Once you have that information, take your total number of pieces and divide by the number of pieces there are per Square Foot (there are 5.33 pieces per Square Foot in our 3x9 example). Example: 100 pieces of 3x9 divided by 5.33 pieces per Square Foot = 18.76 Square Feet.
Multiply the width and length of the tile to find the area it will cover; then, divide by 144 to convert the measurement to square feet. Next, divide the area of the room by the square footage of a single tile. This will tell you how many individual tiles you need to purchase.
Price is per 25 pcs 3x12 individual tile which covers 6 sqft area.
Multiply the length and width of the space you want covered — like from the counter to the cabinets in a kitchen — by 12 to get each measurement in inches. Multiply these two numbers together to get your area, then divide that number by the area of the tile to get the number you will need.
How many 4x4 tiles would I need for 10 sq ft? - Math Central. Chris, If that is (as I suspect) 4" x 4", you need 9 for each square foot, thus 90 overall - if they fit the region you wish to tile perfectly.
Again, multiply the number of paces by 3 to get the width of the area in feet (3 x 3 = 9 ft). Finally, remember that the square footage of any room equals the length times the width of the room. As the last step, multiply 12 ft (length) by 9 ft (width) to get 108 square feet total in your living room.
The total area calculation is 20x20=400 sq. feet. Divide this figure with the size of the tile you want to be installed. This will give you the exact number of tiles required for your space.
It is extremely simple to convert the coverage area to the number of tiles! To begin, calculate the tile square footage by multiplying the tile's length and width in inches. Finally, divide the calculated size of the space by the area of one tile. The result is the exact number of tiles required for the area.
Measurements, Sizes, and Patterns
Tiles are commonly referred to by their "nominal" sizes which might not be the "true" measurement of the material. An example of this is when a 12" x 12" porcelain tile has a "true" measurement of 11-7/8" x 11-7/8".
12 ft. x 10 ft. = 120 sq. ft.
For a 100 square foot tile project, you will need to install a total of 100 12×12 tiles. But some tiles could be damaged during transport or installation or maybe otherwise unusable. It's customary to purchase an additional 15 percent above the exact calculated amount of tile.
Measure the length in feet, Measure the width in feet. Multiply the length figure by the width figure. This will be your total square footage for that portion of your project. Continue to repeat this for all parts of the space that will get the same tile.
Typically, installing ceramic or porcelain tile costs $3-5.5 per square foot, depending on local labor rates and size of the project. Stone tile installation costs are $5-8 per square foot. Installing mosaic tile can cost as much as $9-20+ per square foot, depending on the complexity of design you are looking for.
Labor. Another significant factor in the cost to install tile flooring is labor costs. The national average cost of labor can run between $4 and $14 per square foot. However, to install ceramic or porcelain tile floors, expect to pay anywhere from $4 to $25 per square foot.
Measure the length and width, in feet, of each room. Then, multiply the length by the width to calculate that room's square footage. For example: If a bedroom is 12 feet by 20 feet, it is 240 square feet (12 x 20 = 240). For each room, write the total square footage in the corresponding space on your sketch.
How many tiles are in a box? This will vary depending on the size of the tile. But typically you get anywhere between 6 and 48 tiles in a box. But it's not how many tiles are in a box that is important but the coverage.
How much does it cost to tile a 10-by-10-foot room? On average, it costs between $15 and $20 per square foot to tile a room. For 100 square feet, it would cost between $1,500 and $2,000.
It's defined as the area inside a square that measures one foot per side. Area is equal to length multiplied by width. So, one square foot is equal to an area that's one foot long by one foot wide.
A small 3x6” tile can be set with a 1/16” or 1/8” line, while a mid-size tile like 6x12” or 13x13” would be better with an 1/8” grout line. A large tile, such as 12x24”, usually requires a 3/16” grout line, so it's best to check the manufacturer's recommendations to see how small you can go.
They aren't actually 12×24 inches
Therefore, the metric measurements are 30cm x 60cm. This converts to 11 13/16ths x 23 5/8 inches. Most, but not all, 12×24 tiles on the market will be this size.