Once the unit is in the house you should: Leave the appliance to sit for 3 hours. Then plug it in and switch it on. It should then be left overnight to stabilize before putting any fresh food into it.
When a new refrigerator or freezer arrives in their home, most people can't wait to use it. But remember, it usually takes a unit between 6 and 12 hours to get to the proper temperature to safely store food or keep frozen items properly frozen. That wait time gets even longer in hot weather.
Set it upright in its final location and allow the freezer to sit for the same amount of time that it was on its side (24 hours maximum). Do not plug the unit into the electrical receptacle without allowing this settling time. The appliance can be damaged if it is plugged in prematurely.
During transport, the fridge might be tilted, causing the oil to move. If you plug it in right away, the oil might not be in the right place, and there's a risk it could leak into the refrigerant lines and cause blockages.
For Refrigerators and Freezers to maintain the proper temperature, the compressor will run much of the time. Refrigerators and Freezers have compressors that are designed to run 80% to 90% of the time.
Normal Cycling Patterns
So, how often should a fridge/freezer cycle on and off? On average, most refrigerators run for about 45 minutes to an hour before taking a break. This means the compressor is actively cooling your food for around 80–90% of the day.
When can I put food in my new fridge freezer? You can put food in your new fridge freezer after letting it settle for 4 hours if it was transported on its side or 1 hour if it was transported upright. After this amount of time you're absolutely fine and safe to put your food in your new fridge freezer.
It might sound strange to think but a freezer shouldn't run all the time because if it does it will actually build-up to much ice. This can make your freezer to cold and will make opening it and then closing it a problem, it will also be sure to put more stress on the motor.
How long should you leave a fridge freezer to settle? You should leave your fridge/fridge freezer to settle for at least 4 hours. Once 4 hours have passed, you can plug your appliance in. When doing so, make sure that the thermostat control is set to on.
The refrigerant used to make the appliance work has to settle before you can plug it in. Please wait 2 hours before you plug it in. If you plug it in straight away it is possible that damage may occur to your new appliance. The refrigerant used to make the appliance work has to settle before you can plug it in.
The Compressor Pulls Up the Gas and the Cycle Starts Again
However, your refrigerator does not—and should not—run constantly. Every 12 to 15 hours, the refrigeration defrost cycle should begin, which uses a defrost heater to melt any frost that has accumulated on the evaporator coils.
Never try to move a full freezer. A freezer with food adds extra weight, making it harder to move.
A freezer should be cold enough to keep food frozen and preserve it until they are ready to be cooked or reheated. Just as with a fridge, place an appliance thermometer in the freezer to make certain the temperature is optimally set and check it regularly to make sure it stays constant.
Sometimes you can troubleshoot a freezer that's not freezing by simply reorganizing the shelves. Overpacked freezer shelves can block proper airflow, which can alter the internal temperature. Avoid overfilling your freezer and keep the evaporator fan unobstructed.
Once the unit is in the house you should: Leave the appliance to sit for 3 hours. Then plug it in and switch it on. It should then be left overnight to stabilize before putting any fresh food into it.
Humming, clicking, buzzing, or other noises coming from your freezer are often part of its normal operation. For example: A low humming or buzzing noise can be heard when the compressor is running. A clicking sound can be heard when the defrost timer switches on and off.
When you add food to the refrigerator, it technically reduces the space inside that must be cooled. The appliance doesn't have to run as long because the space is filled. An empty refrigerator, however, creates a larger space to cool. As a result, the compressor runs a lot to create a consistent temperature setting.
Echoing this recommendation by appliance manufacturer Whirlpool, the representative told us, “75-80% full as a best operating condition seems reasonable, though it'd really depend on the air flow and spacing.” That is, in order to keep your freezer working properly, you need to keep food from blocking the air vents, ...
Upon initial installation or when the settings on the temperature controls are changed, it usually takes 24 hours for an upright or chest freezer to reach the proper temperature.
Turning the fridge on too soon can lead to a coolant rush, which can cause problems like leaks or blockages. This can damage the fridge, and you may need to pay for expensive repairs. Waiting allows the coolant to settle back into its correct position and ensures that there are no leaks or blockages.
Fridge temperature settings are generally numbered from 1 to 5, with 5 being the coldest. A fully stocked fridge may need to be set to a higher setting (around 3 or 4), whereas one with more space is best suited to temperature setting 2 or 3.
The easiest way to diagnose a problem with your freezer's compressor is by listening for its routine humming sound. Pay attention to your freezer for at least 30 minutes. If the humming sound doesn't kick in within that time, the compressor may not be working correctly. Schedule a visit with a technician for more help.
For a freezer to maintain the desired temperature of 0 degrees F, the compressor will usually run more than 50% of the time.
Freezer compressor replacement costs between $250 and $650. The compressor keeps the temperature balanced in the freezer by moving coolant, or freezer gases, through the freezer unit. If the compressor malfunctions, it may be unable to achieve the desired temperatures or have uneven temperatures in different sections.