If the framing isn't too complicated, an experienced drywall crew can finish a 2,000-square-foot house within a week. A single room or basement could take a few days, while larger homes may take three or four weeks.
Drywall costs $0.50 to $0.80 per square foot for materials. The labor cost to hang and finish drywall is $1.00 to $2.70 per square foot. The cost to drywall a 12' x 12' room is $580 to $1,800. The cost to drywall a 2,000 square foot house is $8,000 to $30,000.
You need roughly 150 to 160 4×8′ sheets of drywall for a 2000-square-foot home. In total, that's about 8,000 to 9,000 square feet of drywall.
How Long Does It Take to Drywall a House on Average? For a standard-sized home of 2,000–3,000 square feet, it generally takes about: 7–10 days for professionals to complete the entire process, from hanging to finishing. 10–15 days for DIY projects, depending on skill level and available time.
Cost To Finish Drywall per Square Foot
Labor costs are typically between $1.00 to $2.50 per square foot. For all the materials, installation with labor costs, and finish, you should budget for $1.50 to $3.50 per square foot.
Drywall Finish Level 5. The highest drywall finish level is the most expensive and only recommended for specific areas with angled or low lighting that highlight bumps and depressions in gloss, enamel, or non-textured flat paints.
If the framing isn't too complicated, an experienced drywall crew can finish a 2,000-square-foot house within a week.
Fortunately, fast-drying setting-type compounds allow you to do just that. Setting-type joint compounds harden chemically in anywhere from 20 minutes or 30 minutes to 4 hours or 5 hours, depending on the type used. The compounds with the shortest setting times are ideal for one-day finishing.
Hang the Ceiling First
This makes it much easier to manage and attach the panels since you will not have to fumble around with the screws, measuring tape, and so on. Screws for drywall lids should be placed no closer than 16” from the wall. This allows the drywall to have a bit of flexibility to prevent ceiling cracks.
Measure By Square Footage:
The standard drywall service charges range from about $0.24 – $0.70 per sq. ft. discluding the labor markup. The price that contractors charge for drywall installation ranges from $1.50-$3.00 per square foot.
To make the average amount of energy used by a home in America, a 2,000 sq. ft. home would need between 16 and 21 solar panels. That's assuming the home has a good south-facing roof that gets a full amount of sunlight every day.
Estimate Joint Compound As a general rule, estimate 0.053 pounds of mud per square foot of drywall. So, multiply the total number of square feet by 0.053 to determine how many pounds of compound you'll need.
Rule of Thumb: Estimate approximately 1 sheet of drywall (4 ft x 8 ft) for every 32 to 48 square feet of wall surface. For paint, estimate 1 gallon for every 350 to 400 square feet of wall area.
The cost to insulate a 2000-square-foot house can range from $2,000 to $6,000, depending on the type of insulation used and other factors.
You can use all-purpose compound for all three coats, but if you're doing a bigger job; using taping compound for the first 2 coats, and finishing compound for the last, will make everything go smoother.
On the other hand, if the drywall is not sealed properly, it won't be able to function as a fire-suppressant. This is the main reason it is against the building code in many areas to have an unfinished drywall.
On average, after drywall installation, it typically takes 4 to 6 weeks to complete the home, though this can vary based on several factors like weather, the availability of materials, and the complexity of customizations.
So, to fully paint the interior of an average-sized 1,500 – 2,000 square foot home, you can plan on it taking around 3 – 6 days from start to finish. This depends on the following 6 variables: The amount of furniture that requires moving. The size of the paint crew.
Typically, it will take about two hours to clean a 1000 square foot house or apartment, while homes between 2000-3000 square feet will require at least a three hour cleaning session.
The average cost to finish drywall is $1.50 to $3.50 per square foot for labor and materials. The cost to tape and mud drywall is $0.35 to $1.10 per square foot and is typically included with finishing. Finishing drywall in a 12' x 12' bedroom costs $580 to $1,800.
The result is PVC-based replacements for traditional drywall and fiber-reinforced plastic (FRP) panels. They are reusable, recyclable and durable. Trusscore is an innovation that has applications in many sectors; it can be used in residential and commercial construction, as well as agriculture.
A Level 5 drywall finish involves an additional skim coat of joint compound over the entire surface, providing the highest-quality finish. This level is essential for areas with critical lighting conditions, where the appearance of the wall is paramount. It can deliver a smooth, uniform surface.