The revised language in the NEC allows a built-in dishwasher to have a cord length between 3 feet and up to 6.5 feet. The receptacle for a built-in dishwasher should be located next to the space occupied by the dishwasher according to new item 6.
What the dishwasher comes with is a corded electrical box for hardwiring the dishwasher to your home wiring. It seems you're meant to mount that electrical box inside the sink cabinet which is usually next to your dishwasher. It has a cord about 4ft long.
We recommend to never use an extension cord to connect your dishwasher to an electrical outlet. Yes, using an extension cord will work, but it's extremely dangerous. Your power cord will eventually overheat, causing your cord and anything surrounding the cord to melt.
This is the part number for the manufacturer's cord and it is just over 5 1/2 feet long and will only require that you plug it in to the back of the dishwasher and then into the wall. No need for an electrician or to tackle wiring the junction box.
Correct Plug Type
Most heavy-duty household appliances, such as geysers and dishwashers, use 15-amps three-prong cord.
Dishwasher – A large range of dishwashers use the standard current of 110 volts. It is best to use an outlet that has a Ground Fault Interrupter or GFI. This will provide an extra precaution if the outlet gets wet. A GFI is designed to trip or disconnect power to prevent electrocution.
Large Kitchen Appliances (Refrigerator, Dishwasher, etc.)
These appliances are so high-powered that they'll easily overload a poor, little power strip. Plug your large appliances directly into the wall. Do not use a multi-outlet converter to plug in more things, or you'll risk tripping the circuit.
All Bosch dishwashers come with 110v power cord for plugging into wall outlet. If you are hardwiring then you must use the Bosch power cord with junction box accessory.
Newer Bosch dishwashers use a special power cord that plugs into the back of the unit. It comes with a standard 3-prong cord that works if you have an outlet for power. If you have a hardwired dishwasher, this box allows for an easy-to-wire junction box with a white, black and green terminal.
Unlike plug-in appliances, a dishwasher must be hardwired and hooked up to the home's plumbing. If you're for the challenge of installing it yourself, you can save a lot of money.
The dishwasher circuit needs to be dedicated to 120/125-volt. A 14/2 NM wire is fed into this 15-amp circuit. You can also feed the dishwasher with a 20-amp circuit using 12/2 NM wire.
Household dishwashers use 10 amps of power, mostly. Having said that, your breaker should be on a higher rating than the appliance being used for safety purposes.
Can You Put an Electrical Outlet Under A Sink? The National Electrical Code, a minimum standard for electricians in the United States, allows for electrical outlets to be placed under the sink. However, all electrical outlets within a distance of 6 feet from the sink must have GFCI protection.
Each dishwasher comes with a junction box (with power cord) to be installed in a cabinet next to the dishwasher cutout. It can be installed by an installer, servicer, technician, electrician or other qualified professional and is intended for hard-wired installations.
Dishwasher Circuit
When installing a dishwasher, the circuit should be a dedicated 120/125-volt, 15-amp circuit.
No, not all dishwashers are hardwired. Instead, you can purchase dishwashers that come prepared with an electrical cord and a three-prong plug. These units will easily connect to a regular wall socket that you'd have in your household kitchen.
Door in open position . .. . The dishwasher comes with a seven (7) foot drain hose. A 1.25" access hole must be made to allow the drain hose to be run to the drain connection location.
Dishwashers are hardwired. They consume a relatively high amount of power, so it is not advised to use the same method to connect your other household appliances.
A: This is needed for a hard wired installation as the cord that comes with the dishwasher is only for plugging into a three prong outlet. The plug side of this is for connecting to the back of the dishwasher and the junction box at the end of it is for a hard wired connection.
The receptacle for a built-in dishwasher shall be located in the space adjacent to the space occupied by the dishwasher.
Maximize your outlets using the Staples 15ft. Cord 6-Outlet Power Strip. This multi outlet general purpose power strip features six grounded (3-prong) outlets and an integrated circuit breaker for overload protection that will interrupt power in the event of a dangerous power surge.
Kitchen dishwashers installed in dwelling units require GFCI protection whether hard wired or cord and plug connected. Code Change Summary: A new subsection was added regarding dwelling unit kitchen dishwashers. Now, outlets that supply dwelling unit kitchen dishwashers must have GFCI protection.
It must be a GFCI, and it must be within 3 feet of the edge of the sink. Either behind or beside the sink is acceptable -- across from the sink on an opposite wall is not. If the bathroom has two sinks, each must have an electrical receptacle within 3 feet.
(SOURCE: DCLG; Fire Statistics, Great Britain April 2013-March 2014). Electrical sockets or switches should be fitted at a safe distance (it is recommended at least 30cm horizontally) from a sink to avoid the chance of water coming into contact with electricity. Sockets should also be easily accessible.