Another larger option, that provides more variety in its use is a 29" double bowl sink. This sink will fit in your 30" kitchen sink base cabinet and provide you with two 16x13"basins.
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
The most common sink sizes for a 30-inch cabinet are 24 to 27 inches wide. These sizes offer a comfortable fit within the cabinet and provide enough room for daily use.
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.
If there isn't enough width available in the cabinet, you won't be able to go for the bigger sink, even if there is room on the counter. Also, remember that you are going to have to create a larger hole in the counter to suit the new sink.
In general your sink should be at least 2-3” smaller than your cabinet size. For example, a 36” sink base cabinet can easily fit a 33” sink.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Standard Kitchen Sink Sizes to Know
On average, customers who purchase single-bowl sinks prefer 30-inch-long dimensions at most. Experts recommend at least 22 to 27-inches in length, which also works for small kitchens.
Sink Landing Counter Space
The landing space requirement at a main sink is 24″ on one side and 18″ on the other side. The countertop landing area beside the main sink helps with Clean-up duties. With the dishwasher typically places on one side of the main sink the 24″ landing counter is taken care of.
A typical 33 x 22-inch sink will fill a 36-inch base cabinet. If you're replacing a sink, make sure it fits the existing cutout. If the cabinet allows, you may be able to install a larger sink by expanding the cutout. A farmhouse sink may require a special cabinet size.
Some sinks will be labeled 30" Kitchen sink, but the basin size is in fact 28". [This sink will fit!] While other sinks are named after their TRUE 30" basin size [This will NOT fit]. Which means you CAN fit some "thirty" inch sinks in a 30" kitchen sink base cabinet.
It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
The standard size for a kitchen sink can vary, but a typical size for a single-bowl sink is around 30 to 33 inches in width and 20 to 22 inches in depth. Double-bowl sinks can range from 30 to 48 inches in width, depending on the bowl size and configuration.
Consider the size of the sink. The base cabinet should be wide enough to accommodate the sink, with additional space on either side for plumbing and dish soap. It should also be deep enough to prevent water from spilling out onto the floor. Think about the type of material you want the cabinet to be made of.
Standard sink base cabinet dimensions range from 30 to 42 inches wide. 30 inches is the standard single basin sink base width. 33 inches is the typical double-basin, offset sink cabinet size. 36 inches is the standard double-basin sink cabinet dimension.
Start by measuring the depth of your cabinet. Place your tape measure along the bottom of the cabinet and measure from the back to the front edge. Next, measure the total width. Place your tape measure along the bottom of the cabinet to measure from the left edge to the right edge.
As a general rule of thumb, you will want at least a 1/2" of clearance on both sides between the lip of the sink and the inside walls of the cabinet (1/4" is tight, but doable!).
A 33" sink will undermount into a 33" cabinet if you strap or harness, not clip or block, the sink in place. Disregard the sink manufacturer's instructions please; I've done this hundreds of times.It is not a difficult process at all.
Many experts suggest that any kitchen should have at least a minimum amount of 13 feet of countertop surface. Trying to squeeze more countertop than this into a small kitchen could rob the room of other features like a sink or stove large enough to meet your needs. Or it may make the room hard to safely walk around in.
The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length.
A 27" sink will undermount into a 27" cabinet. A 33" sink will undermount into a 33" cabinet, etc.
In general, the standard sink size is 22” x 30”. While single bowl sinks can have a width upto 36 inches, double bowl sinks can go upto 48 inches.
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
Besides, in order to avoid backsplash spots at the bottom of the upper cabinet, please leave more space between the upper cabinet and the sink. Usually, the upper cabinets should be at least 12 inches above the sink.
A 33" cabinet will only fit a 30" sink.