After sprinkling baking soda on the affected area, it's advisable to let it sit for about 15-30 minutes to allow it to absorb the moisture and neutralize any odors.
Allow the baking soda to work its odor-neutralizing magic overnight (or at least for 4-5 hours). This will give it time to neutralize the foul smells. Baking soda can also be used in this way to remove bad smells from wood furniture.
When cleaning wooden furniture and floors, it is perhaps inevitable to look to baking soda. However, it's a no-no. 'Avoid using baking soda if you want a shiny, wooden floor,' Jack says. 'Baking soda will only harm or deform the hardwood since it is too harsh on the wood sealants used on wooden flooring or furniture.
Try putting baking soda on it over night then vacuuming it. It usually absorbs it right out of the wood. Hydrogen peroxide can also remove the stain but you can't leave it on for too long. I'd try that before redoing the entire floor.
Simply sprinkle baking soda onto a wet stain, leave it overnight and you'll be surprised by the results. Not only will the stain likely be gone, but so too will any related odors – no need for an additional paste. As long as you cover the entire area of the stain with baking soda, it should do the trick!
WAIT: Let the baking soda sit overnight or even longer. The longer the baking soda stays on the stain, the more oil it can absorb. VACUUM: Thoroughly vacuum the area and inspect. In many cases, the stain will be gone!
Woods like mahogany and cherry are great candidates for chemical staining with baking soda but a wood like maple doesn't have much change, as you'll see in the video. The baking soda mixture is simple: 1 Tablespoon of baking soda in 1 cup of water (distilled if possible). Paint the material on the wood and let it dry.
One last trick to remove pet stains from hardwood floors is to use baking soda to absorb liquids, including urine. Baking soda also helps to neutralize odors. Sprinkle baking soda on the damp area, allow enough time for the soda to absorb the moisture, and then wipe up with a towel or paper towel.
Create a 50/50 mixture of white vinegar and warm water in a spray bottle. Spray the vinegar solution liberally over the affected area of wood flooring and allow it to soak for 5-10 minutes. Vinegar helps neutralize odors and prepares the wood for drawing out remaining urine that has soaked deeper into the grain.
Using an enzymatic cleaner will help break down the smell in pee that makes dogs want to pee in that same spot. Nature's Miracle is the brand that I use and it helps stop most peeing.
Baking Soda
Sodium bicarbonate will interact with the oil, staining and dehydrating the wood.
Baking soda and glass don't go together. Don't use this compound near any glass surfaces, including windows, glassware, or glass stovetops, or there is a risk of damaging them. "Baking soda can be abrasive, potentially causing scratches on glass surfaces," says Mock.
Use baking soda to create a powerful cleaner for tile and other types of flooring. Mix ½ cup of baking soda in a bucket of warm water, mop the floors, and rinse. Note: this method should not be used to clean floors that have been treated with wax, such as hardwood flooring, as it can damage the finish.
In some cases, baking soda can cause discolouration on wood surfaces, especially if left to sit for too long. The alkaline nature of baking soda may react with certain types of wood or finishes, resulting in a faded or cloudy appearance.
Cleaning businesses often use specialized wood floor cleaners formulated to remove dirt and grime without damaging the wood's finish. These cleaners may come in spray or liquid form and are designed to effectively lift dirt while protecting the wood's surface.
If you do not have a pet odour remover product and do not want to sand your hardwood flooring, you can use a mixture of household products to remove bad smells. Mix a solution of a drop of dish soap, ¼ cup of baking soda, and 1/3 cup of white vinegar, and place it into a spray bottle.
You can start by sprinkling baking soda on the area. It will help absorb moisture and neutralize the odor. You might need to leave it on overnight. The following day, vacuum the baking soda to help eliminate the urine smell.
When pet urine—dog urine stain or cat urine—comes into contact with wood, it can penetrate the porous surface, causing discoloration and odor. The acidic nature of urine can even alter the wood's chemical composition, leading to challenges in removing the stain and smell.
Apply Hydrogen Peroxide and Dish Soap to the Spot
Fill a small bowl with 3% hydrogen peroxide and a squirt of dish soap. Soak your rag in this mixture and gently wipe down the area, leaving the mixture on for ten minutes. Do not leave it on for longer, as this could cause warping, a common problem with hardwood floors.
Hydrogen peroxide can potentially damage wood floors if it's used improperly. High concentrations of it can bleach the wood, resulting in discoloration.
That unpleasant stench lingers long after the liquid has been absorbed, and can last months unless treated properly. To effectively remove these offending odors, you'll want to make sure you're eliminating them, not just covering up the smell (as many products do).
After sprinkling baking soda on the affected area, it's advisable to let it sit for about 15-30 minutes to allow it to absorb the moisture and neutralize any odors.
Baking Soda
Its alkaline nature neutralizes acidic odors, which are common in food spills or pet accidents. To maximize effectiveness, spread a generous amount of baking soda over the wood surface and leave it for 24 hours. For deeper odors, place a bowl of baking soda inside closed spaces like drawers.
Sprinkle a generous amount of baking soda on the stain and leave overnight if possible (if not overnight then the longer, the better) Vacuum the baking soda up and hopefully your greasy stain will be gone. However, if it is still noticeable, use a small pea-sized drop of washing up liquid to blot the stain.