So if you buy liquid shock, be aware that it only lasts one to two months at the most before it starts to lose effectiveness. While many swimming pool chemicals stay good for years if stored correctly, some pool-maintenance supplies expire more quickly.
Properly stored, pool shock has a shelf life of over 5 years.
All pool chemicals, aside from unstabilised liquid chlorine, are good for up to three to five years as long as they're stored in a cool and dark place away from sunlight and they're packed in air-tight containers. Granular chlorine can be re-packed to extend its shelf life.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
And how long do you have to wait before you can swim? You should wait one hour per pound of shock product added, and then test the water to confirm the pH and chlorine are in the proper range before letting anyone enter the pool.
But if the cloudy water persists long after you've shocked the pool, you're likely having an issue with water balance, circulation, or filtration. Heavy use of a calcium based pool shock (cal-hypo) may increase Calcium Hardness over a period of time, increasing your odds of cloudy water.
After Shocking Your Pool
It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
Shocking your pool isn't necessary, although, it's not a bad idea either. If you get an extremely heavy rain fall, you could shock your pool for good measure. This will help fight off any contaminants that the rain may have brought to your pool.
The best time of day to shock pool is when the sun is down. So, experts recommend shocking your pool in the evening or at night, to make sure it does its job. Shocking during the day can be ineffective as UV rays from direct sunlight significantly reduce free chlorine levels.
It's pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn't be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.
We suggest shocking the pool every week to two weeks; with hot weather or increased use, you may need to shock more often. When tabs run out, replace them.
This works out to once every day or two. Testing at this frequency should ensure you are able to keep free chlorine levels at recommended ranges of 2.0 to 4.0+ ppm, assuming no unusual activity or events cause a spike in contaminants.
Do Chlorine Tablets Go Bad? The simple answer to this question is yes. Like any chemicals, chlorine tablets go bad if left long enough or improperly stored. Kept in the right conditions, however, and they can remain effective for over five years.
A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.
Keep your pump and filter running. Give the shock a good 12 to 24 hours to work it's magic. If the algae hasn't cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.
Solution. Never close the cover immediately after shocking the pool. It is recommended to wait several hours before closing the cover. Use a test kit to regularly test the pool water.
Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity.
Running your pool pump during a lightning or electrical storm should be avoided as a power surge or nearby lightning strike could damage your pump. However running your pump during is beneficial. The extra filtering will help clean out the impurities rain has introduced into your pool's water.
It is a fact that rain will decrease your Total Alkalinity level in the pool over time, requiring a pool owner to raise the alkalinity. Rainwater has a Total Alkalinity near zero. Heavy rains will dilute your pool alkalinity level, causing it to fall by 5-10 ppm a day.
It Should Not Be Done Together
This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
Heavy shocking with granular chlorine will generally require 24-48 hours before the chlorine level has dropped to safe swimming levels (below 5 ppm).
Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.
1. Shock the pool with chlorine every day until all the green is gone (possibly 3 to 4 days). 2. Run the filter 24 hours a day and backwash every day until the green and then cloudiness is gone (usually up to 7 days, sometimes as long as 2 weeks depending on the filter).
It's often recommended to shock your pool once a week. If you don't do it every week, you should at least do it every other week. This is necessary to maintain your pool's water chemistry. If you have a lot of people over in your pool or have a party, you may want to shock your pool more frequently.