The standard height for upper cabinets from the counter is 18 inches, or 1 foot and 6 inches. They shouldn't be less than 15 inches away or more than 20 inches away. This also means the height to where the bottom of your upper cabinets starts. This gives enough space to put things like toaster ovens and blenders.
“The standard distance is 18 inches” from the top of the counter to the bottom of the wall cabinet, Scott says. “But we subscribe to the Scandinavian design aesthetic, and we often put cabinets higher—say, 24 inches above the counter, or even more. That creates a sense of openness and light.”
8 Ft Ceilings – use a 39″ or 42″ upper cabinet
It is generally recommended that wall cabinets be mounted 54 inches up from the floor, which means that for 8 foot ceilings, a 39 or 42 inch upper cabinet will reach the ceiling, depending on the height of the crown molding used at the top of the cabinet.
Most kitchen ceilings are 8 to 9 feet high. You can likely use 42-inch tall wall cabinets, with 12-inch additions on top if needed, to achieve the height you want. You can fill any gaps with crown moulding.
So if you have 10ft foot ceilings, consider bringing your cabinets all the way to the top. Not only does it look grand, but there is no room for dust to fall on top of your cabinets in hard-to-reach areas.
The standard height of the kitchen countertop for Indian kitchens is around 34 inches. By rule of thumb, there should be a gap of 4 inches between the top of the countertop and the elbow when you are standing. The standard depth of a kitchen countertop and the lower cabinets and drawer units should be 2 feet.
If you've come this far and the little gap is still haunting you, there are a few routes you can take. 1) You can ask the installer to seal the gap with caulk, or silicone. 2) You can buy and ornamental molding, and have a handyman cover the gap right up!
Countertops are typically installed after flooring, cabinets, and appliances. This is true for both new builds, and remodeling projects. Since countertops sit directly on the cabinets, the cabinetry must be installed prior to the final measurements, fabrication, and installation.
Upper and base cabinets can match if you want them to. However, if you want to add variation to your space, they don't have to match. It's all about the appearance and mood you would like to achieve.
If you have a top-loading washer, there should be 16 to 18 inches of clearance above the washer to open the door. Stacked washer and dryers and combination units required a vertical clearance of 60 to 76 inches and a horizontal clearance of 24 to 30 inches.
In most cases, it's best to install the flooring first, as this provides a more finished look and makes it easier to install and level the cabinets. However, there are situations where installing the flooring after the cabinets may be more practical.
Usually, the conventional overhang of a countertop should be placed at 1 to 1 ½ inches above the cabinet. At the same time, the bared and exposed ends of a countertop should usually have a ½ inch overhang. The edges that suffice to a wall should not have any overhang to retain the fit flush to the wall.
Mainly it is a matter of cost and ease of installation. Most kitchen cabinets are built in standard sizes and, when mounted on the wall, they leave space up above which gives the installer some wiggle room when leveling the cabinets.
The U-Shape design is the most versatile layout for both large and small kitchens. It provides storage and countertop space on three walls, which creates an efficient work triangle for food prep.
In general, a standard backsplash is installed to be four inches from the surface of the countertop. As of late, however, this height is being overshadowed by 15” installations. These can be made of any material, however, many times they are cut from the same slab as the countertop.
It's better to keep things more accessible,” Ashley says. Always work with your designer to determine what height will look best in your space. “Leave a foot or more between the top of the cabinet and the ceiling. This looks intentional and gives your kitchen the polished, elevated look you're seeking.”
Advantages of Kitchen Cabinets That Go All The Way Up to the Ceiling. It is vital to point out that most people prefer to use 42'' tall upper cabinets as they accord them much more space while also touching the ceiling thus making it appear visibly larger.
1) Never leave crown moldings closer than 9 inches from a ceiling. Once you get within a foot of the ceiling you should have the cabinetry and molding meet the ceiling. Don't create spaces that look odd and that can't be cleaned.
Most homes have kitchen cabinets that are 32 or 36 inches tall, with an interval of 1 to 2 feet between the tops of the cabinets and the ceiling.
An alternative solution in kitchens with taller ceilings is to simply stop the cabinets short of the ceiling and top them with a thick crown molding. The range chimney stretches to the ceiling for functional reasons, but also to contrast the height of the upper cabinets.
Yes and no. It really depends on your preference, the type of cabinet, and more importantly, on the type of kitchen flooring you have and how it is installed. It isn't necessary to have your kitchen cabinets sit on the subfloor, and it certainly isn't the desired option among contractors.
A floating wood floor has to be free to expand and contract with seasonal changes in humidity, and it can't do that with heavy cabinets resting on top of it.
There are pros and cons to each installation order. That said, it is standard for the cabinet to go before the flooring, except under special circumstances as mentioned above.