The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity. Forget this plan if you are using well water, you will burn up your pump or leave your home without water for days.
It would take 25 hours to fill 10,000 gallons.
It would take 31.25 hours to fill a 15,000 gallon swimming pool if your water pressure is 8 gallons per minute and your outside water hose is 480 gallons per hour.
Nine gallons per minute is how much a standard garden hose releases. 540 gallons an hour is how much it is. It will take 37 hours to fill a 20,000-gallon pool.
What Is The Fastest Way To Fill A Big Pool? The fastest way to fill a big pool is by using a water delivery service, or a city fire hydrant. Note that using city fire hydrants to fill your swimming pool requires special permission from your local fire department, and rules differ from state to state.
Most people head to the hose, and that is a viable solution if you are a very patient person, have multiple hoses and are not using well water. The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away.
Although it may take several hours to fill your pool completely, make sure that someone is available to continuously checking on the pool. It is never recommended to leave your home during this time or to fill your pool overnight.
Splitting that into two lines will not likely double the flow rate as there is a pressure drop, but it should increase the total flow rate considerably. I would expect it to almost double, but not quite.
It is recommended you have your water level between one-third and one-half up the swimming pool skimmer box opening. If the level is higher than that, it may slow or even stop debris from being pulled into the skimmer box through the plate or valve.
At an average of $0.004 per gallon, city water is the most inexpensive and most popular option. For 15,000 to 30,000 gallons, you'll pay between $60 and $120.
For the smallest Intex Easy Set, that's 10 feet in diameter and has a depth of 30 inches, it will take about 1.5 hours for it to be filled up to 80% of its capacity using a hose with a 12 GPM flow rate.
As we said above, you can fill your swimming pool or hot tub with well water. In fact, it's one of the least expensive options, especially compared to a pool water delivery service. Some people choose to fill their pools with city water or municipal water from their house, but not everyone has this option.
A water truck load is about 10X the cost of filling with hoses from the local water company. Check your local water rates. How many gallons is your pool?
If it takes 45 seconds to fill the 5 gallon bucket, thats 6.6 gallons per minute or 396 gallons per hour. So.. to fill 10,000 gallons it would take ~25 hours.
You can fill your pool with a hose from the tap, just like you would with city water. But remember that you'll be moving many thousands of gallons of water through your softener system, so be sure to factor in the cost of salt and the electricity required to pump the water to your pool.
If you've got a 13,000 gallon pool, it would take about 24 hours to fill your pool.
Calculating Your Swimming Pool Water Pump Needs
Now convert that to GPM: 30,000 gallons ÷ 24 hours = 1250 gallons/hour. 1250 gallons/hour ÷ 60 minutes = 20.8 gallons/minute (GPM)
Draining a pool can take up to 14 hours, depending on the size, so be sure to drain it on a day when you have sufficient free time. You need to be home to check on the pool, the hoses, and the pump frequently. Do not let the pump run dry or it can become damaged.
Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you'll only be adding liquid chlorine, it's generally safe to swim after about 4 hours or until levels are 5 ppm or lower.
At first you'll add chlorine in what's called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning.
Check to make sure that you will have sunny weather and temperatures of at least 75 degrees Fahrenheit on the day you want to fill your above ground pool.
A typical garden hose flow rate is usually between 9 and 17 gallons per minute. The average garden hose GPM would be around 12 to 13, but this can vary depending on the type of hose.
In terms of volume, when full, these pools hold 2.5 million liters of water or about 660,000 gallons. If you used a normal garden hose to fill one of these pools, it would take roughly 19 days to get it full.