallon of primer covers about 200–300 square feet, and a gallon of paint usually covers 350–400 square feet. Start by adding up the length of all the walls to be painted, from end to end.

How many gallons of paint to paint a 2 car garage door?

A standard two-car garage door will only require about a gallon of paint. Of course, this depends on how many coats you put on (two is recommended) and the color you choose. Lighter colors may require more coats to ensure proper coverage.

How Much Paint Do You NEED? // How To Measure For Buying Paint

Do I need primer to paint garage walls?

Do You Need To Prime Garage Walls Before Painting? Normal paints are not made for drywall, which is a porous material. Therefore, if your garage walls are unpainted, you will need good surface drywall or PVA primer (polyvinyl acetate). A PVA primer seals the pores in sheetrock and creates an even coat.

How many square feet is a 2-car garage?

WHAT ARE THE AVERAGE 2-CAR GARAGE DIMENSIONS? Overall, the average two-car garage dimensions are 24×24 feet (576 sq ft) or 24×30 feet (720 sq ft).

How many square feet does 5 gallons of paint cover 2 coats?

Q: How many square feet does a 5-gallon bucket of paint cover? A: A 5-gallon bucket of paint can cover up to 2000 square feet of space.

Do you need primer to paint over paint?

You probably don't need a primer. If the current wall is smooth, clean and covered with the same type of paint (both are oil-based for example), you can head straight for the paint. You need to fill holes, spackle and sand*, maybe even cut a new piece of drywall in to the existing wall.

Is 1 gallon of paint enough for 2 coats?

On average, you can get about 400 square feet out of one gallon of paint. For an easy perspective, one gallon would likely cover a bathroom or small bedroom. But keep in mind that most rooms require more than one coat of paint. So if your room needs 2 coats, plan on getting around 200 square feet out of a gallon.

What paint is best for garage walls?

Stick with interior latex paint or acrylic paint for your interior garage walls, as they provide the right balance of durability and safety. If you're worried about moisture or mold, there are interior paints specifically formulated for high-humidity areas, offering added protection against mildew growth.

How long does it take to paint a 2 car garage?

Painting a 2-car garage typically takes 1-2 days, depending on preparation, drying times, and complexity.

Should garage walls be painted flat or satin?

With a choice between two of the most common finishes — flat and satin paint — which do you choose? Overall, a satin finish is the more practical choice for your garage because it is easier to clean and best for high-traffic areas.

How many cans of paint do I need for a 2-car garage?

The amount of paint needed can vary based on the size of your garage and the type of paint, but typically, a 2-car garage could require around 5-6 gallons for two coats of paint.

How much is a good auto paint job?

The average cost to paint a car ranges from $300 to more than $20,000. What you pay depends on various factors, primarily the level of quality you're looking for. Basic paint jobs: These jobs cost $300 to $1,000 and include a single coat of basic paint with minimal preparation and no finish.

What happens if you paint without primer?

Without primer, paint will absorb into the surface instead of forming a film on top. This can cause patchy, uneven color that requires even more coats of paint.

Can you paint over old paint on metal?

If you're painting metal that's already painted and in good condition, use 240 grit sandpaper to rough up the surface. This creates enough of a texture for the paint to stick to. If the old paint is flaking, remove it with a wire brush or sandpaper.

How long to wait between coats of paint?

Glossy paint: 1-1 ½ hours and 2 hours before applying the second coat. Semi-gloss: It takes roughly 1 hour to dry and 2 hours before applying the second coat. Matte Paint: 30 minutes to an hour for drying and 1-2 hours before applying the second coat.

How much does a 5 gallon bucket of primer cover?

Paint usually is applied at 350 to 400 square feet per gallon (primer at 200 to 300 square feet per gallon).

Does paint go bad over time?

How Long Can You Keep Paint Before It Goes Bad? We've all been there—a painting project doesn't use up all the paint you bought, and now it's time to hammer the lid back on and take it to the garage or basement storage area. That paint will go bad in two to fifteen years.

Will 1 quart of paint cover one wall?

One quart of paint can usually cover around 90 to 100 square feet. To give you an idea, that's about the size of a small bathroom wall or a couple of doors.

What is a nice size 2 car garage?

A standard 2-car garage often measures from 24×24 (576 sq. ft.) to 24×30 (720 sq. ft.). While these may be more common sizes, the best size for you depends on the size of vehicles you wish to store and how much extra storage space you want besides vehicle storage.

How much does it cost to build a 24x24 garage?

Site-Built 24×24 Garage Cost: Around $25,000

However, $25,000 is a good entry point for a custom, site-built garage. It is also important to note that while only a site-built garage can make use of the convenience of a concrete floor, that is not included in the $25,000 average price point.

How do I insulate my garage?

To insulate garage walls:
  1. Use a hammer and a screwdriver to remove screws and hooks from the walls.
  2. Remove the wall covering, if any. ...
  3. Check your walls for holes, cracks and gaps.
  4. Cover the area with a sealant.
  5. Let the sealant dry before starting the installation process.
  6. Apply the insulation of your choice.

Previous article
Why is my dishwasher leaking brown stuff?
Next article
How long does it take for plaster of Paris to harden?