To clean calcium buildup out of your toilet, use vinegar or another acidic cleaner. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
Barkeeper's Friend has a thick cleaner that may be useful for this task. Use a plunger to force as much of the water out of the toilet as possible, and apply the BKF to the inside of the entire toilet bowl. If the stains remain, it may be time to give in and use a pumice stone.
After splashing it in your fish 'n' chips, take that white vinegar to the toilet. And don't be stingy – throw a whole litre in there. Let it sit for as long as you have the patience for, and even consider leaving it there overnight. The next day, give that brown stain a good scrub and flush.
Vinegar is a natural acid that can dissolve calcium deposits. You can pour vinegar into the toilet bowl and let it sit for a few hours before scrubbing with a toilet brush. What is this? If vinegar doesn't work, you can try a commercial toilet cleaner that contains acid.
Don't leave CLR for longer than two minutes.
Again, CLR is acidic, which makes it effective, but also means it can cause damage if left in contact with surfaces for too long. Always rinse away with cool water after two minutes of contact.
Use Vinegar & Baking Soda
White vinegar is a natural solution that can be utilized to dissolve calcium buildup. Sitting overnight, you will be able to remove lime buildup from the drain while avoiding the harsh chemicals in traditional drain cleaners. Avoid putting any store-bought chemicals down the drain.
However, you might be surprised to learn that the main cause of the brown discoloration in your toilet bowl is actually hard water. Hard water contains several important minerals that are beneficial to humans, including calcium and magnesium.
To clean calcium buildup out of your toilet, use vinegar or another acidic cleaner. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
Or perhaps you are seeing some black stains in your toilet bowl or dishwasher? These unsightly stains may be a result of high levels of manganese in your water. Manganese is a natural element that is commonly found in water, soil, and some foods and, at appropriate levels, plays a role in keeping us healthy.
In this case, a basic toilet cleaning product may not be enough, and you will need to use undiluted bleach. As a one-stop cleaning solution, pour one cup of bleach around the bowl. Then tackle every inch with a toilet brush or a handheld scrub brush. Let it sit for five minutes, then flush.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
Hard water buildup in your toilet can be one of the most obvious signs. A white or rust-colored ring forming at the waterline or staining at the base of the bowl may appear. In more extreme cases, limescale and calcium accumulation can plug the water jets under the toilet rim, resulting in slow, weak flushes.
Let It Sit For 12 Hours
Leave the vinegar and water mixture in the toilet tank for 12 hours without flushing the toilet. This is why this cleaning process is best done overnight, as you are less likely to need the bathroom throughout the night than during the day.
Borax is a great cleaning product that, when combined with vinegar, can successfully eliminate hard water and mineral deposits. You can use this combination in your toilet and most other plumbing fixtures, too. Here's what you need to do: Grab the Borax and pour ¼ cup into your toilet bowl.
A frequent cause of smelly drains and dirty toilets are urine sediments. Urine scale occurs as urine particles build up on the porcelain. As hard water evaporates, it leaves behind calcium and magnesium deposits which combine to form limescale.
It is quite common for minerals such as calcium and lime, along with debris particles such as rust to build up in the rim feed and jet holes of the toilet bowl. Over time, these deposits restrict and block water from flowing into the toilet bowl which will cause a weak or incomplete flush.
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
"The biggest don't when it comes to toilet tanks is bleach—do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet. If you are aiming to remove tough stains from the tank, I also recommend white vinegar diluted with water."
If you want to really get your toilet tank clean, then you need to make sure you have the right cleaning products for the job. Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits.